96 research outputs found
Self-supervised learning: When is fusion of the primary and secondary sensor cue useful?
Self-supervised learning (SSL) is a reliable learning mechanism in which a
robot enhances its perceptual capabilities. Typically, in SSL a trusted,
primary sensor cue provides supervised training data to a secondary sensor cue.
In this article, a theoretical analysis is performed on the fusion of the
primary and secondary cue in a minimal model of SSL. A proof is provided that
determines the specific conditions under which it is favorable to perform
fusion. In short, it is favorable when (i) the prior on the target value is
strong or (ii) the secondary cue is sufficiently accurate. The theoretical
findings are validated with computational experiments. Subsequently, a
real-world case study is performed to investigate if fusion in SSL is also
beneficial when assumptions of the minimal model are not met. In particular, a
flying robot learns to map pressure measurements to sonar height measurements
and then fuses the two, resulting in better height estimation. Fusion is also
beneficial in the opposite case, when pressure is the primary cue. The analysis
and results are encouraging to study SSL fusion also for other robots and
sensors
Investigating the Physicochemical Property Changes of Plastic Packaging Exposed to UV Irradiation and Different Aqueous Environments
A wide range of weathering processes contributes to the degradation of plastic litter items which leads to the formation of microplastics that may be detrimental to marine ecosystems and the organisms inhabiting them. In this study, the impact of UV exposure on the degradation of clear polypropylene (CPP), black polypropylene (BPP), and polyethylene terephthalate (PET) packaging materials was investigated over a period of 6 weeks under dry air conditions representing the terrestrial environment. The exposure was conducted using differently sized and shaped samples at irradiation intensities of 65 W/m2 and 130 W/m2. Results indicated that UV irradiation led to changes in the properties of PET, BPP, and CPP that were proportional to the intensity delivered, leading to a higher level of mass loss, carbonyl indices, crystallinities, and microhardness in all polymer types at 130 W/m2 relative to 65 W/m2. However, material shape and size did not have a significant influence on any property for any of the test materials. Increased mass loss over time was accompanied by considerable increases in carbonyl index (CI) for both PPs. Clear PP (CPP) underwent the most severe degradation, resulting in the highest mass loss, increase in crystallinity, and CI. BPP was less degraded and modified by the UV irradiation than the CPP, indicating that the colorant, carbon black, provided some degree of protection to the bulk polymer material. PET was the least degraded of the three materials, suggesting this polymer type is more resistant to UV degradation. The differences in the degradation behaviours of the three test materials under dry environmental conditions indicate that the UV exposure history of plastic litter might play an important role in its potential for further degradation once it reaches the marine environment. Furthermore, analysis of samples exposed to UV in aqueous media reveals a more irregular set of trends for most material properties measured. Overall, the degree of degradation resulting from UV irradiation in dry environments was more pronounced than in aqueous environments, although the most significant property changes were observed for materials without previous UV exposure histories. Samples with previous UV histories showed higher resistance to further crystallinity changes, which appeared to be due to crosslinking in the pretreatment exposures inhibiting chain alignment into crystalline structures. The effect of solution medium was insignificant, although the presence of water allowed hydrolytic degradation to proceed simultaneously with UV degradation for PET. The reduction of CI in pretreated materials in the aqueous exposures, combined with the mass loss, suggest that the degraded surface layer erodes or products dissolve into surrounding solution medium, leaving a fresh surface of plastic exposed.publishedVersio
Biotransformation in water and soil of nitrosamines and nitramines potentially generated from amine-based CO2 capture technology
