Automated irrigation systems for wheat and tomato crops in arid regions

Automated irrigation systems (AISs) are critical for the sustainability of irrigated farming systems, considering the present water crisis in Saudi Arabia. This study investigated whether electronic controllers in irrigation systems effectively save water. The study also assessed the effect of these controllers on crop yield using drip and sprinkler irrigation systems in severely arid climate conditions. Evapotranspiration (ET) controllers were installed in experimental fields of wheat (Triticum aestivum) and tomato (Solanum lycopersicum Mill.) crops for 2 successive seasons. The results revealed that the water use efficiency (WUE) and irrigation water use efficiency (IWUE) were typically higher in the AIS than in the conventional irrigation control system (CIS). Under the AIS treatment, the WUE and IWUE values were 1.64 and 1.37 k·gm-3 for wheat, and 7.50 and 6.50 kg·m-3 for tomato crops; under the CIS treatment the values were 1.47 and 1.21 kg·m-3 for wheat and 5.72 and 4.70 kg·m-3 for tomatoes, respectively. Therefore, the AIS provided significant advantages in both water savings and crop yields by utilising up to 26% less water than the CIS, and simultaneously generating higher total yields. The automated irrigation system technique may be a valuable tool for conserving water and scheduling irrigation for wheat and tomato crops, and may be extendable to other similar agricultural crops.Keywords: autonomous control, evapotranspiration controller, water conservation, sprinkler and drip irrigation, water-use efficiency, arid region

A scoping review establishes need for consensus guidance on reporting health equity in observational studies.

To evaluate the support from the available guidance on reporting of health equity in research for our candidate items and to identify additional items for the Strengthening Reporting of Observational studies in Epidemiology-Equity extension. We conducted a scoping review by searching Embase, MEDLINE, CINAHL, Cochrane Methodology Register, LILACS, and Caribbean Center on Health Sciences Information up to January 2022. We also searched reference lists and gray literature for additional resources. We included guidance and assessments (hereafter termed "resources") related to conduct and/or reporting for any type of health research with or about people experiencing health inequity. We included 34 resources, which supported one or more candidate items or contributed to new items about health equity reporting in observational research. Each candidate item was supported by a median of six (range: 1-15) resources. In addition, 12 resources suggested 13 new items, such as "report the background of investigators". Existing resources for reporting health equity in observational studies aligned with our interim checklist of candidate items. We also identified additional items that will be considered in the development of a consensus-based and evidence-based guideline for reporting health equity in observational studies

Reporting of health equity considerations in cluster and individually randomized trials

CITATION: Petkovic, J., et al. 2020. Reporting of health equity considerations in cluster and individually randomized trials. Trials, 21:308, doi:10.1186/s13063-020-4223-5.The original publication is available at https://trialsjournal.biomedcentral.comBackground: The randomized controlled trial (RCT) is considered the gold standard study design to inform decisions about the effectiveness of interventions. However, a common limitation is inadequate reporting of the applicability of the intervention and trial results for people who are “socially disadvantaged” and this can affect policy-makers’ decisions. We previously developed a framework for identifying health-equity-relevant trials, along with a reporting guideline for transparent reporting. In this study, we provide a descriptive assessment of healthequity considerations in 200 randomly sampled equity-relevant trials. Methods: We developed a search strategy to identify health-equity-relevant trials published between 2013 and 2015. We randomly sorted the 4316 records identified by the search and screened studies until 100 individually randomized (RCTs) and 100 cluster randomized controlled trials (CRTs) were identified. We developed and pilottested a data extraction form based on our initial work, to inform the development of our reporting guideline for equity-relevant randomized trials. Results: In total, 39 trials (20%) were conducted in a low- and middle-income country and 157 trials (79%) in a high-income country focused on socially disadvantaged populations (78% CRTs, 79% RCTs). Seventy-four trials (37%) reported a subgroup analysis across a population characteristic associated with disadvantage (25% CRT, 49% RCTs), with 19% of included studies reporting subgroup analyses across sex, 9% across race/ethnicity/culture, and 4% across socioeconomic status. No subgroup analyses were reported for place of residence, occupation, religion, education, or social capital. One hundred and forty-one trials (71%) discussed the applicability of their results to one or more socially disadvantaged populations (68% of CRT, 73% of RCT). Discussion: In this set of trials, selected for their relevance to health equity, data that were disaggregated for socially disadvantaged populations were rarely reported. We found that even when the data are available, opportunities to analyze health-equity considerations are frequently missed. The recently published equity extension of the Consolidated Reporting Standards for Randomized Trials (CONSORT-Equity) may help improve delineation of hypotheses related to socially disadvantaged populations, and transparency and completeness of reporting of health-equity considerations in RCTs. This study can serve as a baseline assessment of the reporting of equity considerations.https://trialsjournal.biomedcentral.com/articles/10.1186/s13063-020-4223-5Publisher's versio

