1,330 research outputs found
Converting NAD83 GPS heights into NAVD88 elevations with LVGEOID, a hybrid geoid height model for the Long Valley volcanic region, California
A GPS survey of leveling benchmarks done in Long
Valley Caldera in 1999 showed that the application of the
National Geodetic Survey (NGS) geoid model GEOID99 to
tie GPS heights to historical leveling measurements would
significantly underestimate the caldera ground deformation (known from other geodetic measurements). The NGS
geoid model was able to correctly reproduce the shape of the
deformation, but required a local adjustment to give a realistic estimate of the magnitude of the uplift. In summer 2006,
the U.S. Geological Survey conducted a new leveling survey
along two major routes crossing the Long Valley region from
north to south (Hwy 395) and from east to west (Hwy 203 –
Benton Crossing). At the same time, 25 leveling bench marks
were occupied with dual frequency GPS receivers to provide a
measurement of the ellipsoid heights. Using the heights from
these two surveys, we were able to compute a precise geoid
height model (LVGEOID) for the Long Valley volcanic region.
Our results show that although the LVGEOID and the latest
NGS GEOID03 model practically coincide in areas outside
the caldera, there is a difference of up to 0.2 m between the
two models within the caldera. Accounting for this difference
is critical when using the geoid height model to estimate the
ground deformation due to magmatic or tectonic activity in the
calder
Post-Dissolution Cohabitation of Alimony Recipients: A Legal Fact of Life
In a November, 1983 article published in the Florida Bar Journal, I discussed the issue of continued alimony payments to a recipient cohabiting with a third party
Resonant state expansion applied to planar waveguides
The resonant state expansion, a recently developed method in electrodynamics,
is generalized here to planar open optical systems with non-normal incidence of
light. The method is illustrated and verified on exactly solvable examples,
such as a dielectric slab and a Bragg reflector microcavity, for which explicit
analytic formulas are developed. This comparison demonstrates the accuracy and
convergence of the method. Interestingly, the spectral analysis of a dielectric
slab in terms of resonant states reveals an influence of waveguide modes in the
transmission. These modes, which on resonance do not couple to external light,
surprisingly do couple to external light for off-resonant excitation
Binding energy and dephasing of biexcitons in In0.18Ga0.82As/GaAs single quantum wells
Biexciton binding energies and biexciton dephasing in In0.18Ga0.82As/GaAs single quantum wells have been measured by time-integrated and spectrally resolved four-wave mixing. The biexciton binding energy increases from 1.5 to 2.6 meV for well widths increasing from 1 to 4 nm. The ratio between exciton and biexciton binding energy changes from 0.23 to 0.3 with increasing inhomogeneous broadening, corresponding to increasing well width. From the temperature dependence of the exciton and biexciton four-wave mixing signal decay, we have deduced the acoustic-phonon scattering of the exciton-biexciton transition. It is found to be comparable to that of the exciton transition, indicating that the deformation potential interactions for the exciton and the exciton-biexciton transitions are comparable
Nonuniversality of the dispersion interaction: analytic benchmarks for van der Waals energy functionals
We highlight the non-universality of the asymptotic behavior of dispersion
forces, such that a sum of inverse sixth power contributions is often
inadequate. We analytically evaluate the cross-correlation energy Ec between
two pi-conjugated layers separated by a large distance D within the
electromagnetically non-retarded Random Phase Approximation, via a
tight-binding model. For two perfect semimetallic graphene sheets at T=0K we
find Ec = C D^{-3}, in contrast to the "insulating" D^{-4} dependence predicted
by currently accepted approximations. We also treat the case where one graphene
layer is replaced by a thin metal, a model relevant to the exfoliation of
graphite. Our general considerations also apply to nanotubes, nanowires and
layered metals.Comment: 4 pages, 0 fig
Coherence dynamics and quantum-to-classical crossover in an exciton-cavity system in the quantum strong coupling regime
