898 research outputs found
Stochastic Programming Approaches for the Placement of Gas Detectors in Process Facilities
The release of flammable and toxic chemicals in petrochemical facilities is a major concern when designing modern process safety systems. While the proper selection of the necessary types of gas detectors needed is important, appropriate placement of these detectors is required in order to have a well-functioning gas detection system. However, the uncertainty in leak locations, gas composition, process and weather conditions, and process geometries must all be considered when attempting to determine the appropriate number and placement of the gas detectors. Because traditional approaches are typically based on heuristics, there exists the need to develop more rigorous optimization based approaches to handling this problem. This work presents several mixed-integer programming formulations to address this need.
First, a general mixed-integer linear programming problem is presented. This formulation takes advantage of precomputed computational fluid dynamics (CFD) simulations to determine a gas detector placement that minimizes the expected detection time across all scenarios. An extension to this formulation is added that considers the overall coverage in a facility in order to improve the detector placement when enough scenarios may not be available. Additionally, a formulation considering the Conditional-Value-at-Risk is also presented. This formulation provides some control over the shape of the tail of the distribution, not only minimizing the expected detection time across all scenarios, but also improving the tail behavior.
In addition to improved formulations, procedures are introduced to determine confidence in the placement generated and to determine if enough scenarios have been used in determining the gas detector placement. First, a procedure is introduced to analyze the performance of the proposed gas detector placement in the face of âunforeseenâ scenarios, or scenarios that were not necessarily included in the original formulation. Additionally, a procedure for determine the confidence interval on the optimality gap between a placement generated with a sample of scenarios and its estimated performance on the entire uncertainty space. Finally, a method for determining if enough scenarios have been used and how much additional benefit is expected by adding more scenarios to the optimization is proposed.
Results are presented for each of the formulations and methods presented using three data sets from an actual process facility. The use of an off-the-shelf toolkit for the placement of detectors in municipal water networks from the EPA, known as TEVA-SPOT, is explored. Because this toolkit was not designed for placing gas detectors, some adaptation of the files is necessary, and the procedure for doing so is presented
Non-Gaussian and non-homogeneous Poisson models of snapping shrimp noise
The problem of sonar detection and underwater communication in the presence of impulsive snapping shrimp noise is considered. Non-Gaussian amplitude and nonhomogeneous Poisson temporal statistical models of shrimp noise are investigated from the perspective of a single hydrophone immersed in shallow waters. New statistical models of the noise are devised and used to both challenge the superiority of existing models, and to provide alternative insights into the underlying physical processes.A heuristic amplitude statistical model of snapping shrimp noise is derived from first principles and compared with the Symmetric-α-stable model. The models are shown to have similar variability through the body of the amplitude probability density functions of real shrimp noise, however the new model is shown to have a superior fit to the extreme tails. Narrow-band detection using locally optimum detectors derived from these models show that the Symmetric-α-stable detector retains it's superiority, despite providing a poorer overall fit to the amplitude probability density functions. The results also confirm the superiority of the Symmetric-α-stable detector for detection of narrowband signals in shrimp noise from Australian waters.The temporal nature of snapping from a field of shrimp is investigated by considering the snapping as a point process in time. Point process analysis techniques are drawn from the fields of optics, neuro-physics, molecular biology, finance and computer science, and applied to the problem of snapping shrimp noise. It is concluded that the snapping is not consistent with a homogeneous Poisson process and that correlations exist in the point process on three different time scales. The cause of short time correlations is identified as surface reflected replicas, and models of medium time correlations are investigated. It is shown that a Cox-Ingersoll-Ross driven doubly-stochastic Poisson model is able to describe the medium time correlations observed from the counting process, but a k[superscript]th-order interval analysis reveals that there is more information contained within the snapping than can be described by the model. Analysis of shrimp snap times over a full day provides evidence of correlation between snap events on long time scales. Simulation of ocean noise is conducted to illustrate the use of such temporal models, and implications for their use in detection algorithms are discussed
Advanced composite aileron for L-1011 transport aircraft: Aileron manufacture
The fabrication activities of the Advanced Composite Aileron (ACA) program are discussed. These activities included detail fabrication, manufacturing development, assembly, repair and quality assurance. Five ship sets of ailerons were manufactured. The detail fabrication effort of ribs, spar and covers was accomplished on male tools to a common cure cycle. Graphite epoxy tape and fabric and syntactic epoxy materials were utilized in the fabrication. The ribs and spar were net cured and required no post cure trim. Material inconsistencies resulted in manufacturing development of the front spar during the production effort. The assembly effort was accomplished in subassembly and assembly fixtures. The manual drilling system utilized a dagger type drill in a hydraulic feed control hand drill. Coupon testing for each detail was done
Acute lung injury in paediatric intensive care: course and outcome
