Group IV functionalization of low index waveguides

Low fabrication error sensitivity, integration density, channel scalability, low switching energy and low insertion loss are the major prerequisites for future on-chip WDM systems and interfacing with optical fibres. A number of device geometries have already been demonstrated that fulfil these criteria, at least in part, but combining all of the requirements is still a difficult challenge.Two contenders that could fulfil these criteria are the low loss nitride waveguiding platform and the high index group IV compounds for active photonic devices. Silicon Oxynitride (SiON) and Silicon Nitride (SiN) based waveguides are extremely powerful and central to today’s optical communications networks. The intermediate refractive index provides low footprint devices but eases the fabrication demands that can result in phase errors and repeatability problems in the all silicon approach. This enables multiplexers and demultiplexers with very low crosstalk and insertion loss and extremely low loss long range waveguides, making them very attractive for the optical backplanes and rack to rack links inside supercomputers and data centers. Group IV Photonics GeSi has a number of attractive optical characteristics for modulation, absorption and detection in a small volume area enabling low power and high density integration.Here, we propose and demonstrate a novel architecture consisting of the interfacing of a range of deposition method using low temperature PECVD and HWCVD nitride waveguides, Photonic crystal modulators [1] but also detectors [2] connected by a silicon nitride bus waveguide. The architecture features very high scalability due to the small size of the devices (~100 micrometre square) and the modulators operate with an AC energy consumption of less than 1fJ/bit

Locally erasable couplers for optical device testing in silicon on insulator

Wafer scale testing is critical to reducing production costs and increasing production yield. Here we report a method that allows testing of individual optical components within a complex optical integrated circuit. The method is based on diffractive grating couplers, fabricated using lattice damage induced by ion implantation of germanium. These gratings can be erased via localised laser annealing, which is shown to reduce the outcoupling efficiency by over 20 dB after the device testing is completed. Laser annealing was achieved by employing a CW laser, operating at visible wavelengths thus reducing equipment costs and allowing annealing through thick oxide claddings. The process used also retains CMOS compatibility

Functional kernel estimators of conditional extreme quantiles

We address the estimation of "extreme" conditional quantiles i.e. when their order converges to one as the sample size increases. Conditions on the rate of convergence of their order to one are provided to obtain asymptotically Gaussian distributed kernel estimators. A Weissman-type estimator and kernel estimators of the conditional tail-index are derived, permitting to estimate extreme conditional quantiles of arbitrary order.Comment: arXiv admin note: text overlap with arXiv:1107.226

Morphometric discrimination of two sympatric sibling species in the Palaearctic region, Culicoides obsoletus Meigen and C-scoticus Downes & Kettle (Diptera: Ceratopogonidae), vectors of bluetongue and Schmallenberg viruses

Background Some Palaearctic biting midge species (subgenus Avaritia) have been implicated as vectors of bluetongue virus in northern Europe. Separation of two species (C. obsoletus and C. scoticus) is considered difficult morphologically and, often, these female specimens are grouped in entomological studies. However, species-specific identification is desirable to understand their life history characteristics, assess their roles in disease transmission or measure their abundance during arboviral outbreaks. This study aims to investigate whether morphometric identification techniques can be applied to female C. obsoletus and C. scoticus individuals trapped at different geographical regions and time periods during the vector season. Methods C. obsoletus and C. scoticus were collected using light-suction traps from the UK, France and Spain, with two geographical locations sampled per country. A total of 759 C. obsoletus/C. scoticus individuals were identified using a molecular assay based on the cytochrome c oxidase subunit I gene. Fifteen morphometric measurements were taken from the head, wings and abdomen of slide-mounted specimens, and ratios calculated between these measurements. Multivariate analyses explored whether a combination of morphometric variables could lead to accurate species identification. Finally, Culicoides spp. collected in France at the start, middle and end of the adult vector season were compared, to determine whether seasonal variation exists in any of the morphometric measurements. Results The principal component analyses revealed that abdominal characteristics: length and width of the smaller and larger spermathecae, and the length of the chitinous plates and width between them, are the most reliable morphometric characteristics to differentiate between the species. Seasonal variation in the size of each species was observed for head and wing measurements, but not abdominal measurements. Geographical variation in the size of Culicoides spp. was also observed and is likely to be related to temperature at the trapping sites, with smaller individuals trapped at more southern latitudes. Conclusions Our results suggest that female C. obsoletus and C. scoticus individuals can be separated under a stereomicroscope using abdominal measurements. Although we show the length and width of the spermathecae can be used to differentiate between the species, this can be time-consuming, so we recommend undertaking this using standardized subsampling of catches. (Résumé d'auteur

Estimation of conditional laws given an extreme component

Let $(X,Y)$ be a bivariate random vector. The estimation of a probability of the form $P(Y\leq y \mid X >t)$ is challenging when $t$ is large, and a fruitful approach consists in studying, if it exists, the limiting conditional distribution of the random vector $(X,Y)$, suitably normalized, given that $X$ is large. There already exists a wide literature on bivariate models for which this limiting distribution exists. In this paper, a statistical analysis of this problem is done. Estimators of the limiting distribution (which is assumed to exist) and the normalizing functions are provided, as well as an estimator of the conditional quantile function when the conditioning event is extreme. Consistency of the estimators is proved and a functional central limit theorem for the estimator of the limiting distribution is obtained. The small sample behavior of the estimator of the conditional quantile function is illustrated through simulations.Comment: 32 pages, 5 figur

A monolithically integrated silicon modulator with a 10 Gb/s 5 V pp or 5.6 V pp driver in 0.25 μm SiGe:C BiCMOS

This paper presents as a novelty a fully monolithically integrated 10 Gb/s silicon modulator consisting of an electrical driver plus optical phase modulator in 0.25 μm SiGe:C BiCMOS technology on one chip, where instead of a SOI CMOS process (only MOS transistors) a SiGe BiCMOS process (MOS transistors and fast SiGe bipolar transistors) is implemented. The fastest bipolar transistors in the BiCMOS product line used have a transit frequency of f t ≈ 120 GHz and a collector-emitter breakdown voltage of BV CE0 = 2.2 V (IHP SG25H3). The main focus of this paper will be given to the electronic drivers, where two driver variants are implemented in the test chips. Circuit descriptions and simulations, which treat the influences of noise and bond wires, are presented. Measurements at separate test chips for the drivers show that the integrated driver variant one has a low power consumption in the range of 0.66 to 0.68 W but a high gain of S 21 = 37 dB. From the large signal point of view this driver delivers an inverted as well as a non-inverted output data signal between 0 and 2.5 V (5 V pp differential). Driver variant one is supplied with 2.5 V and with 3.5 V. Bit-error-ratio (BER) measurements resulted in a BER better than 10 −12 for voltage differences of the input data stream down to 50 mV pp . Driver variant two, which is an adapted version of driver variant one, is supplied with 2.5 and 4.2 V, consumes 0.83 to 0.87 W, delivers a differential data signal with 5.6 V pp at the output and has a gain of S 21 = 40 dB. The chip of the fully integrated modulator occupies an area of 12.3 mm 2 due to the photonic components. Measurements with a 240 mV pp electrical input data stream, 1.25 V input common-mode voltage and for an optical input wavelength of 1540 nm resulted in an extinction ratio of 3.3 dB for 1 mm long RF phase shifters in each modulator arm driven by driver variant one and a DC tuning voltage of 1.2 V. The extinction ratio was 8.4 dB at a DC tuning voltage of 7 V for a device with 2 mm long RF phase shifters in each arm and driver variant two