Chemical speciation and risk assessment of cadmium in soils around atypical coal mining area of China

The distribution characteristics of Cadmium (Cd) fractions in soils around a coal mining area of Huaibei coalfield were investigated, with the aim to assess its ecological risk. The total Cd concentrations in soils ranged from 0.05 to 0.87 mg/kg. The high percentage of phyto-available Cd (58%) when redox or base-acid equilibria changed. Soil pH was found to be a crucial factor affecting soil Cd fraction, and carbonate-bound Cd can be significantly affected by both organic matter and pH of soils. The static ecological evaluation models, including potential ecological risk index (PERI), geo-accumulation index (Igeo) and risk assessment code (RAC), revealed a moderate soil Cd contamination and prensented high Cd exposure risk in studied soils. However, the dynamic evaluation of Cd risk, determined using a delayed geochemical hazard (DGH), suggested that our studied soils can be classified as median-risk with a mean probability of 24.79% for Cd DGH. These results provide a better assessment for the risk development of Cd contamination in coal mining areas

Bacteriophages of wastewater foaming-associated filamentous Gordonia reduce host levels in raw activated sludge

Filamentous bacteria are a normal and necessary component of the activated sludge wastewater treatment process, but the overgrowth of filamentous bacteria results in foaming and bulking associated disruptions. Bacteriophages, or phages, were investigated for their potential to reduce the titer of foaming bacteria in a mixed-microbial activated sludge matrix. Foaming-associated filamentous bacteria were isolated from activated sludge of a commercial wastewater treatment plan and identified as Gordonia species by 16S rDNA sequencing. Four representative phages were isolated that target G. malaquae and two un-named Gordonia species isolates. Electron microscopy revealed the phages to be siphophages with long tails. Three of the phages - GordTnk2, Gmala1, and GordDuk1 - had very similar ~76 kb genomes, with >93% DNA identity. These genomes shared limited synteny with Rhodococcus equi phage ReqiDocB7 and Gordonia phage GTE7. In contrast, the genome of phage Gsput1 was smaller (43 kb) and was not similar enough to any known phage to be placed within an established phage type. Application of these four phages at MOIs of 5–15 significantly reduced Gordonia host levels in a wastewater sludge model by approximately 10-fold as compared to non-phage treated reactors. Phage control was observed for nine days after treatment

Molecular analysis of the microbial community structures in water-flooding petroleum reservoirs with different temperatures

published_or_final_versio

Quick and sensitive determination of gene expression of fatty acid synthase in vitro by using real-time polymerase chain reaction amplification (PCR)

Obesity results from an imbalance between energy intake and energy expenditure, which leads to a pathological accumulation of adipose tissue, but the underlying mechanism at gene level, is far from being elucidated. The objective of this study was to investigate the correlation between mRNA express from fatty acid synthase (FAS) with a different glucose level in primary adipocytes by real-time polymerase chain reaction amplification (PCR), which can aid in the understanding of the mechanism of obesity in vitro. By using the following formula, this study was able to quantify the mRNA expression of FAS of unknown samples: Y = -3.156X + 41.21 (Y = threshold cycle, X = log starting quantity). The high concentrations of glucose group significantly improved the mRNA expression of FAS (P < 0.01) rather than 0.25 and 0% concentrations of glucose. These results provide significant data that confirm an association between different glucose level and FAS expression in preadipocytes. The glucose concentration of the high group substantially augmented the mRNA expression of FAS.Key words: Expression, fatty acid synthase, lipid deposition, real-time polymerase chain reaction amplification (PCR)

Algorithms for Colourful Simplicial Depth and Medians in the Plane

The colourful simplicial depth of a point x in the plane relative to a configuration of n points in k colour classes is exactly the number of closed simplices (triangles) with vertices from 3 different colour classes that contain x in their convex hull. We consider the problems of efficiently computing the colourful simplicial depth of a point x, and of finding a point, called a median, that maximizes colourful simplicial depth. For computing the colourful simplicial depth of x, our algorithm runs in time O(n log(n) + k n) in general, and O(kn) if the points are sorted around x. For finding the colourful median, we get a time of O(n^4). For comparison, the running times of the best known algorithm for the monochrome version of these problems are O(n log(n)) in general, improving to O(n) if the points are sorted around x for monochrome depth, and O(n^4) for finding a monochrome median.Comment: 17 pages, 8 figure

Complete genome sequence of burkholderia gladioli Phage Maja

Burkholderia gladioli is a Gram-negative bacterium associated with cystic fibrosis infections. Here, we describe the genome sequence of B. gladioli phage Maja. Maja is most related to another Burkholderia phage, BcepF1, and may be a temperate phage, despite the absence of repressor or integrase homologs in its genome sequence.Fil: Yu, Zihao. Texas A&M University; Estados UnidosFil: Yao, Guichun. Texas A&M University; Estados UnidosFil: Vizoso Pinto, María Guadalupe. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Tucumán. Instituto Superior de Investigaciones Biológicas. Universidad Nacional de Tucumán. Instituto Superior de Investigaciones Biológicas; ArgentinaFil: Sun, Lichang. Jiangsu Academy Of Agricultural Sciences; ChinaFil: Young, Ry. Texas A&M University; Estados UnidosFil: Gonzalez, Carlos. Texas A&M University; Estados UnidosFil: Liu, Mei. Texas A&M University; Estados Unido

LNK (SH2B3): paradoxical effects in ovarian cancer.

