Lab Scale Fixed-Bed Reactor for Operando X-Ray Absorption Spectroscopy for Structure Activity Studies of Supported Metal Oxide Catalysts

Lab scale fixed-bed reactor is applied for operando transmission X-ray absorption spectroscopy (XAS) for structure-activity studies of supported metal oxide catalysts under real reaction conditions. This setup includes many properties of an optimal fixed-bed reactor for operando transmission XAS studies. For instance, it is usable in a wide range of temperature (up to 1,000°C), pressure and space velocity. Besides, this operando setup can be used for transmission XAS measurements in a wide edge energy range. The potential of this reactor for operando transmission XAS is demonstrated by, as examples, the three-way catalytic performance of Pd/Al2O3/CeZrO2 and Rh/Al2O

Synthesis and Characterization of New Ceramic Thermoelectrics Implemented in a Thermoelectric Oxide Module

Novel thermoelectric oxides were developed, produced, and characterized to demonstrate their promising thermoelectric conversion potential in a thermoelectric converter. Four-leg thermoelectric oxide modules were fabricated by combining p- and n-type oxide thermoelements made of pressed polycrystalline GdCo0.95Ni0.05O3 and CaMn0.98Nb0.02O3, respectively. In these modules, the p- and n-type thermoelements were connected electrically in series and thermally in parallel. The materials were joined by electrical contacts consisting of a Ag/CuO composite material. Fairly good thermal contacts were ensured by pressing the thermoelements between alumina substrates. Cross-sections of the alumina/Ag-CuO mixture/thermoelement interface were investigated by scanning electron microscopy. The temperature distribution across the module was monitored using K-type thermocouples and a micro-infrared (IR) camera. The open-circuit voltage and the load voltages of the module were measured up to a temperature difference of ΔT=500K while keeping the temperature of the cold side at 300K. The output power and internal resistance were calculated. The characteristics of the module evaluated from electrical measurements were compared with respective values of the p- and n-type leg materials. An output power of 0.04W at ΔT=500K led to a power density of ~0.125W/cm3, where the volume of thermoelectric material was determined by a cross-section of 4mm×4mm and a leg length of 5m

Could Public Restrooms Be an Environment for Bacterial Resistomes?

PMCID: PMC3547874This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited

Standardized volumetric 3D-analysis of SPECT/CT imaging in orthopaedics: overcoming the limitations of qualitative 2D analysis

<p>Abstract</p> <p>Background</p> <p>SPECT/CT combines high resolution anatomical 3D computerized tomography (CT) and single photon emission computerized tomography (SPECT) as functional imaging, which provides 3D information about biological processes into a single imaging modality. The clinical utility of SPECT/CT imaging has been recognized in a variety of medical fields and most recently in orthopaedics; however, clinical adoption has been limited due to shortcomings of analytical tools available. Specifically, SPECT analyses are mainly qualitative due to variation in overall metabolic uptake among patients. Furthermore, most analyses are done in 2D, although rich 3D data are available. Consequently, it is difficult to quantitatively compare the position, size, and intensity of SPECT uptake regions among patients, and therefore difficult to draw meaningful clinical conclusions.</p> <p>Methods</p> <p>We propose a method for normalizing orthopaedic SPECT/CT data that enables standardised 3D volumetric quantitative measurements and comparison among patients. Our method is based on 3D localisation using clinically relevant anatomical landmarks and frames of reference, along with intensity value normalisation using clinically relevant reference regions. Using the normalised data, we describe a thresholding technique to distinguish clinically relevant hot spots from background activity.</p> <p>Results</p> <p>Using an exemplar comparison of two patients, we demonstrate how the normalised, 3D-rendered data can provide a richer source of clinical information and allow quantitative comparison of SPECT/CT measurements across patients. Specifically, we demonstrate how non-normalized SPECT/CT analysis can lead to different clinical conclusions than the normalized SPECT/CT analysis, and that normalized quantitative analysis can be a more accurate indicator of pathology.</p> <p>Conclusions</p> <p>Conventional orthopaedic frames of reference, 3D volumetric data analysis and thresholding are used to distinguish clinically relevant hot spots from background activity. Our goal is to facilitate a standardised approach to quantitative data collection and comparison of clinical studies using SPECT/CT, enabling more widespread clinical use of this powerful imaging tool.</p

The AVuPUR project (Assessing the Vulnerabiliy of Peri-Urbans Rivers): experimental set up, modelling strategy and first results

