Oil-in-water emulsions characterization by laser granulometry and impact on γ-decalactone production in Yarrowia lipolytica

Oil-in-water emulsions composed of methyl ricinoleate (MR) or castor oil (CO) as the organic phase, stabilized by Tween 80, are in the basis of the biotechnological production of gama-decalactone. Y. lipolytica was used due to its ability to grow on hydrophobic substrates and to carry out that biotransformation. The characterization of oil droplets size distribution by laser granulometry was performed under different oil concentrations. The impact of the presence of cells on droplets size was also analyzed, as well as the relevance of washing cells. Furthermore, the granulometric characterization of the emulsions was related with gama-decalactone production for non-washed cells, the smaller droplets disappeared, using both oils, which increased gama-decalactone concentration. This suggests that the access of cells to the substrate occurs by their adhesion around larger oil droplets.The authors acknowledge Fundacao para a Ciencia e Tecnologia (FCT) for the financial support provided (SFRH/BD/28039/2006) and CRUP (Cooperation project F-41/06)

Olive mill wastewater valorization : use by non-conventional yeasts.

peer reviewedThe ability of the strains Yarrowia lipolytica and Candida rugosa to grow on Olive Mill Wastewater (OMW) based medium and to produce high-value compounds from OMW (such as enzymes), while degrading this waste, was tested. Factors affecting cellular growth and OMW degradation were also studied, such as OMW composition, dilution and supplementation. OMW collected from 3-phase olive mill of the north region of Portugal were used and characterized chemical and biochemically. OMW with COD ranging from 100 g·L-1 to 200 g·L-1 were supplemented with yeast extract and ammonium chloride proportionally to its organic composition. Preliminary studies of OMW consumption were carried out in batch cultures of Y. lipolytica W29 and C. rugosa PYCC 3238. The strains were able to grow in the OMW used without dilution, to consume almost all of the sugars present in the media and to significantly reduce COD. Y. lipolytica W29 was less affected by operating conditions changes such as, stirring rate variation and OMW medium supplementation

Impact of the surface properties of lactic bacteria on the stability of emulsions

Bacteria have physicochemical surface properties which depend on the chemical composition of the cell surface. These characters proceed from several type of physicochemical interactions and are involved in attachment processes of microorganisms to surfaces. Thus they are of interest in several areas, as biomedicine, formation of biofilms and adhesion to apolar surfaces. Moreover, food matrix are complex heterogeneous media, which structure settles on interaction forces between molecules (van der Waals, electrostatic or structural forces…). When bacteria are present in a matrix, it is probable that their surface interacts with the other constituents. So far, few studies have mentioned this subject. In order to understand the involvement of cells surface properties in a food matrix, the effect of surface properties of lactic bacteria on the stability of model emulsions were studied. The results showed that the choice of a bacterium according to its surface properties may have a strong impact on the stability and on the behavior of an emulsion

Genetic engineering of the β-oxidation pathway in the yeast Yarrowia lipolytica to increase the production of aroma compounds

peer reviewedThe yeast Yarrowia lipolytica possesses five acyl-CoA oxidases (Aox1p to 5), the enzyme catalysing the first reaction of β-oxidation. The understanding of the specific role of each acyl-CoA oxidase is important to construct a yeast strain growing at a good rate and able to produce without degrading the aroma compound γ-decalactone. In this study we observed that Aox4p exhibits a slight activity on a broad spectrum of substrates and that it is involved in lactone degradation. We constructed a strain lacking this activity. Its growth was only slightly altered and it produced 10 times more lactone than the wild type in 48h. © 2004 Elsevier B.V. All rights reserved

Biotechnological production of γ-decalactone, a peach like aroma, by Yarrowia lipolytica

The request for new flavourings increases every year. Consumer perception that everything natural is better is causing an increase demand for natural aroma additives. Biotechnology has become a way to get natural products. γ-Decalactone is a peach-like aroma widely used in dairy products, beverages and others food industries. In more recent years, more and more studies and industrial processes were endorsed to cost-effect this compound production. One of the best-known methods to produce -decalactone is from ricinoleic acid catalyzed by Yarrowia lipolytica, a generally regarded as safe status yeast. As yet, several factors affecting -decalactone production remain to be fully understood and optimized. In this review, we focus on the aromatic compound -decalactone and its production by Y. lipolytica. The metabolic pathway of lactone production and degradation are addressed. Critical analysis of novel strategies of bioprocess engineering, metabolic and genetic engineering and other strategies for the enhancement of the aroma productivity are presented.This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684)

Interactions between bacterial surfaces and milk proteins, impact on food emulsions stability

Bacteria possess physicochemical surface properties such as hydrophobicity, Lewis acid/base and charge which are involved in physicochemical interactions between cells and interfaces. Moreover, food matrices are complex and heterogeneous media, with a microstructure depending on interactions between the components in media (van der Waals, electrostatic or structural forces, etc.). Despite the presence of bacteria in fermented products, few works have investigated how bacteria interact with other food components. The objective of the present study was to determine the effects of the surface properties of lactic acid bacteria on the stability of model food emulsions. The bacteria were added to oil/water emulsions stabilized by milk proteins (sodium caseinate, whey proteins concentrate or whey proteins isolate) at different pH (from 3 to 7.5). The effect of bacteria on the emulsions stability depended on the surface properties of strains and also on the characteristics of emulsions. Flocculation and aggregation phenomena were observed in emulsion at pHs for which the bacterial surface charge was opposed to the one of the proteins. The effects of bacteria on the stability of emulsion depended also on the concentration of cations present in media such as Ca2+. These results show that the bacteria through their surface properties could interact with other compounds in matrices, consequently affecting the stability of emulsions. The knowledge and choice of bacteria depending on their surface properties could be one of the important factors to control the stability of matrices such as fermentation media or fermented products.Région Bourgogne, Agence Universitaire de la Francophonie

