Prescribing infant formula to allergic babies

Exclusive breastfeeding and postponement of complementary foods to four to six months of age are recommended for the prevention of food allergies. However, many infants receive formula milk for a number of reasons. Various types of formula are indicated to prevent or treat allergy and food intolerance

Case Study: Nutritional management of a patient at high risk of developing refeeding syndrome

The following case study was discussed during the fourth-year dietetics evaluation process at North-West University, Potchefstroom Campus. It is a reflection of the opinion of the dietitians, students and lecturers involved, describes the actions taken during the nutritional management of the case, and is based on current literature and guidelines relevant to the topic

Implicit large-eddy simulation of a wingtip vortex

This is the author accepted manuscript. The final version is available from the publisher via the DOI in this recordIn this article, recent developments in numerical methods for performing a large-eddy simulation of the formation and evolution of a wingtip vortex are presented. The development of these vortices in the near wake, in combination with the large Reynolds numbers present in these cases, makes these types of test cases particularly challenging to investigate numerically. First, an overview is given of the spectral vanishing viscosity/implicit large-eddy simulation solver that is used to perform the simulations, and techniques are highlighted that have been adopted to solve various numerical issues that arise when studying such cases. To demonstrate the method's viability, results are presented from numerical simulations of flow over a NACA 0012 profile wingtip at R ec = 1.2 × 10 6 and they are compared against experimental data, which is to date the highest Reynolds number achieved for a large-eddy simulation that has been correlated with experiments for this test case. The model in this paper correlates favorably with experiment, both for the characteristic jetting in the primary vortex and pressure distribution on the wing surface. The proposed method is of general interest for the modeling of transitioning vortex-dominated flows over complex geometries.The authors acknowledge support from the United Kingdom Turbulence Consortium (UKTC) under grant EP/L000261/1 as well as from the Engineering and Physical Sciences Research Council (EPSRC) for access to ARCHER UK National Supercomputing Service (http://www.archer.ac.uk). DM acknowledges supported by the Laminar Flow Control Centre funded by Airbus/EADS and EPSRC under grant EP/I037946. SJS additionally acknowledges Royal Academy of Engineering support under their research chair scheme. We also acknowledge the support from the Imperial College London High Performance Computing facilities

Developing self-regulation for dietary temptations: intervention effects on physical, self-regulatory and psychological outcomes

We aimed to investigate whether a self-regulatory skills intervention can improve weight loss-related outcomes. Fifty-five participants (M BMI = 32.60 ± 4.86) were randomized into self-regulation training and advice groups and received two training workshops and weekly practice tasks. The self-regulation training group was trained to use six self-regulatory skills: Delayed gratification, thought control, goal setting, self-monitoring, mindfulness, and coping. The advice group received dietary and physical activity advice for weight loss. Physical, self-regulatory, and psychological measures were taken at baseline, end of intervention (week 8) and at follow-up (week 12). Using intention-to-treat analysis, weight, waist circumference, body fat and body mass index (BMI) were significantly reduced at follow-up for both groups. There were significant increases in all six self-regulatory skills and the psychological measures of self-efficacy, self-regulatory success, and physical self-worth for both groups. Results indicate that self-regulatory skills training might be as effective as dietary and physical activity advice in terms of weight loss and related outcomes

Promotion of protocell self-assembly from mixed amphiphiles at the origin of life

Vesicles formed from single-chain amphiphiles (SCAs) such as fatty acids probably played an important role in the origin of life. A major criticism of the hypothesis that life arose in an early ocean hydrothermal environment is that hot temperatures, large pH gradients, high salinity and abundant divalent cations should preclude vesicle formation. However, these arguments are based on model vesicles using 1–3 SCAs, even though Fischer–Tropsch-type synthesis under hydrothermal conditions produces a wide array of fatty acids and 1-alkanols, including abundant C10–C15 compounds. Here, we show that mixtures of these C10–C15 SCAs form vesicles in aqueous solutions between pH ~6.5 and >12 at modern seawater concentrations of NaCl, Mg2+ and Ca2+. Adding C10 isoprenoids improves vesicle stability even further. Vesicles form most readily at temperatures of ~70 °C and require salinity and strongly alkaline conditions to self-assemble. Thus, alkaline hydrothermal conditions not only permit protocell formation at the origin of life but actively favour it