Introduction: Acute lung injury (ALI) and acute respiratory distress syndrome (ARDS) carry a high morbidity and mortality (10-90%). ALI is characterised by non-cardiogenic pulmonary oedema and refractory hypoxaemia of multifactorial aetiology [1]. There is limited data about outcome particularly in children. Methods This retrospective cohort study of 85 randomly selected patients with respiratory failure recruited from a prospectively collected database represents 7.1% of 1187 admissions. They include those treated with High Frequency Oscillation Ventilation (HFOV). The patients were admitted between 1 November 1998 and 31 October 2000. Results: Of the 85, 49 developed acute lung injury and 47 had ARDS. There were 26 males and 23 females with a median age and weight of 7.7 months (range 1 day-12.8 years) and 8 kg (range 0.8-40 kg). There were 7 deaths giving a crude mortality of 14.3%, all of which fulfilled the Consensus I [1] criteria for ARDS. Pulmonary occlusion pressures were not routinely measured. The A-a gradient and PaO2/FiO2 ratio (median + [95% CI]) were 37.46 [31.82-43.1] kPa and 19.12 [15.26-22.98] kPa respectively. The non-survivors had a significantly lower PaO2/FiO2 ratio (13 [6.07-19.93] kPa) compared to survivors (23.85 [19.57-28.13] kPa) (P = 0.03) and had a higher A-a gradient (51.05 [35.68-66.42] kPa) compared to survivors (36.07 [30.2-41.94]) kPa though not significant (P = 0.06). Twenty-nine patients (59.2%) were oscillated (Sensormedics 3100A) including all 7 non-survivors. There was no difference in ventilation requirements for CMV prior to oscillation. Seventeen of the 49 (34.7%) were treated with Nitric Oxide including 5 out of 7 non-survivors (71.4%). The median (95% CI) number of failed organs was 3 (1.96-4.04) for non-survivors compared to 1 (0.62-1.62) for survivors (P = 0.03). There were 27 patients with isolated respiratory failure all of whom survived. Six (85.7%) of the non-survivors also required cardiovascular support.Conclusion: A crude mortality of 14.3% compares favourably to published data. The A-a gradient and PaO2/FiO2 ratio may be of help in morbidity scoring in paediatric ARDS. Use of Nitric Oxide and HFOV is associated with increased mortality, which probably relates to the severity of disease. Multiple organ failure particularly respiratory and cardiac disease is associated with increased mortality. ARDS with isolated respiratory failure carries a good prognosis in children
Recommended from our members
The effect of competition on the control of invading plant pathogens
1. New invading pathogen strains must compete with endemic pathogen strains to emerge and spread. As disease control measures are often non-specific, i.e. they do not distinguish between strains, applying control not only affects the invading pathogen strain but the endemic as well. We hypothesise that the control of the invasive strain could be compromised due to the non-specific nature of the control.
2. A spatially-explicit model, describing the East African cassava mosaic virus-Uganda strain (EACMV-UG) outbreak, is used to evaluate methods of controlling both disease incidence and spread of invading pathogen strains in pathosystems with and without an endemic pathogen strain present.
3. We find that while many newly introduced or intensified control measures (such as resistant cultivars or roguing) decrease the expected incidence, they have the unintended consequence of increasing, or at least not reducing, the speed with which the invasive pathogen spreads geographically. We identify which controls cause this effect and methods in which these controls may be applied to prevent it.
4. We found that the spatial spread of the invading strain is chiefly governed by the incidence at the wave front. Control can therefore be applied, or intensified, once the wave front has passed without increasing the pathogenâs rate of spread.
5. When trade of planting material occurs, it is possible that the planting material is already infected. The only forms of control in this study that reduces the speed of geographic spread, regardless of the presence of an endemic strain, are those that reduce the amount of trade and the distance over which trade takes place.
6. Synthesis and applications. Imposing trade restrictions before the epidemic has reached a given area and increasing other control methods only once the wave front has passed is the most effective way of both slowing down spread and controlling incidence when the presence of an endemic strain is unknow
Oxygen, sulfur, and carbon chemisorbed on iron using angle resolved photoemission
Issued as Annual report, and Final report, Project no. G-41-67
Eurasian jays (Garrulus glandarius) conceal caches from onlookers.
Animals that cache food risk having their stored food pilfered by conspecifics. Previous research has shown that a number of food-caching species of corvid use strategies that decrease the probability of conspecifics pilfering their caches. In this experiment, we investigated whether Eurasian jays (Garrulus glandarius) would choose between caching behind an opaque and caching behind a transparent barrier whilst being observed by a conspecific. If caching in out-of-sight locations is a strategy to prevent conspecifics from pilfering these caches, then the jays should place a greater proportion of caches behind the opaque barrier when being observed than when caching in private. In accordance with this prediction, jays cached a greater proportion of food behind the opaque barrier when they were observed than when they cached in private. These results suggest that Eurasian jays may opt to cache in out-of-view locations to reduce the likelihood of conspecifics pilfering their caches
The structure of atomic nitrogen adsorbed on Fe(100)
Nitrogen atoms adsorbed on a Fe(100) surface cause the formation of an ordered c(2 Ă 2) overlayer with coverage 0.5. A structure analysis was performed by comparing experimental LEED IâV spectra with the results of multiple scattering model calculations. The N atoms were found to occupy fourfold hollow sites, with their plane 0.27 Ă
above the plane of the surface Fe atoms. In addition, nitrogen adsorption causes an expansion of the two topmost Fe layers by 10% (= 0.14 Ă
). The minimum r-factor for this structure analysis is about 0.2 for a total of 16 beams. The resulting atomic arrangement is similar to that in the (002) plane of bulk Fe4N, thus supporting the view of a âsurface nitrideâ and providing a consistent picture of the structural and bonding properties of this surface phase
- âŠ