Interaction between light and matter generates optical nonlinearities, which are particularly pronounced in the quantum strong coupling regime. When a single bosonic mode couples to a single fermionic mode, a Jaynes-Cummings (JC) ladder is formed, which we realize here using cavity photons and quantum dot excitons. We measure and model the coherent anharmonic response of this strongly coupled exciton-cavity system at resonance. Injecting two photons into the cavity, we demonstrate a root 2 larger polariton splitting with respect to the vacuum Rabi splitting. This is achieved using coherent nonlinear spectroscopy, specifically four-wave mixing, where the coherence between the ground state and the first (second) rung of the JC ladder can be interrogated for positive (negative) delays. With increasing excitation intensity and thus rising average number of injected photons, we observe spectral signatures of the quantum-to-classical crossover of the strong coupling regime.Peer reviewe
Critical Velocities in Open Capillary Flow
This paper describes the proposed research program on open capillary flow and the preliminary work performed theoretically and in drop tower experiments. The work focuses on the fundamental physical understanding of the flow through capillary bound geometries, where the circumference of the cross section of the flow path contains free surfaces. Examples for such a flow configuration are capillary vanes in surface tension tanks, flow along edges and corners and flow through liquid bridges. The geometries may be classified by their cross section areas, wetted circumferences and the radii of curvature of the free surfaces. In the streaming float zone the flow path is bound by a free surface only. The ribbon vane is a model for vane types used in surface tension tanks, where a structure in proximity to the tank wall forms a capillary gap. A groove is used in heat pipes for the transportation of the condensed working fluid to the heat source and a wedge may occur in a spaceborne experiment where fluid has to be transported by the means of surface tension. The research objectives are the determination of the maximum volume flux, the observation of the free surfaces and the liquid flow inside the flow path as well as the evaluation of the limiting capillary wave speed. The restriction of the maximum volume flux is due to convective forces (flow velocity exceeding the capillary wave speed) and/or viscous forces, i.e. the viscous head loss along the flow path must be compensated by the capillary pressure due to the curved free surface. Exceeding the maximum volume flux leads to the choking of the flow path, thus the free surface collapses and.gas ingestion occurs at the outlet. The means are ground-based experimental work with plateau tanks and in a drop tower, a sounding rocket flight, and theoretical analysis with integral balances as well as full three dimensional CFD solutions for flow with free surfaces
One-dimensional dynamics of nearly unstable axisymmetric liquid bridges
A general one-dimensional model is considered that describes the dynamics of slender, axisymmetric, noncylindrical liquid bridges between two equal disks. Such model depends on two adjustable parameters and includes as particular cases the standard Lee and Cosserat models. For slender liquid bridges, the model provides sufficiently accurate results and involves much easier and faster calculations than the full three-dimensional model. In particular, viscous effects are easily accounted for. The one-dimensional model is used to derive a simple weakly nonlinear description of the dynamics near the instability limit. Small perturbations of marginal instability conditions are also considered that account for volume perturbations, nonequality of the supporting disks, and axial gravity. The analysis shows that the dynamics breaks the reflection symmetry on the midplane between the supporting disks. The weakly nonlinear evolution of the amplitude of the perturbation is given by a Duffing equation, whose coefficients are calculated in terms of the slenderness as a part of the analysis and exhibit a weak dependence on the adjustable parameters of the one-dimensional model. The amplitude equation is used to make quantitative predictions of both the (first stage of) breakage for unstable configurations and the (slow) dynamics for stable configurations
Microcavity controlled coupling of excitonic qubits
Controlled non-local energy and coherence transfer enables light harvesting
in photosynthesis and non-local logical operations in quantum computing. The
most relevant mechanism of coherent coupling of distant qubits is coupling via
the electromagnetic field. Here, we demonstrate the controlled coherent
coupling of spatially separated excitonic qubits via the photon mode of a solid
state microresonator. This is revealed by two-dimensional spectroscopy of the
sample's coherent response, a sensitive and selective probe of the coherent
coupling. The experimental results are quantitatively described by a rigorous
theory of the cavity mediated coupling within a cluster of quantum dots
excitons. Having demonstrated this mechanism, it can be used in extended
coupling channels - sculptured, for instance, in photonic crystal cavities - to
enable a long-range, non-local wiring up of individual emitters in solids
- …