Lithic technological responses to Late Pleistocene glacial cycling at Pinnacle Point Site 5-6, South Africa

There are multiple hypotheses for human responses to glacial cycling in the Late Pleistocene, including changes in population size, interconnectedness, and mobility. Lithic technological analysis informs us of human responses to environmental change because lithic assemblage characteristics are a reflection of raw material transport, reduction, and discard behaviors that depend on hunter-gatherer social and economic decisions. Pinnacle Point Site 5-6 (PP5-6), Western Cape, South Africa is an ideal locality for examining the influence of glacial cycling on early modern human behaviors because it preserves a long sequence spanning marine isotope stages (MIS) 5, 4, and 3 and is associated with robust records of paleoenvironmental change. The analysis presented here addresses the question, what, if any, lithic assemblage traits at PP5-6 represent changing behavioral responses to the MIS 5-4-3 interglacial-glacial cycle? It statistically evaluates changes in 93 traits with no a priori assumptions about which traits may significantly associate with MIS. In contrast to other studies that claim that there is little relationship between broad-scale patterns of climate change and lithic technology, we identified the following characteristics that are associated with MIS 4: increased use of quartz, increased evidence for outcrop sources of quartzite and silcrete, increased evidence for earlier stages of reduction in silcrete, evidence for increased flaking efficiency in all raw material types, and changes in tool types and function for silcrete. Based on these results, we suggest that foragers responded to MIS 4 glacial environmental conditions at PP5-6 with increased population or group sizes, 'place provisioning', longer and/or more intense site occupations, and decreased residential mobility. Several other traits, including silcrete frequency, do not exhibit an association with MIS. Backed pieces, once they appear in the PP5-6 record during MIS 4, persist through MIS 3. Changing paleoenvironments explain some, but not all temporal technological variability at PP5-6.Social Science and Humanities Research Council of Canada; NORAM; American-Scandinavian Foundation; Fundacao para a Ciencia e Tecnologia [SFRH/BPD/73598/2010]; IGERT [DGE 0801634]; Hyde Family Foundations; Institute of Human Origins; National Science Foundation [BCS-9912465, BCS-0130713, BCS-0524087, BCS-1138073]; John Templeton Foundation to the Institute of Human Origins at Arizona State Universit

Estimating a threshold price for CO2 emissions of buildings to improve their energy performance level. Case study of a new Spanish home

