Synthesis and process optimization of electrospun PEEK-sulfonated nanofibers by response surface methodology

In this study electrospun nanofibers of partially sulfonated polyether ether ketone have been produced as a preliminary step for a possible development of composite proton exchange membranes for fuel cells. Response surface methodology has been employed for the modelling and optimization of the electrospinning process, using a Box-Behnken design. The investigation, based on a second order polynomial model, has been focused on the analysis of the effect of both process (voltage, tip-to-collector distance, flow rate) and material (sulfonation degree) variables on the mean fiber diameter. The final model has been verified by a series of statistical tests on the residuals and validated by a comparison procedure of samples at different sulfonation degrees, realized according to optimized conditions, for the production of homogeneous thin nanofibers

Electrically Conductive Membranes Obtained by Simultaneous Electrospinning and Electrospraying Processes

Electrically conductive polyurethane nanostructured membranes have been prepared combining the electrospinning of polymer nanofibers (NFs) with the electrospraying of pristine multiwall carbon nanotubes (MWCNTs) in simultaneous processes. In order to have a better understanding of the distribution of MWCNTs on the surface of the membranes, the optimization of the electrospraying process has been carried out and the distribution of MWCNTs has been evaluated using image texture analysis techniques. Large membranes with a volume resistivity typical of electrostatic discharge materials with a MWCNTs concentration less than 0.3% wt (0.01 mg/cm2) have been obtained and characterized with morphological (SEM and TEM) and spectroscopic (UV-Vis, Raman) techniques

Effect of dual functional ionic liquids on the thermal degradation of poly(vinyl chloride)

The short-term thermal stability of PVC on addition of functional ionic liquids (ILs) based on phosphonium and pyridinium cations, and a docusate anion, was studied using FTIR, TGA-MS and TGA-FTIR. The thermal stability of PVC plasticized with these ILs is reduced and the activation energy for thermal degradation for the first step of PVC degradation lowered, relative to neat PVC. This feature is not dependent on the thermal stability of the IL itself, as their addition to neat PVC did not result in increased thermal stability of the resin. Analysis of the gases evolved during thermal degradation showed that there is no variation in the mechanism of PVC degradation in the presence of ILs, the only difference observed is that HCl is evolved at lower temperatures for PVC-ILs samples. The ILs had no effect on the second step of the thermal degradation of PVC. The decrease in the thermal stability of PVC-ILs is associated with two different effects: firstly, the anion weakens the C-H bond while the cation forms complexes and weakens the C-Cl bond; second, the IL interaction with the polymer chains partly substitutes the interaction between the polymer chain and heat stabilizers (e.g. stearates) added to the PVC compound. In this way, the latter tends to be expelled from the bulk polymer, thus not being available for PVC stabilization at high temperature. Heat stabilizer migration is related to the solvating power of the ILs: the higher the solvating power, the higher the migration of heat stabilizer, the lower the thermal stability of the polymer

TiO 2

As the debate about TiO2 food additive safety is still open, the present study focuses on the extraction and characterisation of TiO2 (nano)particles added as a whitening agent to confectionary products, that is, chewing gum pellets. The aim was to (1) determine the colloidal properties of suspensions mutually containing TiO2 and all other chewing gum ingredients in biologically relevant media (preingestion conditions); (2) characterise the TiO2 (nano)particles extracted from the chewing gum coating (after ingestion); and (3) verify their potential photocatalysis. The particle size distribution, in agreement with the zeta potential results, indicated that a small but significant portion of the particle population retained mean dimensions close to the nanosize range, even in conditions of moderate stability, and in presence of all other ingredients. The dispersibility was enhanced by proteins (i.e., albumin), which acted as surfactants and reduced particle size. The particle extraction methods involved conventional techniques and no harmful chemicals. The presence of TiO2 particles embedded in the sugar-based coating was confirmed, including 17–30% fraction in the nanorange (<100 nm). The decomposition of organics under UV irradiation proved the photocatalytic activity of the extracted (nano)particles. Surprisingly, photocatalysis occurred even in presence of an amorphous SiO2 layer surrounding the TiO2 particles