Nitrosamines (NSAs) and nitramines (NAs) are identified as possible degradation products from amine-based post-combustion CO2-capture (PCCC). Selected NSAs and NAs were subjected to aerobic and anaerobic biodegradation studies. In a screening study with 20 μg/L NSAs and NAs at 20 °C, only NSAs and NAs containing hydroxyl groups (alkanol compounds) exhibited aerobic biotransformation >10% after incubation in 28 days. Extending the biodegradation period to 56 days resulted in ≥80% biotransformation of the examined alkanol NSAs and NAs at 20 °C. Biotransformation (20 °C; 56 days) of the NSA NDELA at different concentrations (1–100 μg/L) did not differ significantly, but both water sources and temperatures affected biotransformation of the tested compounds. Anaerobic biotransformation (20 °C; 56 days) occurred rapidly  with alkanol NSAs and NAs, but not with alkyl compounds. Interestingly, 1st order rate coefficients and half-lives indicated comparable or even faster anaerobic than aerobic biotransformation at the same temperature. Predictions of biotransformation pathways suggested that the -OH substituent of alkanol NSAs and NAs was more susceptible to degradation than nitroso- and nitro-substituents.Biotransformation in water and soil of nitrosamines and nitramines potentially generated from amine-based CO2 capture technologyacceptedVersio
Preliminary Studies into the Environmental Fate of Nitrosamine and Nitramine Compounds in Aquatic Systems
AbstractPreliminary hydrolysis and photolysis data are presented for a suite of nitramines and nitrosamines relevant to post combustion CO2 capture using monoethanolamine solvent. Two nitramines (DMNA and MEA-NO2) and the nitrosamine NDELA were resistant to hydrolytic degradation at pH 4, 7 and 9. The nitrosamine NPz was hydrolytically stable at pH 4 and 9, but exhibited ∼30% degradation at pH 7. Nitrosamines appear highly susceptible to photolytic degradation, while nitramines are photolytically stable. The data form part of an ongoing study investigating the fate of nitrosamines and nitramines in terrestrial and aquatic environments
Chemical composition and ecotoxicity of plastic and car tire rubber leachates to aquatic organisms
Abstract Synthetic polymer-based materials are ubiquitous in aquatic environments, where weathering processes lead to their progressive fragmentation and the leaching of additive chemicals. The current study assessed the chemical content of freshwater and marine leachates produced from car tire rubber (CTR), polypropylene (PP), polyethylene terephthalate (PET), polystyrene (PS) and polyvinyl chloride (PVC) microplastics, and their adverse effects on the microalgae Raphidocelis subcapitata (freshwater) and Skeletonema costatum (marine) and the Mediterranean mussel Mytilus galloprovincialis. A combination of non-target and target chemical analysis revealed a number of organic and metal compounds in the leachates, including representing plasticizers, antioxidants, antimicrobials, lubricants, and vulcanizers. CTR and PVC materials and their corresponding leachates had the highest content of tentatively identified organic additives, while PET had the lowest. The metal content varied both between polymer leachates and between freshwater and seawater. Notable additives identified in high concentrations were benzothiazole (CTR), phthalide (PVC), acetophenone (PP), cobalt (CTR, PET), zinc (CTR, PVC), lead (PP) and antimony (PET). All leachates, except PET, inhibited algal growth with EC50 values ranging from 0.5% (CTR) and 64% (PP) of the total leachate concentration. Leachates also affected mussel endpoints, including the lysosomal membrane stability and early stages endpoints as gamete fertilization, embryonic development and larvae motility and survival. Embryonic development was the most sensitive parameter in mussels, with EC50 values ranging from 0.8% (CTR) to 65% (PET) of the total leachate. The lowest impacts were induced on D-shell larvae survival, reflecting their ability to down-regulate motility and filtration in the presence of chemical stressors. This study provides evidence of the relationship between chemical composition and toxicity of plastic/rubber leachates. Consistent with increasing contamination by organic and inorganic additives, the leachates ranged from slightly to highly toxic to mussels and algae, highlighting the need for a better understanding of the overall impact of plastic-associated chemicals on aquatic ecosystems
No observed developmental effects in early life stages of capelin (Mallotus villosus) exposed to a water-soluble fraction of crude oil during embryonic development
The rise in offshore oil and gas operations, maritime shipping, and tourism in northern latitudes
enhances the risk of oil spills to sub-Arctic and Arctic coastal environments. Therefore, there is
a need to understand the potential adverse effects of petroleum on key species in these areas.