Energy consumption in homes produces CO2. In many countries, building regulations are being set to enable energy efficiency performance levels to be issued. In Spain, there is a regulated procedure to certify the energy performance of buildings according to their CO2 emissions. Consequently, some software tools have been design to simulate buildings and to obtain their energy consumption and CO2 emissions. In this paper the investment, maintenance and energy consumption costs are calculated for different energy performance levels and for various climatic zones, in a single-family home. According to the results, more energy efficient buildings imply higher construction and maintenance costs, which are not compensated by lower energy costs. Therefore, under current conditions, economic criteria do not support the improvement of the energy efficiency of a dwelling. Among the possible measures to promote energy efficiency, a price on CO2 emissions is to be suggested, including the social cost in the analysis. For this purpose, the cost-optimal methodology is used. In different scenarios for the discount rate y energy prices, various prices for CO2 are obtained, depending on the climatic zone and energy performance level.Ruá Aguilar, MJ.; Guadalajara Olmeda, MN. (2015). Estimating a threshold price for CO2 emissions of buildings to improve their energy performance level. Case study of a new Spanish home. Energy Efficiency. 8(2):183-203. doi:10.1007/s12053-014-9286-2S18320382AICIA. (2009). Escala de calificación energética. Edificios de nueva construcción. Madrid: Instituto para la Diversificación y Ahorro de la Energía, Ministerio de Industria, Turismo y Comercio.Al-Homoud, M. S. (2005). Performance characteristics and practical applications of common building thermal insulation materials. Building and Environment, 40(3), 353–360.Amecke, H. (2012). The impact of energy performances certificates: a survey of German home owners. Energy Policy, 46, 4–14.Andaloro, A., Salomone, R., Ioppolo, G., & Andaloro, L. (2010). Energy certification of buildings: a comparative analysis of progress towards implementation in European countries. Energy Policy, 38(10), 5840–5866.Annunziata, E., Frey, M., & Rizzi, F. (2013). Towards nearly zero-energy buildings: the state-of-art of national regulations in Europe. Energy, 57, 125–133. doi: 10.1016/j.energy.2012.11.049 .Audenaert, A., De Boeck, L., & Roelants, K. (2010). Economic analysis of the profitability of energy-saving architectural measures for the achievement of the EPBD-standard. Energy, 35(7), 2965–2971.Bertrán, A. (2009). Las mediciones en las obras adaptadas al CTE (4th ed.). Granada: Editorial Jorge Loring S.I.Brathal, D., & Langemo, M. (2004). Facilities management: a guide for total workplace design and management. Grand Forks: Knight Printing.Brown, D. W. (1996). Facility maintenance: the manager’s practical guide and handbook. New York: AMACOM American Management Association. New York, NY 10019.Concerted Action EPBD (2008). Implementation of the energy performance of buildings directive. Country reports 2008. Brussels: Directorate General for Energy and Transport, European Commission (available at www.epbd.ca.eu and www.buildup.eu ).Concerted Action EPBD (2011). Implementing the energy performance of buildings directive. Country reports 2011. Brussels: European Union (available at www.epbd.ca.eu and www.buildup.eu ).Davies, H., & Wyatt, D. (2004). Appropriate use or method for durability and service life prediction. Building Research and Information, 32(6), 552–553.Dresner, S., & Ekins, P. (2006). Economic instruments to improve UK home energy efficiency without negative social impacts. Fiscal Studies, 27(1), 47–74.Drury, C. (2008). Management and cost accounting, 7th ed. London.Eurostat European Comission, Instituto de Diversificación y Ahorro de Energía (IDAE), Ministerio de Industria, Energía y Turismo (2011). Proyecto SECH-SPAHOUSEC. Análisis del consumo energético del sector residencial en España. Informe Final. Madrid.Fraunhofer Institute for Systems and Innovation Research ISI (Germany) (2012). Financing the energy efficient transformation of the building sector in the EU. Lessons from the ODYSSEE-MURE project.Garrido, N., Almecija, J. C., Folch, C., Martínez, I. (2011). Certificación energética de edificios. Grupo de Estudios de Energía para la Sostenibilidad (CEES). Cátedra Unesco Sostenibilidad, Universitat Politècnica de Catalunya. (Available at: upcommons.upc.edu/e-prints/bitstream/2117/11820/1/GAS Natural_090406.pdf).Gómez, J. M., & Esteban, M. A. (2010). Sostenibilidad en la edificación. Comparación de dos tipologías constructivas. Rendimiento de los recursos. Ingeniería de Edificación Universitat Politècnica de Catalunya. (Available at: upcommons.upc.edu/pfc/bitstream/2099.1/…/1/PFG_Completo.pdf).Gram-Hanssen, K., Bartiaux, F., Michael Jensen, O., & Cantaert, M. (2007). Do homeowners use energy labels? A comparison between Denmark and Belgium. Energy Policy, 35(5), 2879–2888.Institut de Tecnologia de la Construcció de Catalunya (ITEC) (1991a). Manual de uso y conservación de la vivienda. COAAT Principado de Asturias. Simancas Ediciones S.A. Valladolid.Institut de Tecnologia de la Construcció de Catalunya (ITEC). (1991b). Manteniment de l’edifici. Fitxes (1st ed.). Badalona: Gràfiques Pacífic.Institut de Tecnologia de la Construcció de Catalunya (ITEC). (1991c). Manteniment instal.lacions. Fitxes (1st ed.). Badalona: Gràfiques Pacífic.Institut de Tecnologia de la Construcció de Catalunya (ITEC). (1991d). Manteniment urbanització. Fitxes (1st ed.). Badalona: Gràfiques Pacífic.Institut de Tecnologia de la Construcció de Catalunya (ITEC). (1994). L’actualitat i el cost del manteniment en edificis d’habitatge. Guia pràctic (1st ed.). Barcelona: Gama S.L. Servicios editoriales.Institut de Tecnologia de la Construcció de Catalunya (ITEC). (1996). Ús i manteniment de l’habitatge. Quadern de l’usuari (1st ed.). Zaragoza: Gràfiques Cometa.Institut de Tecnologia de la Construcció de Catalunya (ITEC) (1997). La vivienda: Manual de uso y mantenimient, COAAT de Cantabria. 