Modelo de cuantificación del consumo energético en edificación

The research conducted in this paper focuses on the generation of a model for the quantification of energy consumption in building. This is to be done through one of the most relevant environmental impact indicators associated with weight per m2 of construction, as well as the energy consumption resulting from the manufacturing process of materials used in building construction. The practical application of the proposed model on different buildings typologies in Seville, will provide information regarding the building materials, the subsystems and the most relevant construction elements. Hence, we will be able to observe the impact the built surface has on the environment. The results obtained aim to reference the scientific community, providing quantitative data comparable to other types of buildings and geographical areas. Furthermore, it may also allow the analysis and the characterization of feasible solutions to reduce the environmental impact generated by the different materials, subsystems and construction elements commonly used in the different building types defined in this study.La investigación realizada en el presente trabajo plantea la generación de un modelo de cuantificación del consumo energético en edificación, a través de uno de los indicadores de impacto ambiental más relevantes asociados al peso por m2 de construcción, el consumo energético derivado del proceso de fabricación de los materiales de construcción empleados en edificación. La aplicación práctica del modelo propuesto sobre diferentes tipologías edificatorias en Sevilla aportará información respecto a los materiales de construcción, subsistemas y elementos constructivos más impactantes, permitiendo visualizar la influencia que presenta la superficie construida en cuanto al impacto ambiental generado. Los resultados obtenidos pretenden servir de referencia a la comunidad científica, aportando datos numéricos que podrán ser comparados en otras tipologías y ámbitos geográficos, a la vez que permitirán analizar y precisar mejoras en cuanto al impacto ambiental generado por los diferentes materiales, subsistemas y elementos constructivos habitualmente utilizados en las tipologías edificatorias definidas

Mean and Flux Horizontal Variability of Virtual Potential Temperature, Moisture, and Carbon Dioxide: Aircraft Observations and LES Study

The effects of the horizontal variability of surface properties on the turbulent fluxes of virtual potential temperature, moisture, and carbon dioxide are investigated by combining aircraft observations with large-eddy simulations (LESs). Daytime fair-weather aircraft measurements from the 2002 International H2O Project¿s 45-km Eastern Track over mixed grassland and winter wheat in southeast Kansas reveal that the western part of the atmospheric boundary layer was warmer and drier than the eastern part, with higher values of carbon dioxide to the east. The temperature and specific humidity patterns are consistent with the pattern of surface fluxes produced by the High-Resolution Land Data Assimilation System. However, the observed turbulent fluxes of virtual potential temperature, moisture, and carbon dioxide, computed as a function of longitude along the flight track, do not show a clear east¿west trend. Rather, the fluxes at 70 m above ground level related better to the surface variability quantified in terms of the normalized differential vegetation index (NDVI), with strong correlation between carbon dioxide fluxes and NDVI

Fluencia en compresión de compuestos de AI2O3-SIC con distintas geometrías de reforzante

Se ha analizado la fluencia en compresión de un compuesto cerámico con matriz de alúmina reforzada con un 30% en volumen de plaquetas de SiC. Los ensayos se realizaron a 1400 °C, con velocidades de deformación entre 10'^ y x 10'^ s"\ y tensiones sobre muestra de hasta 400 MPa, alcanzándose estados cuasi estacionarios de deformación. Los resultados se comparan con los de varios compuestos de alúmina reforzada con distintos contenidos de whiskers de carburo de silicio, obtenidos previamente en idénticas condiciones experimentales. A la luz de consideraciones ampliamente aceptadas sobre los mecanismos de fluencia que actúan en estos compuestos, se discute la idoneidad de las distintas representaciones para una mejor comprensión del efecto de los reforzantes, en particular su acción como inhibidores de la fluencia por deslizamiento con acomodación de las fronteras de grano por debajo de una determinada tensión umbral.Results of compressive creep of an alumina matrix composite reinforced with different contents of silicon carbide platelets or whiskers, at temperature of 1400 C, with creep rates ranging from 10"^ to 10"^ s"-^, and true stresses up to 400 MPa has been analized. At this temperature cuasi steady-sates of deformation were achieved. New data is presented, for the material reinforced with platelets, and are compared with those obtained in the same experimental conditions for other composites reinforced with whiskers. From widely accepted considerations about the mechanisms responsible for the high temperature diffusional creep in these composites, different types of data analysis and representation of the results are showed in order to understand the effect of the reinforcements, particularly the effect on the stress tresshold needed to activate the sliding of grains during diffusional controlled creep

