A PCP Pincer Ligand for Coordination Polymers with Versatile Chemical Reactivity: Selective Activation of CO2 Gas over CO Gas in the Solid State

A tetra(carboxylated) PCP pincer ligand has been synthesized as a building block for porous coordination polymers (PCPs). The air- and moisture-stable PCP metalloligands are rigid tetratopic linkers that are geometrically akin to ligands used in the synthesis of robust metal-organic frameworks (MOFs). Here, the design principle is demonstrated by cyclometalation with Pd(II) Cl and subsequent use of the metalloligand to prepare a crystalline 3D MOF by direct reaction with Co(II) ions and structural resolution by single crystal X-ray diffraction. The Pd-Cl groups inside the pores are accessible to post-synthetic modifications that facilitate chemical reactions previously unobserved in MOFs: a Pd-CH3 activated material undergoes rapid insertion of CO2 gas to give Pd-OC(O)CH3 at 1 atm and 298 K. However, since the material is highly selective for the adsorption of CO2 over CO, a Pd-N3 modified version resists CO insertion under the same conditions

Effects of zinc and fluoride on the remineralisation of artificial carious lesions under simulated plaque fluid conditions.

The aim was to study the effects of zinc (Zn) and fluoride (F) on remineralisation at plaque fluid concentrations. Artificial carious lesions were created in 2 acid-gel demineralising systems (initially infinitely undersaturated and partially saturated with respect to enamel) giving lesions with different mineral distribution characteristics (high and low R values, respectively) but similar integrated mineral loss values. Lesions of both types were assigned to 1 of 4 groups and remineralised for 5 days at 37°C. Zn and F were added, based on plaque fluid concentrations 1 h after application, to give 4 treatments: 231 μmol/l Zn, 10.5 μmol/l F, Zn/F combined and an unmodified control solution (non-F/non-Zn). Subsequently remineralisation was measured using microradiography. High-R lesions were analysed for calcium, phosphorus, F and Zn using electron probe micro-analysis. All lesions underwent statistically significant remineralisation. For low-R lesions, remineralisation was in the order F(a) < non-F/non-Zn(a) < Zn(a, b) < Zn/F(b), and for high-R lesions F(a) < non-F/non-Zn(b) < Zn(b) < Zn/F(c) (treatments with the same superscript letter not significantly different, at p < 0.05). Qualitatively, remineralisation occurred throughout non-F/non-Zn and Zn groups, predominantly at the surface zone (F) and within the lesion body (Zn/F). Electron probe micro-analysis revealed Zn in relatively large amounts in the outer regions (Zn, Zn/F). F was abundant not only at the surface (F), but also in the lesion body (Zn/F). Calcium:phosphate ratios were similar to hydroxyapatite (all). To conclude, under static remineralising conditions simulating plaque fluid, Zn/F treatment gave significantly greater remineralisation than did F treatment, possibly because Zn in the Zn/F group maintained greater surface zone porosity compared with F, facilitating greater lesion body remineralisation

A Stochastic Approach to Shortcut Bridging in Programmable Matter

In a self-organizing particle system, an abstraction of programmable matter, simple computational elements called particles with limited memory and communication self-organize to solve system-wide problems of movement, coordination, and configuration. In this paper, we consider a stochastic, distributed, local, asynchronous algorithm for "shortcut bridging", in which particles self-assemble bridges over gaps that simultaneously balance minimizing the length and cost of the bridge. Army ants of the genus Eciton have been observed exhibiting a similar behavior in their foraging trails, dynamically adjusting their bridges to satisfy an efficiency trade-off using local interactions. Using techniques from Markov chain analysis, we rigorously analyze our algorithm, show it achieves a near-optimal balance between the competing factors of path length and bridge cost, and prove that it exhibits a dependence on the angle of the gap being "shortcut" similar to that of the ant bridges. We also present simulation results that qualitatively compare our algorithm with the army ant bridging behavior. Our work gives a plausible explanation of how convergence to globally optimal configurations can be achieved via local interactions by simple organisms (e.g., ants) with some limited computational power and access to random bits. The proposed algorithm also demonstrates the robustness of the stochastic approach to algorithms for programmable matter, as it is a surprisingly simple extension of our previous stochastic algorithm for compression.Comment: Published in Proc. of DNA23: DNA Computing and Molecular Programming - 23rd International Conference, 2017. An updated journal version will appear in the DNA23 Special Issue of Natural Computin

