The Responsiveness of Casino Revenue to the Casino Tax Rate

This paper uses variation in Illinois casino taxes to estimate the elasticity of casino adjusted gross receipts (AGR) with respect to the marginal casino tax rate. Illinois’ shift to a graduated rate schedule initiated increases in the highest marginal tax rate on AGR from 20% to 70% with reversion to a 50% rate. We construct a state-level casino tax rate variable based on the effective marginal rates on AGR at individual casinos, imputing the tax on casino admissions as a proportion of adjusted gross receipts. We find that a 1% increase in this casino tax rate decreases AGR by 0.2%

Laser Line Scan Characterization of Geometric Profiles in Laser Metal Deposition

Laser Metal Deposition (LMD) is an additive manufacturing process in which material is deposited by blowing powdered metal into a melt pool formed by a laser beam. When fabricating parts, the substrate is subjected to motion control such that the melt pool traces a prescribed path to form each part layer. Advantages of LMD include relatively efficient powder usage, the ability to create functionally-graded parts and the ability to repair high-value parts. The process, however, is sensitive to variations in process parameters and a need for feedback measurements and closed-loop control has been recognized in the literature [1, 2]. To this end, a laser line scanner is being integrated into an LMD system at the Missouri University of Science and Technology. Measurements from the laser line scanner will provide the feedback data necessary for closed-loop control of the process. The work presented here considers characteristics of the laser line scanner as it relates to scanning LMD depositions. Errors associated with the measurement device are described along with digital processing operations designed to remove them. The parameter bead height is extracted from scans for future use in a closed-loop control strategy

Association of tumour necrosis factor alpha and its receptors with thymidine phosphorylase expression in invasive breast carcinoma.

Angiogenesis is an essential requirement for tumour growth and metastasis and is regulated by a complex network of factors produced by both stromal cells and neoplastic cells within solid tumours. The cytokine tumour necrosis factor alpha (TNF-alpha) and the enzyme thymidine phosphorylase (TP) are two factors known to promote tumour angiogenesis. We have demonstrated recently that high numbers of tumour-associated macrophages (TAMs) are significantly associated with increased tumour angiogenesis and poor prognosis in invasive carcinoma of the breast. We have also shown that TAMs are a major source of TNF-alpha in invasive breast carcinomas, and that macrophage-like stromal cells as well as tumour cells synthesize TP in such tumours. However, little is known of the factors that regulate the production or activity of these factors in the tumour microenvironment. As TNF-alpha has been shown to up-regulate TP expression in tumour cells in vitro we performed an immunohistochemical study to investigate the possibility that TNF-alpha may be involved in the regulation of TP expression by malignant breast epithelial cells in vivo. To do this, we used a cocktail of non-neutralizing monoclonal anti-TNF-alpha antibodies to visualize both TNF-alpha-expressing macrophages and TNF-alpha bound to its receptors on tumour cells and endothelial cells in a series of 93 invasive carcinomas of the breast. A semiquantitative grading system was then used to compare these staining patterns with that for TP in the same biopsies. TNF-alpha immunoreactivity was also compared with various important tumour variables known to relate to outcome in this disease (microvessel density, node status, grade, stage, receptor status and macrophage infiltration), as well as relapse-free and overall survival data for these patients. Our data show significant positive correlations between TNF-alpha bound to its receptors on tumour cells and: (1) TP protein production by tumour cells, and (2) axillary lymph node status (i.e. metastasis). These results suggest that tumour cell responsiveness to TNF-alpha produced by neighbouring TAMs may play a part in the regulation of TP expression by tumour cells as well as their metastatic behaviour. This may explain, in part, the relationship between increased macrophage infiltration and angiogenesis in breast cancer, and further supports the contention that TAMs may represent an important target for future anti-angiogenic therapies

The effect of Co and Zn addition on densification and electrical properties of ceria-based nanopowders

CNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOCAPES - COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIORIn this work, cobalt and zinc-doped Ce0.8Gd0.2O1.9 samples were prepared starting from a commercial nanopowder and compared to the undoped material. The powder samples were pressed and afterwards sintered by a two-step procedure, before characterization by X-Ray Diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Impedance Spectroscopy (IS) in air. Cobalt or zinc additions are effective as sintering aid, allowing peak sintering temperatures around 1000 degrees C to reach densifications above of 93% of theoretical density, showing no evidence for the presence of secondary phases. The total conductivity at 800 degrees C of pressed Zn-doped samples (6.7x10(-2) S/cm) and Co-doped samples (7.5x10(-2) S/cm) is similar for undoped samples (7.2x10(-2) S/cm) showing that Zn and Co has a positive effect on densification without compromising the electrical conductivity.In this work, cobalt and zinc-doped Ce0.8Gd0.2O1.9 samples were prepared starting from a commercial nanopowder and compared to the undoped material. The powder samples were pressed and afterwards sintered by a two-step procedure, before characterization by X-Ray Diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Impedance Spectroscopy (IS) in air. Cobalt or zinc additions are effective as sintering aid, allowing peak sintering temperatures around 1000 degrees C to reach densifications above of 93% of theoretical density, showing no evidence for the presence of secondary phases. The total conductivity at 800 degrees C of pressed Zn-doped samples (6.7x10(-2) S/cm) and Co-doped samples (7.5x10(-2) S/cm) is similar for undoped samples (7.2x10(-2) S/cm) showing that Zn and Co has a positive effect on densification without compromising the electrical conductivity.19510571063CNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOCAPES - COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIORCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOCAPES - COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIORSem informaçãoSem informaçãoFinancial supports from CAPES and CNPq are greatly appreciated. We would like to thank Rita C. G. Vinhas (State University of Campinas, Campinas Campus, Brazil), for helping with the XPS measurements

Solid Freeform Fabrication of Transparent Fused Quartz using a Filament Fed Process

Glass is a critical material for many scientific and engineering applications including optics, communications, electronics, and hermetic seals. Despite this technological relevance, there has been minimal research toward Additive Manufacturing (AM) of glass, particularly optically transparent glass. Additive Manufacturing of transparent glass offers potential advantages for lower processing costs for small production volumes, increased design freedom, and the ability to locally vary the optical properties of the part. Compared to common soda lime glass, fused quartz is better for AM since it has lower thermal expansion and higher index homogeneity. This paper presents a study of additive manufacturing of transparent fused quartz by a filament fed process. A CW CO2 laser (10.6 µm) is used to melt glass filaments layer by layer. The laser couples to phononic modes in the glass and is well absorbed. The beam and melt pool are stationary while the work piece is scanned using a standard lab motion system. Representative parts are built to explore the effects of variable laser power on the properties of printed fused quartz. During printing the incandescent emission from the melt pool is measured using a spectrometer. This permits process monitoring and identifies potential chemical changes in the glass during printing. After deposition, the printed parts are polished and the transmission measured to calculate the absorption/scattering coefficient. Finally, a low-order thermal analysis is presented and correlated to experimental results, including an energy balance and finite volume analysis using Fluent. These results suggest that optical quality fused quartz parts with low absorption and high index of refraction uniformity may be printed using the filament-fed process

The DRIFT Dark Matter Experiments

The current status of the DRIFT (Directional Recoil Identification From Tracks) experiment at Boulby Mine is presented, including the latest limits on the WIMP spin-dependent cross-section from 1.5 kg days of running with a mixture of CS2 and CF4. Planned upgrades to DRIFT IId are detailed, along with ongoing work towards DRIFT III, which aims to be the world's first 10 m3-scale directional Dark Matter detector.Comment: Proceedings of the 3rd International conference on Directional Detection of Dark Matter (CYGNUS 2011), Aussois, France, 8-10 June 201