14 research outputs found
Pseudoaneurysm and Intramuscular Haematoma after Dynamic Hip Screw Fixation for Intertrochanteric Femoral Fracture: A Case Report
Pseudo-anévrisme de la branche interne de l’artère fémorale profonde après vissage d’une fracture proximale du fémur
Ordinary injury, big surprise – Traumatic false aneurysm and arteriovenous fistula of the posterior tibial artery after civilian trauma: A case report
The efficacy of rotational control designs in promoting torsional stability of hip fracture fixation
This is the final version of the article. Available from the publisher via the DOI in this record.OBJECTIVES: Fractures of the proximal femur are a common clinical problem, and a number of orthopaedic devices are available for the treatment of such fractures. The objective of this study was to assess the rotational stability, a common failure predictor, of three different rotational control design philosophies: a screw, a helical blade and a deployable crucifix. METHODS: Devices were compared in terms of the mechanical work (W) required to rotate the implant by 6° in a bone substitute material. The substitute material used was Sawbones polyurethane foam of three different densities (0.08 g/cm(3), 0.16 g/cm(3) and 0.24 g/cm(3)). Each torsion test comprised a steady ramp of 1°/minute up to an angular displacement of 10°. RESULTS: The deployable crucifix design (X-Bolt), was more torsionally stable, compared to both the dynamic hip screw (DHS, p = 0.008) and helical blade (DHS Blade, p= 0.008) designs in bone substitute material representative of osteoporotic bone (0.16 g/cm(3) polyurethane foam). In 0.08 g/cm(3) density substrate, the crucifix design (X-Bolt) had a higher resistance to torsion than the screw (DHS, p = 0.008). There were no significant differences (p = 0.101) between the implants in 0.24 g/cm(3) density bone substitute. CONCLUSIONS: Our findings indicate that the clinical standard proximal fracture fixator design, the screw (DHS), was the least effective at resisting torsional load, and a novel crucifix design (X-Bolt), was the most effective design in resisting torsional load in bone substitute material with density representative of osteoporotic bone. At other densities the torsional stability was also higher for the X-Bolt, although not consistently significant by statistical analysis.Cite this article: J. D. Gosiewski, T. P. Holsgrove, H. S. Gill. The efficacy of rotational control designs in promoting torsional stability of hip fracture fixation. Bone Joint Res 2017;6:270-276. DOI: 10.1302/2046-3758.65.BJR-2017-0287.R1