Here, we investigated the effects of oil exposure on the early life stages of capelin (Mallotus
villosus), an ecologically and commercially important Barents Sea forage fish species that spawns
along the coast of Northern Norway. Capelin embryos were exposed to five different concentrations (corresponding to 0.5–19 µg/L total PAHs) of water-soluble fraction (WSF) of crude oil from 6
days post fertilization (dpf) until hatch (25 dpf), and development of larvae in clean seawater was
monitored until 52 dpf. None of the investigated endpoints (embryo development, larval length,
heart rate, arrhythmia, and larval mortality) showed any effects. Our results suggest that the early
life stages of capelin may be more robust to crude oil exposure than similar life stages of other fish
species
Organic chemicals associated with rubber are more toxic to marine algae and bacteria than those of thermoplastics
The current study investigated the chemical complexity of fifty plastic (36) and elastomer/rubber (14) methanol extracts from consumer products, focusing on the association with toxicity in two screening assays (bacteria luminescence and marine microalgae). The chemical composition varied considerably between the products and polymers. The most complex sample (car tire rubber) contained 2456 chemical features and the least complex (disposable water bottle) only 39 features, with a median of 386 features across all products. Individual extract toxicity also varied significantly across the products and polymers, with the two toxicity assays showing comparable results in terms of defining low and high toxicity extracts, and correlation between medium toxicity extracts. Chemical complexity and abundance both correlated with toxicity in both assays. However, there were strong differences in toxicity between plastic and elastomer extracts. Overall, 86–93 % of the 14 elastomer extracts and only 33–36 % of other polymer extracts (n = 36) were more toxic than the median. A range of compounds were tentatively identified across the sample set, with several concerning compounds being identified, mostly in the elastomers. While the current focus on plastic chemicals is towards thermoplastics, we show that elastomers may be of more concern from an environmental and human health perspective.publishedVersio
Accumulation and toxicity of monoaromatic petroleum hydrocarbons in early life stages of cod and haddock
A multitude of recent studies have documented the detrimental effects of crude oil exposure on early life stages of fish, including larvae and embryos. While polycyclic aromatic hydrocarbons (PAHs), particularly alkyl PAHs, are often considered the main cause of observed toxic effects, other crude oil derived organic compounds are usually overlooked. In the current study, comprehensive two-dimensional gas chromatography coupled to mass spectrometry was applied to investigate the body burden of a wide range of petrogenic compounds in Atlantic haddock (Melanogrammus aeglefinus) and cod (Gadus morhua) embryos that had been exposed to sublethal doses of dispersed crude oil. Several groups of alkylated monoaromatic compounds (e.g. alkyl tetralins, indanes and alkyl benzenes), as well as highly alkylated PAHs, were found to accumulate in the fish embryos upon crude oil exposure. To investigate the toxicity of the monoaromatic compounds, two models (1-isopropyl-4-methyltetralin and 1-isopropyl-4-methylindane) were synthesized and shown to bioaccumulate and cause delayed hatching in developing embryos. Minor developmental effects, including craniofacial and jaw deformations and pericardial edemas, were also observed at the highest studied concentrations of the alkylindane.acceptedVersio
Embryonic exposure to produced water can cause cardiac toxicity and deformations in Atlantic cod (Gadus morhua) and haddock (Melanogrammus aeglefinus) larvae
Regular discharges of produced water from the oil and gas industry represents the largest direct discharge of effluent into the marine environment worldwide. Organic compound classes typically reported in produced water include saturated hydrocarbons, monoaromatic and polyaromatic hydrocarbons (MAHs, PAHs) as well as oxygenated compounds, such as phenols, acids and ketones. This forms a cocktail of known and suspect toxicants, but limited knowledge is yet available on the sub-lethal toxicity of produced water to cold-water marine fish species. In the present work, we conducted a 4-day exposure of embryos of Atlantic cod (Gadus morhua) and haddock (Melanogrammus aeglefinus) to produced water extracts equivalent to 1:50, 1:500 and 1:5000 times dilutions of raw effluent. No significant reduction in survival or hatching success was observed, however, for cod, hatching was initiated earlier for exposed embryos in a concentration-dependent manner. During recovery, significantly reduced embryonic heart rate was observed for both species. After hatch, larvae subjected to embryonic exposure to produced water extracts were smaller, and displayed signs of cardiotoxicity, jaw and craniofacial deformations. In order to improve risk assessment and regulation of produced water discharges, it is important to identify which produced water components contribute to these effects.acceptedVersio
Atlantic cod (Gadus morhua) embryos are highly sensitive to short-term 3,4-dichloroaniline exposure
3,4-dichloroaniline (3,4-DCA) is one of the most widely produced anilines world-wide, used in plastic packaging, fabrics, pharmaceuticals, pesticides, dyes and paints as well as being a degradation product of several pesticides. 3,4-DCA has been detected in freshwater, brackish and marine environments. Although freshwater toxicity thresholds exist, very little toxicological information is available on marine and cold-water species. In this study, we exposed Atlantic cod (Gadus morhua) embryos (3–7 days post fertilization) to 3,4-DCA concentrations ranging from 8−747 μg/L for 4 days followed by a recovery period in clean sea water until 14 days post fertilization (dpf). The cod embryos were significantly more sensitive to acute 3,4-DCA exposure compared to other species tested and reported in the literature. At the highest concentration (747 μg/L), no embryos survived until hatch, and even at the lowest concentration (8 μg/L), a small, but significant increase in mortality was observed at 14 dpf. Delayed and concentration-dependent effects on surviving yolk-sac larvae, manifested as cardiac, developmental and morphometric alterations, more than a week after exposure suggest potential long-term effects of transient embryonic exposure to low concentrations of 3,4-DCA.publishedVersio
- …