2,122 research outputs found
Strength Tests of Thin-walled Duralumin Cylinders of Elliptic Section
This report is the fifth of a series presenting the results of strength tests of thin-walled cylinders and truncated cones of circular and elliptic section; it includes the results obtained from torsion tests on 30 cylinders, pure bending tests on 30 cylinders, and combined transverse shear and bending tests on 60 cylinders. All the cylinders tested were elliptic section with the ends clamped to rigid bulkheads. In the pure bending and combined transverse shear and bending tests the loads were applied in the plane of the major axis. The results of the tests on elliptic cylinders are correlated with the results of corresponding tests on circular cylinders and are presented in charts suitable for use in design
General equations for the stress analysis of rings
In this report it is shown that the shear, axial force, and moment at one point in a simple ring subjected to any loading condition can be given by three independent equations involving certain integrals that must be evaluated regardless of the method of analysis used. It is also shown how symmetry of the ring alone or of the ring and the loading about 1 or 2 axes makes it possible to simplify the three equations and greatly reduces the number of integrals that must be evaluated. Application of the general equations presented in this report to practical problems in the stress analysis of rings makes it possible to shorten, simplify, and systematize the calculations for both simple and braced rings. Three illustrative problems are included to demonstrate the application of the general equations to a simple ring with different loadings
Sparse Encoding of Binocular Images for Depth Inference
Sparse coding models have been widely used to decompose monocular images into linear combinations of small numbers of basis vectors drawn from an overcomplete set. However, little work has examined sparse coding in the context of stereopsis. In this paper, we demonstrate that sparse coding facilitates better depth inference with sparse activations than comparable feed-forward networks of the same size. This is likely due to the noise and redundancy of feed-forward activations, whereas sparse coding utilizes lateral competition to selectively encode image features within a narrow band of depths
Species composition and turnover models provide robust approximations of biodiversity in marine conservation planning
The Challenges Associated With Connectivity in Ecosystem Processes
Developing a framework to quantify the transformation, sequestration or connectivity of energy and matter across habitats is one of the most significant challenges faced by ecologists and resource managers today. However, there are significant challenges associated with quantifying the ecosystem processes that connect and interact across habitats. These processes include the movement of nutrients and energy and can have substantial effects on the structure and dynamics of adjacent habitats and ecosystem functioning. Here, we use a connectivity framework developed for populations to inform our understanding of the challenges associated with connectivity in ecosystem processes, and how specific habitats can contribute to overall ecosystem functioning. The landscape patterns and potential connections between habitats in terms of material storage or transformation have important implications for understanding how fragmentation and degradation of habitats in ecosystems will influence broad-scale ecosystem function
Recommended from our members
An improved WRF for urban-scale and complex-terrain applications
Simulations of atmospheric flow through urban areas must account for a wide range of physical phenomena including both mesoscale and urban processes. Numerical weather prediction models, such as the Weather and Research Forecasting model (WRF), excel at predicting synoptic and mesoscale phenomena. With grid spacings of less than 1 km (as is required for complex heterogeneous urban areas), however, the limits of WRF's terrain capabilities and subfilter scale (SFS) turbulence parameterizations are exposed. Observations of turbulence in urban areas frequently illustrate a local imbalance of turbulent kinetic energy (TKE), which cannot be captured by current turbulence models. Furthermore, WRF's terrain-following coordinate system is inappropriate for high-resolution simulations that include buildings. To address these issues, we are implementing significant modifications to the ARW core of the Weather Research and Forecasting model. First, we are implementing an improved turbulence model, the Dynamic Reconstruction Model (DRM), following Chow et al. (2005). Second, we are modifying WRF's terrain-following coordinate system by implementing an immersed boundary method (IBM) approach to account for the effects of urban geometries and complex terrain. Companion papers detailing the improvements enabled by the DRM and the IBM approaches are also presented (by Mirocha et al., paper 13.1, and K.A. Lundquist et al., paper 11.1, respectively). This overview of the LLNL-UC Berkeley collaboration presents the motivation for this work and some highlights of our progress to date. After implementing both DRM and an IBM for buildings in WRF, we will be able to seamlessly integrate mesoscale synoptic boundary conditions with building-scale urban simulations using grid nesting and lateral boundary forcing. This multi-scale integration will enable high-resolution simulations of flow and dispersion in complex geometries such as urban areas, as well as new simulation capabilities in regions of complex terrain
Oblique Shocks As The Origin Of Radio To Gamma-ray Variability In AGN
The `shock in jet' model for cm-waveband blazar variability is revisited,
allowing for arbitrary shock orientation with respect to the jet flow
direction, and both random and ordered magnetic field. It is shown that oblique
shocks can explain events with swings in polarization position angle much less
than the 90 deg. associated with transverse structures, while retaining the
general characteristics of outbursts, including spectral behavior and level of
peak percentage polarization. Models dominated by a force-free, minimum energy
magnetic field configuration (essentially helical) display a shallow rise in
percentage polarization and frequency dependent swing in polarization position
angle not in agreement with the results of single-dish monitoring observations,
implying that the field is predominantly random in the quiescent state.