Portrait of an artist at work: exploring Max Ernst's surrealist techniques

AbstractMax Ernst was one of the most influential artists associated with both the Dada and Surrealist movements. However, until now, only few scientific studies have been devoted to his works. This paper presents the results of a multi-analytical investigation on six oil paintings, made between 1927 and 1942, belonging to the Peggy Guggenheim Collection in Venice (Solomon R. Guggenheim Foundation, New York). Through a combined art historical and scientific approach, this study aims at understanding Ernst's painting techniques, including frottage, grattage, dripping, and decalcomania, the used materials, and the state of conservation of the artworks. Non-invasive in situ investigations were performed by means of Vis–NIR multi-spectral imaging, X-ray fluorescence, external reflection FTIR and Raman spectroscopy. Imaging analysis revealed important information about Ernst's painting methods while the other techniques provided useful information about the ground layer, the painting materials and the presence of alteration products. Ernst's palette discloses great freedom in his use of materials and evolution during the time. This investigation demonstrates that an integrated, non-invasive, diagnostic approach provides a thorough analysis of materials and execution techniques of Ernst' masterworks allowing an in-depth knowledge of his highly skilled work

Wettability studies of topologically distinct titanium surfaces

Biomedical implants made of titanium-based materials are expected to have certain essential features including high bone-to-implant contact and optimum osteointegration, which are often influenced by the surface topography and physicochemical properties of titanium surfaces. The surface structure in the nanoscale regime is presumed to alter/facilitate the protein binding, cell adhesion and proliferation, thereby reducing post-operative complications with increased lifespan of biomedical implants. The novelty of our TiO2 nanostructures lies mainly in the high level control over their morphology and roughness by mere compositional change and optimisation of the experimental parameters. The present work focuses on the wetting behaviour of various nanostructured titanium surfaces towards water. Kinetics of contact area of water droplet on macroscopically flat, nanoporous and nanotubular titanium surface topologies was monitored under similar evaporation conditions. The contact area of the water droplet on hydrophobic titanium planar surface (foil) was found to decrease during evaporation, whereas the contact area of the droplet on hydrophobic nanorough titanium surfaces practically remained unaffected until the complete evaporation. This demonstrates that the surface morphology and roughness at the nanoscale level substantially affect the titanium dioxide surface–water droplet interaction, opposing to previous observations for microscale structured surfaces. The difference in surface topographic nanofeatures of nanostructured titanium surfaces could be correlated not only with the time-dependency of the contact area, but also with time-dependency of the contact angle and electrochemical properties of these surfaces

Association of kidney disease measures with risk of renal function worsening in patients with type 1 diabetes

Background: Albuminuria has been classically considered a marker of kidney damage progression in diabetic patients and it is routinely assessed to monitor kidney function. However, the role of a mild GFR reduction on the development of stage 653 CKD has been less explored in type 1 diabetes mellitus (T1DM) patients. Aim of the present study was to evaluate the prognostic role of kidney disease measures, namely albuminuria and reduced GFR, on the development of stage 653 CKD in a large cohort of patients affected by T1DM. Methods: A total of 4284 patients affected by T1DM followed-up at 76 diabetes centers participating to the Italian Association of Clinical Diabetologists (Associazione Medici Diabetologi, AMD) initiative constitutes the study population. Urinary albumin excretion (ACR) and estimated GFR (eGFR) were retrieved and analyzed. The incidence of stage 653 CKD (eGFR &lt; 60 mL/min/1.73 m2) or eGFR reduction &gt; 30% from baseline was evaluated. Results: The mean estimated GFR was 98 \ub1 17 mL/min/1.73m2 and the proportion of patients with albuminuria was 15.3% (n = 654) at baseline. About 8% (n = 337) of patients developed one of the two renal endpoints during the 4-year follow-up period. Age, albuminuria (micro or macro) and baseline eGFR &lt; 90 ml/min/m2 were independent risk factors for stage 653 CKD and renal function worsening. When compared to patients with eGFR &gt; 90 ml/min/1.73m2 and normoalbuminuria, those with albuminuria at baseline had a 1.69 greater risk of reaching stage 3 CKD, while patients with mild eGFR reduction (i.e. eGFR between 90 and 60 mL/min/1.73 m2) show a 3.81 greater risk that rose to 8.24 for those patients with albuminuria and mild eGFR reduction at baseline. Conclusions: Albuminuria and eGFR reduction represent independent risk factors for incident stage 653 CKD in T1DM patients. The simultaneous occurrence of reduced eGFR and albuminuria have a synergistic effect on renal function worsening