1ª ed.Institut de Tecnologia de la Construcció de Catalunya (ITEC) (1999). La vivienda: Manual de uso y mantenimiento, COAAT Principado de Asturias. 2ª ed. Simancas Edicionas S.A. Valladolid.Instituto de Diversificación y Ahorro de Energía (IDAE), Ministerio de Industria, Turismo y Comercio (MITYC) (2010). Guía Técnica: Condiciones climáticas exteriores de proyecto, (available at: http://www.minetur.gob.es/energia/desarrollo/eficienciaenergetica/rite/reconocidos/reconocidos/condicionesclimaticas.pdf ).Instituto Eduardo Torroja de Ciencias de la Construcción (IETCC) (2010). Catálogo de Elementos Constructivos del Código Técnico, versión CAT-EC-v06.3-MARZO10. Madrid.Jáber-López, J. T., Valencia-Salazar, I., Peñalvo-López, E., Álvarez-Bel, C., Rivera-López, R., Merino-Hernández, E. (2011). Are energy certification tools for buildings effective? A Spanish case study, Proceedings of the 2011 3rd International Youth Conference on Energetics. Leiria, July 7–9.Johnstone, I. M. (2001a). Energy and mass flows of housing: a model and example. Building and Environment, 36, 27–41.Johnstone, I. M. (2001b). Energy and mass flows of housing: estimating mortality. Building and Environment, 36, 43–51.Kaiser, H. H. (2001). The facilities audit. A process for improving facilities conditions. Arlington: Kirby Lithographic. APPA. The Association of Higher Education Facilities Officers.Kjaerbye, V. H. (2008). Does energy label on residential housing cause energy savings? AKF, Danish Institute of Governmental Research.La Roche, P. (2010). Calculating green house emissions for houses: analysis of the performance of several carbon counting tools in different climates. Informes de la Construcción, 62(517), 61–80.Larsen, B. M., & Nebakken, R. (1997). Norwegian emissions of CO2 1987–1994. Environmental and Resource Economics, 9, 275–290.Laustsen, J. (2008). Energy efficiency requirements in building codes, energy efficiency policies for new buildings. Paris: International Energy Agency information paper.Linares, P., & Labandeira, X. (2010). Energy efficiency: economics and policy. Journal of Economic Surveys, 24(3), 573–592.Liska, R. W. (2000). Means facilities maintenance standards. Kingston: R.S. Means Company, Inc. Construction Publishers & Consultants.Majcen, D., Itard, H., & Visscher, H. (2013). Theoretical vs. actual energy consumption of labelled dwellings in the Netherlands: discrepancies and policy implications. Energy Policy, 54, 125–136.Mercader, M. P., Olivares, M., & Ramírez de Arellano, A. (2012). Modelo de cuantificación del consumo energético en edificación. Informes de la Construcción, 62(308), 567–582.Ministry of Development of Spain. Directorate for Architecture, Housing and Planning. Report on cost optimal calculations and comparison with the current and future energy performance requirements of buildings in Spain. Version 1.1, 7th June 2013.Pérez-Lombard, L., Ortiz, J., & González, R. (2009). A review of benmarching, rating and labelling concepts within the framework of building energy certification schemes. Energy and Buildings, 41(3), 272–278.Piper, J. E. (1995). Handbook of facility management: tools and techniques, formulas and tables. Upper Saddle River: Prentice Hall Inc.Popescu, D., Bienert, S., Schützenhofer, C., & Boazu, R. (2012). Impact of energy efficiency measures on the economic value of buildings. Applied Energy, 89(1), 454–463.Ramírez de Arellano, A. (2004). Presupuestación de obras. 3ª ed. Universidad de Sevilla. Secretariado de Publicaciones. Colección Manuales Universitarios, 37.Rodríguez-González, A. B., Vinagre-Díaz, J. J., Caañamo, A. J., & Wilby, M. R. (2011). Energy and buildings, 43(4), 980–987.Ruá, M. J., & Guadalajara, N. (2013). Application of compromise programming to a semi-detached housing development in order to balance economic and environmental criteria. Journal of the Operational Research Society, 64, 459–468.Ruá, M. J., & Guadalajara, N. (2014). Using the building energy rating software for mathematically modelling operation costs in a simulated home. International Journal of Computer Mathematics. doi: 10.1080/00207160.2014.892588 .Ruá, M. J., & López-Mesa, B. (2012). Certificación energética de edificios en España y sus implicaciones económicas. Informes de la Construcción, 64(527), 307–318.Rudbeck, C. (2002). Service life of building envelope components: making it operational in economical assessment. Construction and Building Materials, 16(2), 83–89.Ruiz, M. C., & Romero, E. (2011). Energy saving in the conventional design of a Spanish house using thermal simulation. Energy and Building, 43(11), 3226–3235.Sanstad, A. H., Blumstein, C., & Stoff, S. E. (1995). How high are option values in energy-efficiency investments? Energy Policy, 23(9), 739–743.Sumner, J., Bird, L., Smith, H. (2009). Carbon taxes: a review of experience and policy design consideration. Technical Report NREL/TP-6A2-47312. National Renewable Energy Laboratory. US Department of Energy.Tuominen, P., Forsström, J., & Honkatukia, J. (2013). Economic effects of energy efficiency improvements in the Finnish building stock. Energy Policy, 52, 181–189.Ucar, A., & Balo, F. (2009). Effect of fuel type on the optimum thickness of selected insulation materials for the four different climatic regions of Turkey. Applied Energy, 86(5), 730–736.Universidad Politécnica De Madrid. Departamento de Construcción y Vías Rurales (2009). Evaluación de los costes constructivos y consumos energéticos derivados de la calificación energética de viviendas. Precost&E. Fase1.Uzsilaityte, L., & Martinaitis, V. (2010). Search for optimal solution of public building renovation in terms of life cycle. Journal of Environmental Engineering and Landscape Management, 18(2), 102–110.Verbruggen, A. (2012). Financial appraisal of efficiency investments: why the good may be the worst enemy of the best. Energy Efficiency, 5, 571–582

