Development of composite scaffolds based on cerium doped-hydroxyapatite and natural gums-biological and mechanical properties

Hydroxyapatite (HAp) is a ceramic material composing the inorganic portion of bones. Ionic substitutions enhance characteristics of HAp, for example, calcium ions (Ca2+) by cerium ions (Ce3+). The use of HAp is potentialized through biopolymers, cashew gum (CG), and gellan gum (GG), since CG/GG is structuring agents in the modeling of structured biocomposites, scaffolds. Ce-HApCG biocomposite was synthesized using a chemical precipitation method. The obtained material was frozen (–20 °C for 24 h), and then vacuum dried for 24 h. The Ce-HApCG was characterized by X-Ray diffractograms (XRD), X-ray photoemission spectra (XPS), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), and energy dispersive spectroscopy (EDS). XRD and FTIR showed that Ce-HApCG was successfully synthesized. XRD showed characteristic peaks at 2θ = 25.87 and 32.05, corresponding to the crystalline planes (0 0 2) and (2 1 1), respectively, while phosphate bands were present at 1050 cm−1 and 1098 cm−1, indicating the success of composite synthesis. FESEM showed pores and incorporated nanostructured granules of Ce-HApCG. The mechanical test identified that Ce-HApCG has a compressive strength similar to the cancellous bone’s strength and some allografts used in surgical procedures. In vitro tests (MTT assay and hemolysis) showed that scaffold was non-toxic and exhibited low hemolytic activity. Thus, the Ce-HApCG has potential for application in bone tissue engineering.info:eu-repo/semantics/publishedVersio

BIOCOMPATIBILIDADE EM FILMES DE HIDROXIAPATITA REFORÇADA COM NANOTUBOS DE CARBONO

As características químicas e estruturais individuais de nanotubos de carbono (NTC) e hidroxiapatita (HAp), principal constituinte da fase inorgânica do osso, possibilitam seu uso na área médica como materiais biocompatíveis em implantes e próteses. O objetivo deste trabalho é estudar a biocompatibilidade do compósito HAp/NTC eletrodepositadas comitantemente em aço 316. Para a produção dos compósitos os NTC foram dispersos na solução eletrolítica em concentrações de 1% e 3%. Os resultados obtidos in vitro, utilizando o ensaio da Lactato Desidrogenase (LDH), demostraram que nenhuma amostra causou citotoxicidade nas células osteoblásticas. Neste estudo, também foram avaliados genes relacionados à osteogênese, tais como: fosfatase alcalina (ALP), osteopontina (OPN), osteocalcina (OC) por RT-qPCR (Transcrição Reversa – Reação em Cadeia da Polimerase quantitativa), após 14 dias. Os osteoblastos em contato com a HAp/NTC apresentaram aumento da expressão de genes importantes no processo de mineralização e maturação óssea. Os resultados demonstraram um grande potencial de aplicação clínica deste compósito

A novel bioresorbable device as a controlled release system for protecting cells from oxidative stress from Alzheimer’s Disease

Bioresorbable electrospun fibres have highly functional features that can preserve drug efficacy, avoiding premature degradation, and control drug release rates over long periods. In parallel, it is known that Alzheimer’s disease (AD) has been linked to impaired insulin signalling in the brain. Glucagon-like peptide 1 (GLP-1) analogues have beneficial effects on insulin release and possess exceptional neuroprotective properties. Herein, we describe for the first time the incorporation of a GLP-1 analogue, liraglutide, into electrospun poly (lactic acid) (PLA) fibres with in situ gelatin capsules, in order to provide the controlled release of liraglutide, improving neuroprotective properties. In this study, PLA, a bioresorbable polymer in which degradation products have neurogenesis characteristics, was electrospun and loaded with liraglutide. Moreover, PLA/liraglutide fibres were encapsulated with gelatin and were shown to have better properties than the non-encapsulated fibres in terms of the controlled release of liraglutide, which was accomplished in the present study for up to 60 days. We observed that this biodevice was completely encapsulated with gelatin, which made the material more hydrophilic than PLA fibres alone and the biodevice was able to enhance fibroblast interaction and reduce mitochondrial stress in a neuroblastoma cell line. In this manner, this study introduces a new material which can improve neuroprotective properties from AD oxidative stress via the sustained long-lasting release of liraglutide

