35 research outputs found

    Universal scaling behaviour of surface tension of molecular chains

    Get PDF
    We use and extend the universal relationship recently proposed by Galliero [G. Galliero, J. Chem. Phys. 133, 074705 (2010)], based on a combination of the corresponding-states principle of Guggenheim [E. A. Guggenheim, J. Chem. Phys. 13, 253 (1945)] and the parachor approach of Macleod [J. Macleod, Trans. Faraday Soc. 19, 38 (1923)], to predict the vapour-liquid surface tension of fully flexible chainlike Lennard-Jones molecules. In the original study of Galliero, the reduced surface tension of short-chain molecules formed by up to five monomers is expressed as a unique function of the difference between the liquid and vapour coexistence densities. In this work, we extend the applicability of the recipe and demonstrate that it is also valid for predicting the surface tension of two different chainlike molecular models, namely, linear tangent chains that interact through the Lennard-Jones intermolecular potential and fully flexible chains formed by spherical segments inter- acting through the square-well potential. Computer simulation data for vapour-liquid surface tension of fully flexible and rigid linear Lennard-Jones, and fluid flexible square-well chains is taken from our previous works. Our results indicate that the universal scaling relationship is able to correlate short- and long-chain molecules with different degrees of flexibility and interacting through different inter- molecular potentials.The authors would like to acknowledge helpful discus- sions with B. Mendiboure, D. Bessières, F. Plantier, M. M. Piñeiro, and J. M. Míguez. This work was supported by Ministerio de Ciencia e Innovación (MICINN, Spain) through Grants Nos. FIS2010-14866 and FIS2010-22047-C05-05. Further financial support from Proyecto de Excelencia from Junta de Andalucía (Grant No. P07-FQM02884), Comunidad Autónoma de Madrid (Grant No. MODELICO-P2009EPS-1691), and Universidad de Huelva are also acknowledged

    Vapor-liquid interfacial properties of rigid-linear Lennard-Jones chains

    Get PDF
    We have obtained the interfacial properties of short rigid-linear chains formed from tangentially bonded Lennard-Jones monomeric units from direct simulation of the vapour-liquid interface. The full long-range tails of the potential are accounted for by means of an improved version of the inhomogeneous long-range corrections of Janecek [J. Phys. Chem. B 110, 6264–6269 (2006)] proposed recently by MacDowell and Blas [J. Chem. Phys. 131, 074705 (2009)] valid for spherical as well as for rigid and flexible molecular systems. Three different model systems comprising of 3, 4, and 5 monomers per molecule are considered. The simulations are performed in the canonical ensemble, and the vapor-liquid interfacial tension is evaluated using the test-area method. In addition to the sur- face tension, we also obtain density profiles, coexistence densities, critical temperature and density, and interfacial thickness as functions of temperature, paying particular attention to the effect of the chain length and rigidity on these properties. According to our results, the main effect of increasing the chain length (at fixed temperature) is to sharpen the vapor-liquid interface and to increase the width of the biphasic coexistence region. As a result, the interfacial thickness decreases and the sur- face tension increases as the molecular chains get longer. The surface tension has been scaled by critical properties and represented as a function of the difference between coexistence densities relative to the critical density.The authors would like to acknowledge helpful discus- sions with F. J. Martínez-Ruiz, E. de Miguel, C. Vega, and A. Galindo. This work was supported by Ministerio de Ciencia e Innovación (MICINN, Spain) through Grant Nos. FIS2010- 14866 (F.J.B.), FIS2009-07923 (J.M.M. and M.M.P.) and FIS2010-22047-C05-05 (L.G.M.D.). J.M.M. also acknowledges Ministerio de Ciencia e Innovación for the FPU Grant with reference AP2007-02172. Further financial support from Proyecto de Excelencia from Junta de Andalucía (Grant No. P07-FQM02884), Consellería de Educacion e Ordenacion Universitaria (Xunta de Galicia), Comunidad Autónoma de Madrid (Grant No. MODELICO-P2009/EPS-1691), and Universidad de Huelva are also acknowledged

    Vapour–liquid interfacial properties of square-well chains from density functional theory and Monte Carlo simulation