Modelo de cuantificación del consumo energético en edificación

The research conducted in this paper focuses on the generation of a model for the quantification of energy consumption in building. This is to be done through one of the most relevant environmental impact indicators associated with weight per m2 of construction, as well as the energy consumption resulting from the manufacturing process of materials used in building construction. The practical application of the proposed model on different buildings typologies in Seville, will provide information regarding the building materials, the subsystems and the most relevant construction elements. Hence, we will be able to observe the impact the built surface has on the environment. The results obtained aim to reference the scientific community, providing quantitative data comparable to other types of buildings and geographical areas. Furthermore, it may also allow the analysis and the characterization of feasible solutions to reduce the environmental impact generated by the different materials, subsystems and construction elements commonly used in the different building types defined in this study.La investigación realizada en el presente trabajo plantea la generación de un modelo de cuantificación del consumo energético en edificación, a través de uno de los indicadores de impacto ambiental más relevantes asociados al peso por m2 de construcción, el consumo energético derivado del proceso de fabricación de los materiales de construcción empleados en edificación. La aplicación práctica del modelo propuesto sobre diferentes tipologías edificatorias en Sevilla aportará información respecto a los materiales de construcción, subsistemas y elementos constructivos más impactantes, permitiendo visualizar la influencia que presenta la superficie construida en cuanto al impacto ambiental generado. Los resultados obtenidos pretenden servir de referencia a la comunidad científica, aportando datos numéricos que podrán ser comparados en otras tipologías y ámbitos geográficos, a la vez que permitirán analizar y precisar mejoras en cuanto al impacto ambiental generado por los diferentes materiales, subsistemas y elementos constructivos habitualmente utilizados en las tipologías edificatorias definidas

Ozone exchange within and above an irrigated Californian orchard

In this study, the canopy effects on the vertical ozone exchange within and above Californian orchard are investigated. We examined the comprehensive dataset obtained from the Canopy Horizontal Array Turbulence Study (CHATS). CHATS typifies a rural central Californian site, with O3 mixing ratios of less than 60 ppb and moderate NOx mixing ratios. The CHATS campaign covered a complete irrigation cycle, with our analysis including periods before and after irrigation. Lower O3 mixing ratios were found following irrigation, together with increased wind speeds, decreased air temperatures and increased specific humidity. Friction velocity, sensible heat and gas fluxes above the canopy were estimated using variations on the flux-gradient method, including a method which accounts for the roughness sublayer (RSL). These methods were compared to fluxes derived from observed eddy diffusivities of heat and friction velocity. We found that the use of the RSL parameterization, which accounts for the canopy-induced turbulent mixing above the canopy, resulted in a stronger momentum, heat, and ozone exchange fluxes above this orchard, compared to the method which omits the RSL. This was quantified by the increased friction velocity, heat flux and ozone deposition flux of up to 12, 29, and 35% at 2.5 m above the canopy, respectively. Within the canopy, vertical fluxes, as derived from local gradients and eddy diffusivity of heat, were compared to fluxes calculated using the Lagrangian inverse theory. Both methods showed a presence of vertical flux divergence of friction velocity, heat and ozone, suggesting that turbulent mixing was inefficient in homogenizing the effects driven by local sources and sinks on vertical exchange of those quantities. This weak mixing within the canopy was also corroborated in the eddy diffusivities of friction velocity and heat, which were calculated directly from the observations. Finally, the influence of water stress on the O3 budget was examined by comparing the results prior and after the irrigation. Although the analysis is limited to the local conditions, our in situ measurements indicated differences in the O3 mixing ratio prior and after irrigation during CHATS. We attribute these O3 mixing ratio changes to enhanced biological emission of volatile organic compounds (VOCs), driven by water stress

