223 research outputs found
Biomechanical comparison of a new stand-alone anterior lumbar interbody fusion cage with established fixation techniques – a three-dimensional finite element analysis
<p>Abstract</p> <p>Background</p> <p>Initial promise of a stand-alone interbody fusion cage to treat chronic back pain and restore disc height has not been realized. In some instances, a posterior spinal fixation has been used to enhance stability and increase fusion rate. In this manuscript, a new stand-alone cage is compared with conventional fixation methods based on the finite element analysis, with a focus on investigating cage-bone interface mechanics and stress distribution on the adjacent tissues.</p> <p>Methods</p> <p>Three trapezoid 8° interbody fusion cage models (dual paralleled cages, a single large cage, or a two-part cage consisting of a trapezoid box and threaded cylinder) were created with or without pedicle screws fixation to investigate the relative importance of the screws on the spinal segmental response. The contact stress on the facet joint, slip displacement of the cage on the endplate, and rotational angle of the upper vertebra were measured under different loading conditions.</p> <p>Results</p> <p>Simulation results demonstrated less facet stress and slip displacement with the maximal contact on the cage-bone interface. A stand-alone two-part cage had good slip behavior under compression, flexion, extension, lateral bending and torsion, as compared with the other two interbody cages, even with the additional posterior fixation. However, the two-part cage had the lowest rotational angles under flexion and torsion, but had no differences under extension and lateral bending.</p> <p>Conclusion</p> <p>The biomechanical benefit of a stand-alone two-part fusion cage can be justified. This device provided the stability required for interbody fusion, which supports clinical trials of the cage as an alternative to circumferential fixations.</p
Longitudinal double-spin asymmetry and cross section for inclusive neutral pion production at midrapidity in polarized proton collisions at sqrt(s) = 200 GeV
We report a measurement of the longitudinal double-spin asymmetry A_LL and
the differential cross section for inclusive Pi0 production at midrapidity in
polarized proton collisions at sqrt(s) = 200 GeV. The cross section was
measured over a transverse momentum range of 1 < p_T < 17 GeV/c and found to be
in good agreement with a next-to-leading order perturbative QCD calculation.
The longitudinal double-spin asymmetry was measured in the range of 3.7 < p_T <
11 GeV/c and excludes a maximal positive gluon polarization in the proton. The
mean transverse momentum fraction of Pi0's in their parent jets was found to be
around 0.7 for electromagnetically triggered events.Comment: 6 pages, 3 figures, submitted to Phys. Rev. D (RC
Partonic flow and -meson production in Au+Au collisions at = 200 GeV
We present first measurements of the -meson elliptic flow
() and high statistics distributions for different
centralities from = 200 GeV Au+Au collisions at RHIC. In
minimum bias collisions the of the meson is consistent with the
trend observed for mesons. The ratio of the yields of the to those of
the as a function of transverse momentum is consistent with a model
based on the recombination of thermal quarks up to GeV/,
but disagrees at higher momenta. The nuclear modification factor () of
follows the trend observed in the mesons rather than in
baryons, supporting baryon-meson scaling. Since -mesons are
made via coalescence of seemingly thermalized quarks in central Au+Au
collisions, the observations imply hot and dense matter with partonic
collectivity has been formed at RHIC.Comment: 6 pages, 4 figures, submit to PR
High non-photonic electron production in + collisions at = 200 GeV
We present the measurement of non-photonic electron production at high
transverse momentum ( 2.5 GeV/) in + collisions at
= 200 GeV using data recorded during 2005 and 2008 by the STAR
experiment at the Relativistic Heavy Ion Collider (RHIC). The measured
cross-sections from the two runs are consistent with each other despite a large
difference in photonic background levels due to different detector
configurations. We compare the measured non-photonic electron cross-sections
with previously published RHIC data and pQCD calculations. Using the relative
contributions of B and D mesons to non-photonic electrons, we determine the
integrated cross sections of electrons () at 3 GeV/10 GeV/ from bottom and charm meson decays to be = 4.0({\rm
stat.})({\rm syst.}) nb and =
6.2({\rm stat.})({\rm syst.}) nb, respectively.Comment: 17 pages, 17 figure
Evolution of the differential transverse momentum correlation function with centrality in Au+Au collisions at GeV
We present first measurements of the evolution of the differential transverse
momentum correlation function, {\it C}, with collision centrality in Au+Au
interactions at GeV. {\it C} exhibits a strong dependence
on collision centrality that is qualitatively similar to that of number
correlations previously reported. We use the observed longitudinal broadening
of the near-side peak of {\it C} with increasing centrality to estimate the
ratio of the shear viscosity to entropy density, , of the matter formed
in central Au+Au interactions. We obtain an upper limit estimate of
that suggests that the produced medium has a small viscosity per unit entropy.Comment: 7 pages, 4 figures, STAR paper published in Phys. Lett.