LNK (SH2B3) is an adaptor protein studied extensively in normal and malignant hematopoietic cells. In these cells, it downregulates activated tyrosine kinases at the cell surface resulting in an antiproliferative effect. To date, no studies have examined activities of LNK in solid tumors. In this study, we found by in silico analysis and staining tissue arrays that the levels of LNK expression were elevated in high-grade ovarian cancer. To test the functional importance of this observation, LNK was either overexpressed or silenced in several ovarian cancer cell lines. Remarkably, overexpression of LNK rendered the cells resistant to death induced by either serum starvation or nutrient deprivation, and generated larger tumors using a murine xenograft model. In contrast, silencing of LNK decreased ovarian cancer cell growth in vitro and in vivo. Western blot studies indicated that overexpression of LNK upregulated and extended the transduction of the mitogenic signal, whereas silencing of LNK produced the opposite effects. Furthermore, forced expression of LNK reduced cell size, inhibited cell migration and markedly enhanced cell adhesion. Liquid chromatography-mass spectroscopy identified 14-3-3 as one of the LNK-binding partners. Our results suggest that in contrast to the findings in hematologic malignancies, the adaptor protein LNK acts as a positive signal transduction modulator in ovarian cancers

Waterproofed Photomultiplier Tube Assemblies for the Daya Bay Reactor Neutrino Experiment

In the Daya Bay Reactor Neutrino Experiment 960 20-cm-diameter waterproof photomultiplier tubes are used to instrument three water pools as Cherenkov detectors for detecting cosmic-ray muons. Of these 960 photomultiplier tubes, 341 are recycled from the MACRO experiment. A systematic program was undertaken to refurbish them as waterproof assemblies. In the context of passing the water leakage check, a success rate better than 97% was achieved. Details of the design, fabrication, testing, operation, and performance of these waterproofed photomultiplier-tube assemblies are presented.Comment: 16 pages, 11 figures. Submitted to Nucl. Instr. Met

Application of a central design composed of surface of response for the determination of the flatness in the steel sheets of a Colombian steel

In this paper the results of research are shown in which the response surface was applied with central composite design for estimating the values of flatness as shown and accepted by the quality department and production company of the Caribbean region, taking into account factors such as voltage control in the winding sheet and the coefficient of friction. Initially, a first-order model was proposed to estimate the variance of the error and consider a quantitative model that takes into account the effects of combination. The method of steepest descent is used to sequentially move the descent path, i.e., in the direction of the minimum response decrement, until a new interval near optimal experimentation. Subsequently, a model of higher order was developed using a central composite design with center points and stars, taking into account control other variables additional response flatness, such as the roughness and hardness of the sheets in a range of flexible and acceptable tolerances for the company through a canonical model, and that will be the focus of future research

In situ epitaxial engineering of graphene and h-BN lateral heterostructure with a tunable morphology comprising h-BN domains

Graphene and hexagonal boron nitride (h-BN), as typical two-dimensional (2D) materials, have long attracted substantial attention due to their unique properties and promise in a wide range of applications. Although they have a rather large difference in their intrinsic bandgaps, they share a very similar atomic lattice; thus, there is great potential in constructing heterostructures by lateral stitching. Herein, we present the in situ growth of graphene and h-BN lateral heterostructures with tunable morphologies that range from a regular hexagon to highly symmetrical star-like structure on the surface of liquid Cu. The chemical vapor deposition (CVD) method is used, where the growth of the h-BN is demonstrated to be highly templated by the graphene. Furthermore, large-area production of lateral G-h-BN heterostructures at the centimeter scale with uniform orientation is realized by precisely tuning the CVD conditions. We found that the growth of h-BN is determined by the initial graphene and symmetrical features are produced that demonstrate heteroepitaxy. Simulations based on the phase field and density functional theories are carried out to elucidate the growth processes of G-h-BN flakes with various morphologies, and they have a striking consistency with experimental observations. The growth of a lateral G-h-BN heterostructure and an understanding of the growth mechanism can accelerate the construction of various heterostructures based on 2D materials