Iron single crystal growth from a lithium-rich melt

\alpha-Fe single crystals of rhombic dodecahedral habit were grown from a melt of Li$_{84}$N$_{12}$Fe$_{\sim 3}$. Crystals of several millimeter along a side form at temperatures around $T \approx 800^\circ$C. Upon further cooling the growth competes with the formation of Fe-doped Li$_3$N. The b.c.c. structure and good sample quality of \alpha-Fe single crystals were confirmed by X-ray and electron diffraction as well as magnetization measurements and chemical analysis. A nitrogen concentration of 90\,ppm was detected by means of carrier gas hot extraction. Scanning electron microscopy did not reveal any sign of iron nitride precipitates.Comment: 13 pages, 4 figure

Stabilization of the ζ-Cu10Sn3 Phase by Ni at Soldering-Relevant Temperatures

A current issue in electrical engineering is the enhancement of the quality of solder joints. This is mainly associated with the ongoing electrification of transportation as well as the miniaturization of (power) electronics. For the reliability of solder joints, intermetallic phases in the microstructure of the solder are of great importance. The formation of the intermetallic phases in the Cu-Sn solder system was investigated for different annealing temperatures between 472 K and 623 K using pure Cu as well as Cu-1at.%Ni and Cu-3at.%Ni substrate materials. These are relevant for lead frame materials in electronic components. The Cu and Cu-Ni alloys were in contact to galvanic plated Sn. This work is focused on the unexpected formation of the hexagonal ζ-(Cu,Ni)10Sn3 phase at annealing temperatures of 523–623 K, which is far below the eutectoid decomposition temperature of binary ζ-Cu10Sn3 of about 855 K. By using scanning electron microscopy, energy dispersive X-ray spectroscopy, electron backscatter diffraction and X-ray diffraction the presence of the ζ phase was confirmed and its structural properties were analyzed

Relaxation Methods for Mixed-Integer Optimal Control of Partial Differential Equations

We consider integer-restricted optimal control of systems governed by abstract semilinear evolution equations. This includes the problem of optimal control design for certain distributed parameter systems endowed with multiple actuators, where the task is to minimize costs associated with the dynamics of the system by choosing, for each instant in time, one of the actuators together with ordinary controls. We consider relaxation techniques that are already used successfully for mixed-integer optimal control of ordinary differential equations. Our analysis yields sufficient conditions such that the optimal value and the optimal state of the relaxed problem can be approximated with arbitrary precision by a control satisfying the integer restrictions. The results are obtained by semigroup theory methods. The approach is constructive and gives rise to a numerical method. We supplement the analysis with numerical experiments

Chemical bath deposition of textured and compact zinc oxide thin films on vinyl-terminated polystyrene brushes

In this study we investigated the influence of an organic polystyrene brush on the deposition of ZnO thin films under moderate conditions. On a non-modified SiOx surface, island growth is observed, whereas the polymer brush induces homogeneous film growth. A chemical modification of the polystyrene brushes during the mineralization process occurs, which enables stronger interaction between the then polar template and polar ZnO crystallites in solution. This may lead to oriented attachment of the crystallites so that the observed (002) texture arises. Characterization of the templates and the resulting ZnO films were performed with ζ-potential and contact angle measurements as well as scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD). Infrared spectroscopy (IR) measurements were used to investigate the polystyrene brushes before and after modification

Annealing-Dependent Magnetic Depth Profile in Ga[1-x]Mn[x]As

We have studied the depth-dependent magnetic and structural properties of as-grown and optimally annealed Ga[1-x]Mn[x]As films using polarized neutron reflectometry. In addition to increasing total magnetization, the annealing process was observed to produce a significantly more homogeneous distribution of the magnetization. This difference in the films is attributed to the redistribution of Mn at interstitial sites during the annealing process. Also, we have seen evidence of significant magnetization depletion at the surface of both as-grown and annealed films.Comment: 5 pages, 3 figure

Synthesis of Alkaline Earth Diazenides MAEN2 (MAE = Ca, Sr, Ba) by Controlled Thermal Decomposition of Azides under High Pressure

The alkaline earth diazenides MAEN2 with MAE = Ca, Sr and Ba were synthesized by a novel synthetic approach, namely, a controlled decomposition of the corresponding azides in a multianvil press at highpressure/ high-temperature conditions. The crystal structure of hitherto unknown calcium diazenide (space group I4/mmm (no. 139), a = 3.5747(6) Å, c = 5.9844(9) Å, Z = 2, wRp = 0.078) was solved and refined on the basis of powder X-ray diffraction data as well as that of SrN2 and BaN2. Accordingly, CaN2 is isotypic with SrN2 (space group I4/mmm (no. 139), a = 3.8054(2) Å, c = 6.8961(4) Å, Z = 2, wRp = 0.057) and the corresponding alkaline earth acetylenides (MAEC2) crystallizing in a tetragonally distorted NaCl structure type. In accordance with literature data, BaN2 adopts a more distorted structure in space group C2/c (no. 15) with a = 7.1608(4) Å, b = 4.3776(3) Å, c = 7.2188(4) Å, β = 104.9679(33)°, Z = 4 and wRp = 0.049). The N−N bond lengths of 1.202(4) Å in CaN2 (SrN2 1.239(4) Å, BaN2 1.23(2) Å) correspond well with a double-bonded dinitrogen unit confirming a diazenide ion [N2]2−. Temperature-dependent in situ powder X-ray diffractometry of the three alkaline earth diazenides resulted in formation of the corresponding subnitrides MAE2N (MAE = Ca, Sr, Ba) at higher temperatures. FTIR spectroscopy revealed a band at about 1380 cm−1 assigned to the N−N stretching vibration of the diazenide unit. Electronic structure calculations support the metallic character of alkaline earth diazenides