Measurements of Dihadron Correlations Relative to the Event Plane in Au+Au Collisions at GeV
Dihadron azimuthal correlations containing a high transverse momentum (\pt)
trigger particle are sensitive to the properties of the nuclear medium created
at RHIC through the strong interactions occurring between the traversing parton
and the medium, i.e. jet-quenching. Previous measurements revealed a strong
modification to dihadron azimuthal correlations in Au+Au collisions with
respect to \pp\ and \dAu\ collisions. The modification increases with the
collision centrality, suggesting a path-length dependence to the jet-quenching
effect. This paper reports STAR measurements of dihadron azimuthal correlations
in mid-central (20-60\%) Au+Au collisions at \snn=200~GeV as a function of
the trigger particle's azimuthal angle relative to the event plane,
\phis=|\phit-\psiEP|. The azimuthal correlation is studied as a function of
both the trigger and associated particle \pt. The subtractions of the
combinatorial background and anisotropic flow, assuming Zero Yield At Minimum
(\zyam), are described. The away-side correlation is strongly modified, and the
modification varies with \phis, which is expected to be related to the
path-length that the away-side parton traverses. The pseudo-rapidity (\deta)
dependence of the near-side correlation, sensitive to long range \deta
correlations (the ridge), is also investigated. The ridge and jet-like
components of the near-side correlation are studied as a function of \phis.
The ridge appears to drop with increasing \phis while the jet-like component
remains approximately constant. ...Comment: 50 pages, 39 figures, 6 table
Measurement of Transverse Single-Spin Asymmetries for Di-Jet Production in Proton-Proton Collisions at GeV
We report the first measurement of the opening angle distribution between
pairs of jets produced in high-energy collisions of transversely polarized
protons. The measurement probes (Sivers) correlations between the transverse
spin orientation of a proton and the transverse momentum directions of its
partons. With both beams polarized, the wide pseudorapidity () coverage for jets permits separation of Sivers functions for the valence
and sea regions. The resulting asymmetries are all consistent with zero and
considerably smaller than Sivers effects observed in semi-inclusive deep
inelastic scattering (SIDIS). We discuss theoretical attempts to reconcile the
new results with the sizable transverse spin effects seen in SIDIS and forward
hadron production in pp collisions.Comment: 6 pages total, 1 Latex file, 3 PS files with figure
System size and energy dependence of near-side di-hadron correlations
Two-particle azimuthal () and pseudorapidity ()
correlations using a trigger particle with large transverse momentum () in
+Au, Cu+Cu and Au+Au collisions at =\xspace 62.4 GeV and
200~GeV from the STAR experiment at RHIC are presented. The \ns correlation is
separated into a jet-like component, narrow in both and
, and the ridge, narrow in but broad in .
Both components are studied as a function of collision centrality, and the
jet-like correlation is studied as a function of the trigger and associated
. The behavior of the jet-like component is remarkably consistent for
different collision systems, suggesting it is produced by fragmentation. The
width of the jet-like correlation is found to increase with the system size.
The ridge, previously observed in Au+Au collisions at = 200
GeV, is also found in Cu+Cu collisions and in collisions at
=\xspace 62.4 GeV, but is found to be substantially smaller at
=\xspace 62.4 GeV than at = 200 GeV for the
same average number of participants ().
Measurements of the ridge are compared to models.Comment: 17 pages, 14 figures, submitted to Phys. Rev.
Longitudinal Spin Transfer to and Hyperons in Polarized Proton-Proton Collisions at = 200 GeV
The longitudinal spin transfer, , from high energy polarized protons
to and hyperons has been measured for the first time
in proton-proton collisions at with the STAR
detector at RHIC. The measurements cover pseudorapidity, , in the range
and transverse momenta, , up to . The longitudinal spin transfer is found to be for inclusive
and for
inclusive hyperons with and . The dependence on and is presented.Comment: 5 pages, 4 figure
Longitudinal scaling property of the charge balance function in Au + Au collisions at 200 GeV
We present measurements of the charge balance function, from the charged
particles, for diverse pseudorapidity and transverse momentum ranges in Au + Au
collisions at 200 GeV using the STAR detector at RHIC. We observe that the
balance function is boost-invariant within the pseudorapidity coverage [-1.3,
1.3]. The balance function properly scaled by the width of the observed
pseudorapidity window does not depend on the position or size of the
pseudorapidity window. This scaling property also holds for particles in
different transverse momentum ranges. In addition, we find that the width of
the balance function decreases monotonically with increasing transverse
momentum for all centrality classes.Comment: 6 pages, 3 figure
- …