Estimation of Dietary Iron Bioavailability from Food Iron Intake and Iron Status

Currently there are no satisfactory methods for estimating dietary iron absorption (bioavailability) at a population level, but this is essential for deriving dietary reference values using the factorial approach. The aim of this work was to develop a novel approach for estimating dietary iron absorption using a population sample from a sub-section of the UK National Diet and Nutrition Survey (NDNS). Data were analyzed in 873 subjects from the 2000–2001 adult cohort of the NDNS, for whom both dietary intake data and hematological measures (hemoglobin and serum ferritin (SF) concentrations) were available. There were 495 men aged 19–64 y (mean age 42.7±12.1 y) and 378 pre-menopausal women (mean age 35.7±8.2 y). Individual dietary iron requirements were estimated using the Institute of Medicine calculations. A full probability approach was then applied to estimate the prevalence of dietary intakes that were insufficient to meet the needs of the men and women separately, based on their estimated daily iron intake and a series of absorption values ranging from 1–40%. The prevalence of SF concentrations below selected cut-off values (indicating that absorption was not high enough to maintain iron stores) was derived from individual SF concentrations. An estimate of dietary iron absorption required to maintain specified SF values was then calculated by matching the observed prevalence of insufficiency with the prevalence predicted for the series of absorption estimates. Mean daily dietary iron intakes were 13.5 mg for men and 9.8 mg for women. Mean calculated dietary absorption was 8% in men (50th percentile for SF 85 µg/L) and 17% in women (50th percentile for SF 38 µg/L). At a ferritin level of 45 µg/L estimated absorption was similar in men (14%) and women (13%). This new method can be used to calculate dietary iron absorption at a population level using data describing total iron intake and SF concentration

Assessment of sub-Nyquist deterministic and random data sampling techniques for operational modal analysis

This paper assesses numerically the potential of two different spectral estimation approaches supporting non-uniform in time data sampling at sub-Nyquist average rates (i.e., below the Nyquist frequency) to reduce data transmission payloads in wireless sensor networks (WSNs) for operational modal analysis (OMA) of civil engineering structures. This consideration relaxes transmission bandwidth constraints in WSNs and prolongs sensor battery life since wireless transmission is the most energy-hungry on-sensor operation. Both the approaches assume acquisition of sub-Nyquist structural response acceleration measurements and transmission to a base station without on-sensor processing. The response acceleration power spectral density matrix is estimated directly from the sub-Nyquist measurements and structural mode shapes are extracted using the frequency domain decomposition algorithm. The first approach relies on the compressive sensing (CS) theory to treat sub-Nyquist randomly sampled data assuming that the acceleration signals are sparse/compressible in the frequency domain (i.e., have a small number of Fourier coefficients with significant magnitude). The second approach is based on a power spectrum blind sampling (PSBS) technique considering periodic deterministic sub-Nyquist “multi-coset” sampling and treating the acceleration signals as wide-sense stationary stochastic processes without posing any sparsity conditions. The modal assurance criterion (MAC) is adopted to quantify the quality of mode shapes derived by the two approaches at different sub-Nyquist compression rates (CRs) using computer-generated signals of different sparsity and field-recorded stationary data pertaining to an overpass in Zurich, Switzerland. It is shown that for a given CR, the performance of the CS-based approach is detrimentally affected by signal sparsity, while the PSBS-based approach achieves MAC>0.96 independently of signal sparsity for CRs as low as 11% the Nyquist rate. It is concluded that the PSBS-based approach reduces effectively data transmission requirements in WSNs for OMA, without being limited by signal sparsity and without requiring a priori assumptions or knowledge of signal sparsity

Predictive modelling of Ross River virus notifications in southeastern Australia.

Ross River virus (RRV) is a mosquito-borne virus endemic to Australia. The disease, marked by arthritis, myalgia and rash, has a complex epidemiology involving several mosquito species and wildlife reservoirs. Outbreak years coincide with climatic conditions conducive to mosquito population growth. We developed regression models for human RRV notifications in the Mildura Local Government Area, Victoria, Australia with the objective of increasing understanding of the relationships in this complex system, providing trigger points for intervention and developing a forecast model. Surveillance, climatic, environmental and entomological data for the period July 2000-June 2011 were used for model training then forecasts were validated for July 2011-June 2015. Rainfall and vapour pressure were the key factors for forecasting RRV notifications. Validation of models showed they predicted RRV counts with an accuracy of 81%. Two major RRV mosquito vectors (Culex annulirostris and Aedes camptorhynchus) were important in the final estimation model at proximal lags. The findings of this analysis advance understanding of the drivers of RRV in temperate climatic zones and the models will inform public health agencies of periods of increased risk

Transient peak-strain matching partially recovers the age-impaired mechanoadaptive cortical bone response