Interrupting peptidoglycan deacetylation during Bdellovibrio predator-prey interaction prevents ultimate destruction of prey wall, liberating bacterial-ghosts

The peptidoglycan wall, located in the periplasm between the inner and outer membranes of the cell envelope in Gram-negative bacteria, maintains cell shape and endows osmotic robustness. Predatory Bdellovibrio bacteria invade the periplasm of other bacterial prey cells, usually crossing the peptidoglycan layer, forming transient structures called bdelloplasts within which the predators replicate. Prey peptidoglycan remains intact for several hours, but is modified and then degraded by predators escaping. Here we show predation is altered by deleting two Bdellovibrio N-acetylglucosamine (GlcNAc) deacetylases, one of which we show to have a unique two domain structure with a novel regulatory-”plug”. Deleting the deacetylases limits peptidoglycan degradation and rounded prey cell “ghosts” persist after mutant-predator exit. Mutant predators can replicate unusually in the periplasmic region between the peptidoglycan wall and the outer membrane rather than between wall and inner-membrane, yet still obtain nutrients from the prey cytoplasm. Deleting two further genes encoding DacB/PBP4 family proteins, known to decrosslink and round prey peptidoglycan, results in a quadruple mutant Bdellovibrio which leaves prey-shaped ghosts upon predation. The resultant bacterial ghosts contain cytoplasmic membrane within bacteria-shaped peptidoglycan surrounded by outer membrane material which could have promise as “bacterial skeletons” for housing artificial chromosomes

Characterisation of pathogen-specific regions and novel effector candidates in Fusarium oxysporum f. sp. cepae

A reference-quality assembly of Fusarium oxysporum f. sp. cepae (Foc), the causative agent of onion basal rot has been generated along with genomes of additional pathogenic and non-pathogenic isolates of onion. Phylogenetic analysis confirmed a single origin of the Foc pathogenic lineage. Genome alignments with other F. oxysporum ff. spp. and non pathogens revealed high levels of syntenic conservation of core chromosomes but little synteny between lineage specific (LS) chromosomes. Four LS contigs in Foc totaling 3.9 Mb were designated as pathogen-specific (PS). A two-fold increase in segmental duplication events was observed between LS regions of the genome compared to within core regions or from LS regions to the core. RNA-seq expression studies identified candidate effectors expressed in planta, consisting of both known effector homologs and novel candidates. FTF1 and a subset of other transcription factors implicated in regulation of effector expression were found to be expressed in planta