Investigation of laser ablated ZnO thin films grown with Zn metal target: a structural study

High quality ZnO thin films were gown using the pulsed laser deposition technique on (0001) Al$_2$O$_3$ substrates in an oxidizing atmosphere, using a Zn metallic target. We varied the growth conditions such as the deposition temperature and the oxygen pressure. First, using a battery of techniques such as x-rays diffraction, Rutherford Backscattering spectroscopy and atomic force microscopy, we evaluated the structural quality, the stress and the degree of epitaxy of the films. Second, the relations between the deposition conditions and the structural properties, that are directly related to the nature of the thin films, are discussed qualitatively. Finally, a number of issues on how to get good-quality ZnO films are addressed.Comment: To be published in Jour. Appl. Phys. (15 August 2004

Tailoring magnetic anisotropy in epitaxial half metallic La0.7Sr0.3MnO3 thin films

We present a detailed study on the magnetic properties, including anisotropy, reversal fields, and magnetization reversal processes, of well characterized half-metallic epitaxial La0.7Sr0.3MnO3 (LSMO) thin films grown onto SrTiO3 (STO) substrates with three different surface orientations, i.e. (001), (110) and (1-18). The latter shows step edges oriented parallel to the [110] (in-plane) crystallographic direction. Room temperature high resolution vectorial Kerr magnetometry measurements have been performed at different applied magnetic field directions in the whole angular range. In general, the magnetic properties of the LSMO films can be interpreted with just the uniaxial term with the anisotropy axis given by the film morphology, whereas the strength of this anisotropy depends on both structure and film thickness. In particular, LSMO films grown on nominally flat (110)-oriented STO substrates presents a well defined uniaxial anisotropy originated from the existence of elongated in-plane [001]-oriented structures, whereas LSMO films grown on nominally flat (001)-oriented STO substrates show a weak uniaxial magnetic anisotropy with the easy axis direction aligned parallel to residual substrate step edges. Elongated structures are also found for LSMO films grown on vicinal STO(001) substrates. These films present a well-defined uniaxial magnetic anisotropy with the easy axis lying along the step edges and its strength increases with the LSMO thickness. It is remarkable that this step-induced uniaxial anisotropy has been found for LSMO films up to 120 nm thickness. Our results are promising for engineering novel half-metallic magnetic devices that exploit tailored magnetic anisotropy.Comment: 10 pages, 10 figures, 1 tabl

Modulated optical reflectance measurements on La2/3Sr1/3MnO3 thin films

The modulated optical reflectance (MOR) measurement technique was applied to colossal magnetoresistive materials, in particular, La2/3Sr1/3MnO3 (LSMO) thin films. The contactless measurement scheme is prospective for many applications spanning from materials characterization to new devices like reading heads for magnetically recorded media. A contrasted room temperature surface scan of a 100 microns wide 400 microns long bridge patterned into LSMO film provided preliminary information about the film homogeneity. Then the temperature was varied between 240 and 400 K, i.e. through the ferromagnetic to paramagnetic transition. A clear relation between the MOR signal measured as function of the temperature and the relative derivative of the resistivity up to the Curie temperature was observed. This relationship is fundamental for the MOR technique and its mechanism was explored in the particular case of LSMO. Analysis in the framework of the Drude model showed that, within certain conditions, the measured MOR signal changes are correlated to changes in the charge carrier concentration.Comment: 29 pages, accepted for publication in J. Appl. Phy

Impact of a Community Pharmacist-Delivered Information Program on the Follow-up of Type-2 Diabetic Patients: A Cluster Randomized Controlled Study.

Low-quality communication between patients and care providers and limited patient knowledge of the disease and the therapy are important factors associated with poor glycemic control in patients with type 2 diabetes. We conducted a multicenter study to determine whether structured and tailored information delivered by pharmacists to type 2 diabetic patients could improve patient treatment adherence, hemoglobin A1c (HbA1c) levels and knowledge about diabetes. One hundred seventy-four pharmacies were randomized to deliver an educational program on diet, drug treatment, disease and complications during three 30-min interviews over a 6-month period, or to provide no intervention, to type 2 diabetic patients treated with oral antidiabetic agents. Medication adherence was assessed by measuring the medication possession ratio and diabetes control by collecting HbA1c values. Levels of patient treatment self-management and disease knowledge were assessed using self-questionnaires. Three hundred seventy-seven patients were analyzed. The medication possession ratio, already very high at baseline in the intervention (94.8%) and control (92.3%) groups, did not vary significantly after 6 months with no difference between the two groups. Significant decreases in HbA1c were observed in both groups at 6 months (p < 0.001) and 12 months (p < 0.01), with significantly greater changes from baseline in the intervention group than in the control group at 6 months (- 0.5% vs. - 0.2%, p = 0.0047) and 12 months (- 0.6% vs. - 0.2%, p = 0.0057). Patients in the intervention group showed greater improvement in their ability to self-manage treatment (+ 4.86 vs. + 1.58, p = 0.0014) and in the extent of their knowledge about diabetes (+ 0.6 vs. + 0.2, p < 0.01) at 6 months versus baseline compared with the control group. Tailored information provided by the pharmacist to patients with type 2 diabetes did not significantly improve the already high adherence rates, but was associated with a significant decrease in HbA1c and an improvement of patient knowledge about diabetes. ISRCTN33776525. MSD France

Influence of pulsed laser deposition growth conditions on the thermoelectric properties of Ca3Co4O9 thin films

Thin films of the misfit cobaltite Ca3Co4O9 were grown on (0001)-oriented (c-cut) sapphire substrates, using the pulsed-laser deposition techniques. The dependence of the thermoelectric/transport properties on the film growth conditions was investigatedComment: To be published in J. Appl. Phy

Enhanced electrical and magnetic properties in La0.7Sr0.3MnO3 thin films deposited on CaTiO3-buffered silicon substrates

We investigate the suitability of an epitaxial CaTiO3 buffer layer deposited onto (100) Si by reactive molecular-beam epitaxy (MBE) for the epitaxial integration of the colossal magnetoresistive material La0.7Sr0.3MnO3 with silicon. The magnetic and electrical properties of La0.7Sr0.3MnO3 films deposited by MBE on CaTiO3-buffered silicon (CaTiO3/Si) are compared with those deposited on SrTiO3-buffered silicon (SrTiO3/Si). In addition to possessing a higher Curie temperature and a higher metal-to-insulator transition temperature, the electrical resistivity and 1/f noise level at 300 K are reduced by a factor of two in the heterostructure with the CaTiO3 buffer layer. These results are relevant to device applications of La0.7Sr0.3MnO3 thin films on silicon substrates