Outbursts well-explained by the `shock in jet' model are present during
gamma-ray flaring in several sources, supporting the idea that shock events are
responsible for activity from the radio to gamma-ray bands.Comment: 19 pages, 8 figures, accepted for publication in Ap
Recommended from our members
Simulating atmosphere flow for wind energy applications with WRF-LES
Forecasts of available wind energy resources at high spatial resolution enable users to site wind turbines in optimal locations, to forecast available resources for integration into power grids, to schedule maintenance on wind energy facilities, and to define design criteria for next-generation turbines. This array of research needs implies that an appropriate forecasting tool must be able to account for mesoscale processes like frontal passages, surface-atmosphere interactions inducing local-scale circulations, and the microscale effects of atmospheric stability such as breaking Kelvin-Helmholtz billows. This range of scales and processes demands a mesoscale model with large-eddy simulation (LES) capabilities which can also account for varying atmospheric stability. Numerical weather prediction models, such as the Weather and Research Forecasting model (WRF), excel at predicting synoptic and mesoscale phenomena. With grid spacings of less than 1 km (as is often required for wind energy applications), however, the limits of WRF's subfilter scale (SFS) turbulence parameterizations are exposed, and fundamental problems arise, associated with modeling the scales of motion between those which LES can represent and those for which large-scale PBL parameterizations apply. To address these issues, we have implemented significant modifications to the ARW core of the Weather Research and Forecasting model, including the Nonlinear Backscatter model with Anisotropy (NBA) SFS model following Kosovic (1997) and an explicit filtering and reconstruction technique to compute the Resolvable Subfilter-Scale (RSFS) stresses (following Chow et al, 2005).We are also modifying WRF's terrain-following coordinate system by implementing an immersed boundary method (IBM) approach to account for the effects of complex terrain. Companion papers presenting idealized simulations with NBA-RSFS-WRF (Mirocha et al.) and IBM-WRF (K. A. Lundquist et al.) are also presented. Observations of flow through the Altamont Pass (Northern California) wind farm are available for validation of the WRF modeling tool for wind energy applications. In this presentation, we use these data to evaluate simulations using the NBA-RSFS-WRF tool in multiple configurations. We vary nesting capabilities, multiple levels of RSFS reconstruction, SFS turbulence models (the new NBA turbulence model versus existing WRF SFS turbulence models) to illustrate the capabilities of the modeling tool and to prioritize recommendations for operational uses. Nested simulations which capture both significant mesoscale processes as well as local-scale stable boundary layer effects are required to effectively predict available wind resources at turbine height
Determining the Magnetic Field Orientation of Coronal Mass Ejections from Faraday Rotation
We describe a method to measure the magnetic field orientation of coronal
mass ejections (CMEs) using Faraday rotation (FR). Two basic FR profiles,
Gaussian-shaped with a single polarity or "N"-like with polarity reversals, are
produced by a radio source occulted by a moving flux rope depending on its
orientation. These curves are consistent with the Helios observations,
providing evidence for the flux-rope geometry of CMEs. Many background radio
sources can map CMEs in FR onto the sky. We demonstrate with a simple flux rope
that the magnetic field orientation and helicity of the flux rope can be
determined 2-3 days before it reaches Earth, which is of crucial importance for
space weather forecasting. An FR calculation based on global
magnetohydrodynamic (MHD) simulations of CMEs in a background heliosphere shows
that FR mapping can also resolve a CME geometry curved back to the Sun. We
discuss implementation of the method using data from the Mileura Widefield
Array (MWA).Comment: 22 pages with 9 figures, accepted for publication in Astrophys.
- …