Interactional justice at work is related to sickness absence: a study using repeated measures in the Swedish working population

Background: Research has shown that perceived unfairness contributes to higher rates of sickness absence. While shorter, but more frequent periods of sickness absence might be a possibility for the individual to get relief from high strain, long-term sickness absence might be a sign of more serious health problems. The Uncertainty Management Model suggests that justice is particularly important in times of uncertainty, e.g. perceived job insecurity. The present study investigated the association between interpersonal and informational justice at work with long and frequent sickness absence respectively, under conditions of job insecurity. Methods: Data were derived from the 2010, 2012, and 2014 biennial waves of the Swedish Longitudinal Occupational Survey of Health (SLOSH). The final analytic sample consisted of 19,493 individuals. We applied repeated measures regression analyses through generalized estimating equations (GEE), a method for longitudinal data that simultaneously analyses variables at different time points. We calculated risk of long and frequent sickness absence, respectively in relation to interpersonal and informational justice taking perceptions of job insecurity into account. Results: We found informational and interpersonal justice to be associated with risk of long and frequent sickness absence independently of job insecurity and demographic variables. Results from autoregressive GEE provided some support for a causal relationship between justice perceptions and sickness absence. Contrary to expectations, we found no interaction between justice and job insecurity. Conclusions: Our results underline the need for fair and just treatment of employees irrespective of perceived job insecurity in order to keep the workforce healthy and to minimize lost work days due to sickness absence

Branch-and-lift algorithm for deterministic global optimization in nonlinear optimal control

This paper presents a branch-and-lift algorithm for solving optimal control problems with smooth nonlinear dynamics and potentially nonconvex objective and constraint functionals to guaranteed global optimality. This algorithm features a direct sequential method and builds upon a generic, spatial branch-and-bound algorithm. A new operation, called lifting, is introduced, which refines the control parameterization via a Gram-Schmidt orthogonalization process, while simultaneously eliminating control subregions that are either infeasible or that provably cannot contain any global optima. Conditions are given under which the image of the control parameterization error in the state space contracts exponentially as the parameterization order is increased, thereby making the lifting operation efficient. A computational technique based on ellipsoidal calculus is also developed that satisfies these conditions. The practical applicability of branch-and-lift is illustrated in a numerical example. © 2013 Springer Science+Business Media New York

Long working hours and risk of 50 health conditions and mortality outcomes: a multicohort study in four European countries

Background: Studies on the association between long working hours and health have captured only a narrow range of outcomes (mainly cardiometabolic diseases and depression) and no outcome-wide studies on this topic are available. To achieve wider scope of potential harm, we examined long working hours as a risk factor for a wide range of disease and mortality endpoints. / Methods: The data of this multicohort study were from two population cohorts from Finland (primary analysis, n=59 599) and nine cohorts (replication analysis, n=44 262) from Sweden, Denmark, and the UK, all part of the Individual-participant Meta-analysis in Working Populations (IPD-Work) consortium. Baseline-assessed long working hours (≥55 hours per week) were compared to standard working hours (35-40 h). Outcome measures with follow-up until age 65 years were 46 diseases that required hospital treatment or continuous pharmacotherapy, all-cause, and three cause-specific mortality endpoints, ascertained via linkage to national health and mortality registers. / Findings: 2747 (4·6%) participants in the primary cohorts and 3027 (6·8%) in the replication cohorts worked long hours. After adjustment for age, sex, and socioeconomic status, working long hours was associated with increased risk of cardiovascular death (hazard ratio 1·68; 95% confidence interval 1·08-2·61 in primary analysis and 1·52; 0·90-2·58 in replication analysis), infections (1·37; 1·13-1·67 and 1·45; 1·13-1·87), diabetes (1·18; 1·01-1·38 and 1·41; 0·98-2·02), injuries (1·22; 1·00-1·50 and 1·18; 0·98-1·18) and musculoskeletal disorders (1·15; 1·06-1·26 and 1·13; 1·00-1·27). Working long hours was not associated with all-cause mortality. / Interpretation: Follow-up of 50 health outcomes in four European countries suggests that working long hours is associated with an elevated risk of early cardiovascular death and hospital-treated infections before age 65. Associations, albeit weak, were also observed with diabetes, musculoskeletal disorders and injuries. In these data working long hours was not related to elevated overall mortality. Funding: NordForsk, the Medical Research Council, the National Institute on Aging, the Wellcome Trust, Academy of Finland, and Finnish Work Environment Fund