Processing conditions and mechanical properties of high speed steel parts fabricated using direct selective laser sintering

NoThis paper reports the results of an investigation into the selective laser sintering of a prealloyed high-speed steel powder. The structured development of processing conditions for single lines, single layers and multiple layers of material is reported, as are the flexural modulus and strength of the single- and multiple layer components. Infiltration with bronze was used to improve the mechanical properties of the components and it is concluded that selective laser sintering of high-speed steel allied to bronze infiltration can produce material with the mechanical properties to allow for use in load-bearing applications, but that further work is required to improve the density, mechanical properties and build rate if selective laser sintering is to develop as a general manufacturing process for hard metals

Preparation and Properties of Ti-Y2O3 Composites for Implant Applications

The paper presents the preparation of Ti-(1-30wt.%)Y2O3 composites using the mechanical alloying process. Ti based materials are the best metallic biomaterials because of their excellent properties: biocompatibility, low Young moduli and high corrosion resistance. Pure Ti and Y2O3 powders were alloyed under argon atmosphere in shaker type mill (Spex 8000) followed by pressing and sintering. The ultra-low grain size structure improves the mechanical properties and hardness of the new materials in comparison to microcrystalline Ti-based sinters. However, because of the porosity of approx. 20-30%, a decrease in the Young modulus is observed. Moreover, the new composites show good tendency towards covering by Ca-P compounds during soaking in SBF

Adaptation to the Impacts of Sea Level Rise in Egypt

adaptation, climate change, socioeconomic impacts, Egypt,

Semiotic analysis of contemporary Coptic Orthodox church architecture; A case study of Virgin Mary and Saint John the Baptist church in Bab El Louk, Cairo, Egypt

Within the quest of better understanding of architecture, interpretation of signs and symbols play an important role. An article was presented earlier to analyze an ancient Coptic Orthodox church, within the course of an ongoing PhD, studying the visual message of this architecture (Guirguis et al., 2016). Now, a contemporary case study is being examined, to investigate whether the modern architecture of the same building type carries a message as its counter in the antiquity, and what the meanings projected might be. The study uncovers meanings imbued by the building showing that this contemporary architecture is an offspring of the Coptic heritage and that it delivers a message to the congregation. Keywords: Semiotics of architecture, Coptic architecture, Meaning in architecture, Semiotic analysis, Interpretation of architecture, Contemporary Coptic architectur

Mechanical Properties and Wear Behavior of a Novel Composite of Acrylonitrile–Butadiene–Styrene Strengthened by Short Basalt Fiber

Polymer matrix composites (PMC) have a competitive and dominant role in a lot of industries, like aerospace and automobiles. Short basalt fiber (SBF) is used to strengthen acrylonitrile–butadiene–styrene (ABS) polymers as a composite. The composite material is fabricated using injection molding with a new technique to obtain a uniform distribution for the ABS matrix at an elevated temperature range from 140 °C to 240 °C. Four types of specimen were produced according to the mechanically mixed amounts of SBF, which were (5, 10, 15, 20) wt %. The produced material was tested for tension, hardness and impact to measure the enhancement of the mechanical properties of the ABS only and the ABS reinforced by SBF composite. Wear tests were carried out using a pin on disc at a velocity of 57.5 m/s at three normal loads of 5, 10 and 15 kN. Tensile strength increased with up to 5 wt % of SBF, then decreased with an increasing amount of SBF reinforcement, while surface hardness increased with increasing SBF. The impact strength was found to degrade with the whole increment of SBF. Wear resistance increased with the increasing SBF reinforcement amount at all applied normal loads