Yarrowia lipolytica growth under increased air pressure: influence on enzymes production

Improvement of microbial cell cultures oxygenation can be achieved by the increase of total air pressure, which increases oxygen solubility in the medium. In this work, a pressurized bioreactor was used for Yarrowia lipolytica batch cultivation under increased air pressure from 1 to 6 bar. Cell growth was strongly enhanced by the pressure rise. Fivefold and 3.4-fold increases in the biomass production and in specific growth rate, respectively, were observed under 6 bar. The increase of oxygen availability caused the induction of the antioxidant enzyme superoxide dismutase, which indicates that the defensive mechanisms of the cells against oxidative stress were effective and cells could cope with increased pressure. The pregrowth of Y. lipolytica under increased pressure conditions did not affect the lipase production ability of the cells. Moreover, the extracellular lipase activity increased 96% using a 5-bar air pressure instead of air at 1- bar pressure during the enzyme production phase. Thus, air pressure increase in bioreactors is an effective mean of cell mass and enzyme productivity enhancement in bioprocess based in Y. lipolytica cultures

Preliminary characterization of residual biomass from Hibiscus sabdariffa Calyces

Hibiscus sabdariffa calyces are mainly used for different agro-food and beverages applications. The residual biomass generated contains various useful substances that were extracted and characterized. It contained 23% (w/w) soluble pectic material, a food additive, extracted with hot acidified water (80°C, pH = 1.5) and precipitated with ethanol. The molecular weight (28.5 and 109.7 kDa), the degree of methylation (70.6 and 44.3%) and the degree of acetylation (19.0 and 4.9%) were determined for two Senegalese cultivars (koor and vimto, respectively). The effect of the extraction method on these parameters was highlighted. The residual lignocellulosic material (LCM) was chemically degraded to monosaccharides and the amount of glucose and xylose (39% of dry LCM) determined to estimate its potential as feedstock for biofuels production. However, an enzymatic degradation test revealed a recalcitrant LCM, as only 50 to 55% of its polymeric glucose content was degraded to monosaccharides without pretreatment. Xylo-oligosaccharides (XOS) are functional foods with a real market potential as prebiotics, characterized by their degree of polymerization (DP). The production of XOS synthetized by the enzymatic degradation of LCM was monitored. The results of analyses performed showed that XOS produced had mainly DP3 and DP4 values.Key words: Pectin, lignocellulosic material, enzymatic degradation, xylo-oligosaccharides

Alternativas para el Control Multivariable

This paper presents multiple alternatives for multivariable control in two industrial processes: Distillation Column and Evaporator. The design of four control strategies is presented, that includes a multiloop control, a decoupling multivariable control, both with Proportional Integral structure, a decoupling control through Inverse Nyquist Array, an Internal Model Control and a predictive control. Simulations results are obtained using Matlab, and show the potentialities of each one of those strategies to handle references changes and disturbances. The advantages of predictive control in regulation of multivariable processes are evident.En este trabajo se presentan múltiples alternativas  para el control multivariable de dos procesos industriales: Columna de Destilación y Evaporador. Se diseñan cuatro estrategias de control: un control multilazo, control multivariable con desacopladores, ambas con estructura Proporcional Integral, un control con desacopladores mediante del Arreglo Inverso de Nyquist, un control por Modelo Interno y control Predictivo. Los resultados de simulación son obtenidos mediante el Matlab y muestran las potencialidades de cada una de estas estrategias ante cambios en la referencia y disturbios. Las ventajas del control predictivo en la regulación  de procesos multivariable son evidentes

Enrichment of anhydrous milk fat in polyunsatured fatty acid residues from linseed and rapeseed oil through enzymatic interesterification

The interesterification, or ester exchange, between two fats leads to the rearrangement of acyl moieties in both. The use of a sn-1,3-specific lipase confines the exchange of fatty acid residues to the sn-1 and sn-3 positions of triacylglycerides (TAG), generating products with characteristics that cannot be obtained through a chemical process or a blending. Such reactions require mild conditions with no solvent needed and they yield no unhealthful trans fatty acids, justifying the stepped-up interest of enzymatic interesterification for the production of margarines and other food fats. The aim of this work was to use enzymatic interesterification to enrich anhydrous milk fat (AMF) with unsaturated fatty acid C18 residues from linseed oil (LO) and eventually from rapeseed oil (RO) through some binary blends and one ternary blend. For that, the 1,3-specific lipase from Thermomyces lanuginosa (Lipozyme TL IM) was used in solvent-free batch and micro-aqueous reactions and fat blends with different mass ratios were tested. The evolution of TAG profiles, of interesterification degre (ID) and of free fatty acids (FFA), was followed along the reactions. Determination of dropping points (DP) and solid fat contents (SFC) enabled a rheological characterization of the products. The end products were also characterized for their oxidative stability and their textural properties