Mechanoadaptation maintains bone mass and architecture; its failure underlies age-related decline in bone strength. It is unclear whether this is due to failure of osteocytes to sense strain, osteoblasts to form bone or insufficient mechanical stimulus. Mechanoadaptation can be restored to aged bone by surgical neurectomy, suggesting that changes in loading history can rescue mechanoadaptation. We use non-biased, whole-bone tibial analyses, along with characterisation of surface strains and ensuing mechanoadaptive responses in mice at a range of ages, to explore whether sufficient load magnitude can activate mechanoadaptation in aged bone. We find that younger mice adapt when imposed strains are lower than in mature and aged bone. Intriguingly, imposition of short-term, high magnitude loading effectively primes cortical but not trabecular bone of aged mice to respond. This response was regionally-matched to highest strains measured by digital image correlation and to osteocytic mechanoactivation. These data indicate that aged bone’s loading response can be partially recovered, non-invasively by transient, focal high strain regions. Our results indicate that old murine bone does respond to load when the loading is of sufficient magnitude, and bones’ age-related adaptation failure may be due to insufficient mechanical stimulus to trigger mechanoadaptation

Connective tissue disease related interstitial lung diseases and idiopathic pulmonary fibrosis: provisional core sets of domains and instruments for use in clinical trials

Rationale Clinical trial design in interstitial lung diseases (ILDs) has been hampered by lack of consensus on appropriate outcome measures for reliably assessing treatment response. In the setting of connective tissue diseases (CTDs), some measures of ILD disease activity and severity may be confounded by non-pulmonary comorbidities. Methods The Connective Tissue Disease associated Interstitial Lung Disease (CTD-ILD) working group of Outcome Measures in Rheumatology—a non-profit international organisation dedicated to consensus methodology in identification of outcome measures—conducted a series of investigations which included a Delphi process including >248 ILD medical experts as well as patient focus groups culminating in a nominal group panel of ILD experts and patients. The goal was to define and develop a consensus on the status of outcome measure candidates for use in randomised controlled trials in CTD-ILD and idiopathic pulmonary fibrosis (IPF). Results A core set comprising specific measures in the domains of lung physiology, lung imaging, survival, dyspnoea, cough and health-related quality of life is proposed as appropriate for consideration for use in a hypothetical 1-year multicentre clinical trial for either CTD-ILD or IPF. As many widely used instruments were found to lack full validation, an agenda for future research is proposed. Conclusion Identification of consensus preliminary domains and instruments to measure them was attained and is a major advance anticipated to facilitate multicentre RCTs in the field

Formation of regulatory modules by local sequence duplication

Turnover of regulatory sequence and function is an important part of molecular evolution. But what are the modes of sequence evolution leading to rapid formation and loss of regulatory sites? Here, we show that a large fraction of neighboring transcription factor binding sites in the fly genome have formed from a common sequence origin by local duplications. This mode of evolution is found to produce regulatory information: duplications can seed new sites in the neighborhood of existing sites. Duplicate seeds evolve subsequently by point mutations, often towards binding a different factor than their ancestral neighbor sites. These results are based on a statistical analysis of 346 cis-regulatory modules in the Drosophila melanogaster genome, and a comparison set of intergenic regulatory sequence in Saccharomyces cerevisiae. In fly regulatory modules, pairs of binding sites show significantly enhanced sequence similarity up to distances of about 50 bp. We analyze these data in terms of an evolutionary model with two distinct modes of site formation: (i) evolution from independent sequence origin and (ii) divergent evolution following duplication of a common ancestor sequence. Our results suggest that pervasive formation of binding sites by local sequence duplications distinguishes the complex regulatory architecture of higher eukaryotes from the simpler architecture of unicellular organisms

Mitochondrial DNA Copy Number Is Associated with Breast Cancer Risk

Mitochondrial DNA (mtDNA) copy number in peripheral blood is associated with increased risk of several cancers. However, data from prospective studies on mtDNA copy number and breast cancer risk are lacking. We evaluated the association between mtDNA copy number in peripheral blood and breast cancer risk in a nested case-control study of 183 breast cancer cases with pre-diagnostic blood samples and 529 individually matched controls among participants of the Singapore Chinese Health Study. The mtDNA copy number was measured using real time PCR. Conditional logistic regression analyses showed that there was an overall positive association between mtDNA copy number and breast cancer risk (Ptrend = 0.01). The elevated risk for higher mtDNA copy numbers was primarily seen for women with <3 years between blood draw and cancer diagnosis; ORs (95% CIs) for 2nd, 3rd, 4th, and 5th quintile of mtDNA copy number were 1.52 (0.61, 3.82), 2.52 (1.03, 6.12), 3.12 (1.31, 7.43), and 3.06 (1.25, 7.47), respectively, compared with the 1st quintile (Ptrend = 0.004). There was no association between mtDNA copy number and breast cancer risk among women who donated a blood sample ≥3 years before breast cancer diagnosis (Ptrend = 0.41). This study supports a prospective association between increased mtDNA copy number and breast cancer risk that is dependent on the time interval between blood collection and breast cancer diagnosis. Future studies are warranted to confirm these findings and to elucidate the biological role of mtDNA copy number in breast cancer risk. © 2013 Thyagarajan et al