    Get PDF
    The statistical associating fluid theory for attractive potentials of variable range (SAFT-VR) density functional theory (DFT) developed by [Gloor et al., J. Chem. Phys., 2004, 121, 12740–12759] is used to predict the interfacial behaviour of molecules modelled as fully-flexible square-well chains formed from tangentially-bonded monomers of diameter s and potential range l = 1.5s. Four different model systems, comprising 4, 8, 12, and 16 monomers per molecule, are considered. In addition to that, we also compute a number of interfacial properties of molecular chains from direct simulation of the vapour–liquid interface. The simulations are performed in the canonical ensemble, and the vapour– liquid interfacial tension is evaluated using the wandering interface (WIM) method, a technique based on the thermodynamic definition of surface tension. Apart from surface tension, we also obtain density profiles, coexistence densities, vapour pressures, and critical temperature and density, paying particular attention to the effect of the chain length on these properties. According to our results, the main effect of increasing the chain length (at fixed temperature) is to sharpen the vapour–liquid interface and to increase the width of the biphasic coexistence region. As a result, the interfacial thickness decreases and the surface tension increases as the molecular chains get longer. The interfacial thickness and surface tension appear to exhibit an asymptotic limiting behaviour for long chains. A similar behaviour is also observed for the coexistence densities and critical properties. Agreement between theory and simulation results indicates that SAFT-VR DFT is only able to predict qualitatively the interfacial properties of the model. Our results are also compared with simulation data taken from the literature, including the vapour–liquid coexistence densities, vapour pressures, and surface tension.Francisco José Martínez-Ruiz, Felipe J. Blas and A.Ignacio Moreno-Ventas Bravo acknowledge Ministerio de Economía y Competitividad of Spain for financial support from project FIS2013-49620-C2-1-P, co financed with EU Feder funds. We also acknowledge financial support from project number FIS2015-71749-REDT ‘‘Red de Simulación Molecular’’, Acciones de Dinamización Redes de Excelencia del Ministerio de Economía y Competitividad. Additional support from Universidad de Huelva and Junta de Andalucía is also acknowledged

    Pancreatic metastases from renal cell carcinoma. Postoperative outcome after surgical treatment in a Spanish multicenter study (PANMEKID)

    Get PDF
    Background: Renal Cell Carcinoma (RCC) occasionally spreads to the pancreas. The purpose of our study is to evaluate the short and long-term results of a multicenter series in order to determine the effect of surgical treatment on the prognosis of these patients. Methods: Multicenter retrospective study of patients undergoing surgery for RCC pancreatic metastases, from January 2010 to May 2020. Variables related to the primary tumor, demographics, clinical characteristics of metastasis, location in the pancreas, type of pancreatic resection performed and data on short and long-term evolution after pancreatic resection were collected. Results: The study included 116 patients. The mean time between nephrectomy and pancreatic metastases' resection was 87.35 months (ICR: 1.51-332.55). Distal pancreatectomy was the most performed technique employed (50 %). Postoperative morbidity was observed in 60.9 % of cases (Clavien-Dindo greater than IIIa in 14 %). The median follow-up time was 43 months (13-78). Overall survival (OS) rates at 1, 3, and 5 years were 96 %, 88 %, and 83 %, respectively. The disease-free survival (DFS) rate at 1, 3, and 5 years was 73 %, 49 %, and 35 %, respectively. Significant prognostic factors of relapse were a disease free interval of less than 10 years (2.05 [1.13-3.72], p 0.02) and a history of previous extrapancreatic metastasis (2.44 [1.22-4.86], p 0.01). Conclusions: Pancreatic resection if metastatic RCC is found in the pancreas is warranted to achieve higher overall survival and disease-free survival, even if extrapancreatic metastases were previously removed. The existence of intrapancreatic multifocal compromise does not always warrant the performance of a total pancreatectomy in order to improve survival. (C) 2021 The Authors. Published by Elsevier Ltd

    Repeated pancreatic resection for pancreatic metastases from renal cell Carcinoma: A Spanish multicenter study (PANMEKID)

    Full text link
    Background and objectives: Recurrent isolated pancreatic metastasis from Renal Cell Carcinoma (RCC) after pancreatic resection is rare. The purpose of our study is to describe a series of cases of relapse of pancreatic metastasis from renal cancer in the pancreatic remnant and its surgical treatment with a repeated pancreatic resection, and to analyse the results of both overall and disease -free survival. Methods: Multicenter retrospective study of patients undergoing pancreatic resection for RCC pancreatic metastases, from January 2010 to May 2020. Patients were grouped into two groups depending on whether they received a single pancreatic resection (SPS) or iterative pancreatic resection. Data on short and long-term outcome after pancreatic resection were collected. Results: The study included 131 pancreatic resections performed in 116 patients. Thus, iterative pancreatic surgery (IPS) was performed in 15 patients. The mean length of time between the first pancreatic surgery and the second was 48.9 months (95 % CI: 22.2-56.9). There were no differences in the rate of postoperative complications. The DFS rates at 1, 3 and 5 years were 86 %, 78 % and 78 % vs 75 %, 50 % and 37 % in the IPS and SPS group respectively (p = 0.179). OS rates at 1, 3, 5 and 7 years were 100 %, 100 %, 100 % and 75 % in the IPS group vs 95 %, 85 %, 80 % and 68 % in the SPS group (p = 0.895). Conclusion: Repeated pancreatic resection in case of relapse of pancreatic metastasis of RCC in the pancreatic remnant is justified, since it achieves OS results similar to those obtained after the first resection