Measurement of the p-pbar -> Wgamma + X cross section at sqrt(s) = 1.96 TeV and WWgamma anomalous coupling limits

The WWgamma triple gauge boson coupling parameters are studied using p-pbar -> l nu gamma + X (l = e,mu) events at sqrt(s) = 1.96 TeV. The data were collected with the DO detector from an integrated luminosity of 162 pb^{-1} delivered by the Fermilab Tevatron Collider. The cross section times branching fraction for p-pbar -> W(gamma) + X -> l nu gamma + X with E_T^{gamma} > 8 GeV and Delta R_{l gamma} > 0.7 is 14.8 +/- 1.6 (stat) +/- 1.0 (syst) +/- 1.0 (lum) pb. The one-dimensional 95% confidence level limits on anomalous couplings are -0.88 < Delta kappa_{gamma} < 0.96 and -0.20 < lambda_{gamma} < 0.20.Comment: Submitted to Phys. Rev. D Rapid Communication

Measurement of the ttbar Production Cross Section in ppbar Collisions at sqrt{s} = 1.96 TeV using Kinematic Characteristics of Lepton + Jets Events

We present a measurement of the top quark pair ttbar production cross section in ppbar collisions at a center-of-mass energy of 1.96 TeV using 230 pb**{-1} of data collected by the DO detector at the Fermilab Tevatron Collider. We select events with one charged lepton (electron or muon), large missing transverse energy, and at least four jets, and extract the ttbar content of the sample based on the kinematic characteristics of the events. For a top quark mass of 175 GeV, we measure sigma(ttbar) = 6.7 {+1.4-1.3} (stat) {+1.6- 1.1} (syst) +/-0.4 (lumi) pb, in good agreement with the standard model prediction.Comment: submitted to Phys.Rev.Let

Measurement of the ttbar Production Cross Section in ppbar Collisions at sqrt(s)=1.96 TeV using Lepton + Jets Events with Lifetime b-tagging

We present a measurement of the top quark pair ($t\bar{t}$) production cross section ($\sigma_{t\bar{t}}$) in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV using 230 pb$^{-1}$ of data collected by the D0 experiment at the Fermilab Tevatron Collider. We select events with one charged lepton (electron or muon), missing transverse energy, and jets in the final state. We employ lifetime-based b-jet identification techniques to further enhance the $t\bar{t}$ purity of the selected sample. For a top quark mass of 175 GeV, we measure $\sigma_{t\bar{t}}=8.6^{+1.6}_{-1.5}(stat.+syst.)\pm 0.6(lumi.)$ pb, in agreement with the standard model expectation.Comment: 7 pages, 2 figures, 3 tables Submitted to Phys.Rev.Let

Search for R-parity violating supersymmetry via the LLE couplings lambda_{121}, lambda_{122} or lambda_{133} in ppbar collisions at sqrt(s)=1.96 TeV

A search for gaugino pair production with a trilepton signature in the framework of R-parity violating supersymmetry via the couplings lambda_121, lambda_122, or lambda_133 is presented. The data, corresponding to an integrated luminosity of L~360/pb, were collected from April 2002 to August 2004 with the D0 detector at the Fermilab Tevatron Collider, at a center-of-mass energy of sqrt(s)=1.96 TeV. This analysis considers final states with three charged leptons with the flavor combinations eel, mumul, and eetau (l=e or mu). No evidence for supersymmetry is found and limits at the 95% confidence level are set on the gaugino pair production cross section and lower bounds on the masses of the lightest neutralino and chargino are derived in two supersymmetric models.Comment: 9 pages, 4 figures (fig2 includes 3 subfigures