Variable stars in the open cluster NGC 6791 and its surrounding field

Aims: This work presents a high--precision variability survey in the field of the old, super metal-rich open cluster NGC 6791. Methods: The data sample consists of more than 75,000 high-precision CCD time series measurements in the V band obtained mainly at the Canada-France-Hawaii Telescope, with additional data from S. Pedro Martir and Loiano observatories, over a time span of ten nights. The field covers an area of 42x28 arcmin^2. Results: We have discovered 260 new variables and re-determined periods and amplitudes of 70 known variable stars. By means of a photometric evaluation of the membership in NGC 6791, and a preliminary membership based on the proper motions, we give a full description of the variable content of the cluster and surrounding field in the range 16<V<23.5. Accurate periods can be given for the variables with P<4.0 d, while for ones with longer periods the limited time-baseline hampered precise determinations. We categorized the entire sample as follows: 6 pulsating, 3 irregular, 3 cataclysmic, 89 rotational variables and 61 eclipsing systems; moreover, we detected 168 candidate variables for which we cannot give a variability class since their periods are much longer than our time baseline. Conclusions: On the basis of photometric considerations, and of the positions of the stars with respect to the center of the cluster, we inferred that 11 new variable stars are likely members of the cluster, for 22 stars the membership is doubtful and 137 are likely non-members. We also detected an outburst of about 3 mag in the light curve of a very faint blue star belonging to the cluster and we suggest that this star could be a new U Gem (dwarf nova) cataclysmic variable.Comment: 24 pages, 19 Figures, A&A accepte

Fluencia a alta temperatura de compuestos alúmina-circona

Se ha estudiado la microestructura y la respuesta mecánica en compresión a alta temperatura de dos cerámicos de alúmina reforzada con circona (ZTA), fabricados mediante mezcla de polvos y mediante sol-gel con precursores de circona, para determinar la influencia del procesado. Las primeras presentan grandes aglomerados de partículas de circona y mayor tamaño de grano de alúmina, mientras que el material fabricado a partir de precursores presenta una microestructura más homogénea. Se han realizado ensayos en compresión a temperaturas entre 1300 y 1450 °C, tensiones desde 20 a 600 MPa, y velocidad de deformación de 2 x 10'^ s'^, encontrando fractura frágil a T 1400 °C para ambos tipos de microestructura.Microstructure and high temperature compressive creep of tw^o ci cona toughened alumina (ZTA) ceramics, fabricated by pow^der processing and sol-gel precursors processing, has been studied, in order to determine the influence of processing. For the samples fabricated from powders, the microstructure is less homogeneous, with large agglomerates of circona, and greater alumina grain sizes. Compressive tests at temperatures between 1300 °C and 1400 °C, stresses between 20 and 600 MPa, at an strain rate of 2 x 10"^ s"^ have been carried out. Brittle fracture behavior was found for both materials below 1400 °C, and stationary plastic deformation above this temperature

Diet of Risso's dolphin (Grampus griseus) in the western Mediterranean Sea

DIETA DEL DELFÍN DE RISSO (GRAMPUS GRISEUS) EN EL MEDITERRÁNEO OCCIDENTAL. – Se ha analizado el contenido gastrointestinal de quince ejemplares de Grampus griseus varados en el Mediterráneo occidental entre 40º25’N 00º32’W y 37º35’N 00º45’E durante el período 1987 a 2003. Los resultados indican una dieta teutófaga, basada principalmente en cefalópodos oceánicos destacando los octópodos pelágicos, especialmente Argonauta argo, como la presa más abundante (media = 41,28%; SD±34,32). Algunas especies pertenecientes a las familias mmastrephidae, Histioteuthidae y Onychoteuthidae son también componentes frecuentes de la misma. La distribución batimétrica de los cefalópodos indica que el área de alimentación de este delfín se localiza preferentemente sobre el talud continental medio (600-800 m de profundidad).The diet of Risso’s dolphin in the Mediterranean is described based on 15 animals stranded between 40°25’N 00°32’W and 37°35’N 00°45’E from April 1987 to January 2003. The prey were mainly oceanic cephalopods. Pelagic octopods, especially A. argo, were the most abundant (mean = 41.28%; SD±34.32). Species belonging to the families Ommastrephidae, Histioteuthidae and Onychoteuthidae were also frequent components of its diet. The bathymetric distribution of cephalopods shows that Risso’s dolphin preferentially feeds on the middle slope (600 to 800 m depth) in the [email protected] [email protected] [email protected]