    Healthcare workers hospitalized due to COVID-19 have no higher risk of death than general population. Data from the Spanish SEMI-COVID-19 Registry

    Get PDF
    Aim To determine whether healthcare workers (HCW) hospitalized in Spain due to COVID-19 have a worse prognosis than non-healthcare workers (NHCW). Methods Observational cohort study based on the SEMI-COVID-19 Registry, a nationwide registry that collects sociodemographic, clinical, laboratory, and treatment data on patients hospitalised with COVID-19 in Spain. Patients aged 20-65 years were selected. A multivariate logistic regression model was performed to identify factors associated with mortality. Results As of 22 May 2020, 4393 patients were included, of whom 419 (9.5%) were HCW. Median (interquartile range) age of HCW was 52 (15) years and 62.4% were women. Prevalence of comorbidities and severe radiological findings upon admission were less frequent in HCW. There were no difference in need of respiratory support and admission to intensive care unit, but occurrence of sepsis and in-hospital mortality was lower in HCW (1.7% vs. 3.9%; p = 0.024 and 0.7% vs. 4.8%; p<0.001 respectively). Age, male sex and comorbidity, were independently associated with higher in-hospital mortality and healthcare working with lower mortality (OR 0.211, 95%CI 0.067-0.667, p = 0.008). 30-days survival was higher in HCW (0.968 vs. 0.851 p<0.001). Conclusions Hospitalized COVID-19 HCW had fewer comorbidities and a better prognosis than NHCW. Our results suggest that professional exposure to COVID-19 in HCW does not carry more clinical severity nor mortality

    Guidelines for the use and interpretation of assays for monitoring autophagy (4th edition)1.

    Get PDF
    In 2008, we published the first set of guidelines for standardizing research in autophagy. Since then, this topic has received increasing attention, and many scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Thus, it is important to formulate on a regular basis updated guidelines for monitoring autophagy in different organisms. Despite numerous reviews, there continues to be confusion regarding acceptable methods to evaluate autophagy, especially in multicellular eukaryotes. Here, we present a set of guidelines for investigators to select and interpret methods to examine autophagy and related processes, and for reviewers to provide realistic and reasonable critiques of reports that are focused on these processes. These guidelines are not meant to be a dogmatic set of rules, because the appropriateness of any assay largely depends on the question being asked and the system being used. Moreover, no individual assay is perfect for every situation, calling for the use of multiple techniques to properly monitor autophagy in each experimental setting. Finally, several core components of the autophagy machinery have been implicated in distinct autophagic processes (canonical and noncanonical autophagy), implying that genetic approaches to block autophagy should rely on targeting two or more autophagy-related genes that ideally participate in distinct steps of the pathway. Along similar lines, because multiple proteins involved in autophagy also regulate other cellular pathways including apoptosis, not all of them can be used as a specific marker for bona fide autophagic responses. Here, we critically discuss current methods of assessing autophagy and the information they can, or cannot, provide. Our ultimate goal is to encourage intellectual and technical innovation in the field

    Medicina de precisión: «Point of Care Ultrasound» (PoCUS) en el abordaje diagnóstico del paciente con hiponatremia

    No full text
    Resumen: La hiponatremia es un trastorno multifactorial definido como una disminución en la concentración plasmática de sodio. Su diagnóstico diferencial requiere una evaluación adecuada del volumen extracelular. Sin embargo, la determinación del volumen extracelular, simplemente basada en la historia clínica, las constantes vitales, el examen físico y los hallazgos de laboratorio, conducen en ocasiones a un diagnóstico erróneo por lo que el enfoque terapéutico puede ser equivocado. El empleo de ecografía a pie de cama (Point-of-Care Ultrasound [PoCUS]), mediante la combinación de ecografía pulmonar (Lung Ultrasound [LUS]), Venous Excess UltraSound (VExUS) y la ecocardioscopia (Focused Cardiac Ultrasound [FoCUS]) permiten, en combinación con el resto de los parámetros, una valoración holística mucho más precisa del estado del volumen extracelular del paciente. Abstract: Hyponatremia is a multifactorial disorder defined as a decrease in plasma sodium concentration. Its differential diagnosis requires an adequate evaluation of the extracellular volume. However, extracellular volume determination, simply based on the clinical history, vital signs, physical examination, and laboratory findings can leads to misdiagnosis and inappropriate treatment. The use of Point-of-Care Ultrasound (PoCUS), through the combination of Lung Ultrasound (LUS), Venous Excess UltraSound (VExUS) and Focused Cardiac Ultrasound (FoCUS), allows a much more accurate holistic assessment of the patient's extracellular volume status in combination with the other parameters
    corecore