International audienceLe projet AVuPUR a pour objectif de progresser sur la compréhension et la modélisation des flux d'eau dans les bassins versants péri-urbains. Il s'agit plus particulièrement de fournir des outils permettant de quantifier l'impact d'objets anthropiques tels que zones urbaines, routes, fossés sur les régimes hydrologiques des cours d'eau dans ces bassins. Cet article présente la stratégie expérimentale et de collecte de données mise en ½uvre dans le projet et les pistes proposées pour l'amélioration des outils de modélisation existants et le développement d'outils novateurs. Enfin, nous présentons comment ces outils seront utilisés pour simuler et quantifier l'impact des modifications d'occupation des sols et/ou du climat sur les régimes hydrologiques des bassins étudiés. / The aim of the AVuPUR project is to enhance our understanding and modelling capacity of water fluxes within suburban watersheds. In particular, the objective is to deliver tools allowing to quantify the impact of anthropogenic elements such as urban areas, roads, ditches on the hydrological regime of suburban rivers. This paper presents the observation and data collection strategy set up by the project, and the directions for improving existing modelling tools or proposing innovative ones. Finally, we present how these tools will be used to simulate and quantify the impact of land use and climate changes on the hydrological regimes of the studied catchments

Occurrence of genes of putative fibrinogen binding proteins and hemolysins, as well as of their phenotypic correlates in isolates of S. lugdunensis of different origins

<p>Abstract</p> <p>Background</p> <p><it>Staphylococcus lugdunensis </it>is an important human pathogen that causes potentially fatal endocarditis, osteomyelitis and skin and soft tissue infections similar to diseases caused by <it>Staphylococcus aureus</it>. Nevertheless, in contrast to <it>S. aureus</it>, data on pathogenicity factors of <it>S. lugdunensis </it>is scarce. Two adhesins, a fibrinogen and a von Willebrand factor binding protein, and a <it>S. lugdunensis </it>synergistic hemolysin (SLUSH) have been previously described. Moreover, the newly sequenced genome of <it>S. lugdunensis </it>revealed genes of other putative fibrinogen binding adhesins and hemolysins. The aim of this study was to gain more insight into the occurrence of genes likely coding for fibrinogen binding adhesins and hemolysins using clinical strains of <it>S. lugdunensis</it>.</p> <p>Findings</p> <p>Most of the putative adhesin genes and hemolysin genes investigated in this study were highly prevalent, except for the SLUSH gene cluster. In contrast to previous reports, binding to fibrinogen was detected in 29.3% of the <it>S. lugdunensis </it>strains. In most strains, hemolysis on blood agar plates was weak after 24 h and distinct after 48 h of incubation. The fibrinogen binding and hemolysis phenotypes were also independent of the type of clinical specimen, from which the isolates were obtained.</p> <p>Conclusion</p> <p>In this study we described a pyrrolidonyl arylamidase negative <it>S. lugdunensis </it>isolate. Our data indicate that a matrix-assisted laser desorption ionisation time-of-flight MS-based identification of <it>S. lugdunensis </it>or species-specific PCR's should be performed in favour of pyrrolidonyl arylamidase testing. In contrast to the high occurrence of putative fibrinogen binding protein genes, 29.3% of the <it>S. lugdunensis </it>strains bound to fibrinogen. Putative hemolysin genes were also prevalent in most of the <it>S. lugdunensis </it>strains, irrespective of their hemolysis activity on Columbia blood agar plates. Similar to a previous report, hemolysis after 48 h of incubation is also indicative for <it>S. lugdunensis</it>. The SLUSH gene cluster was detected in an estimated 50% of the strains, indicating that this locus is different or non-prevalent in many strains.</p

Credibility in Policy Expertise: The Function of Boundaries Between Research and Policy

As science becomes an increasingly crucial resource for addressing complex challenges in society, extensive demands are placed upon the researchers who produce it. Creating valuable expert knowledge that intervenes in policy or practice requires knowledge brokers to facilitate interactions at the boundary between research and policy. Yet, existing research lacks a compelling account of the ways in which brokerage is performed to gain credibility. Drawing on mixed-method analysis of twelve policy research settings, I outline a novel set of strategies for attaining symbolic power, whereby policy experts position themselves and others via conceptual distances drawn between the ‘world of ideas’ and the ‘world of policy and practice’. Disciplinary distance works to situate research as either disciplinary or undisciplinary, epistemic distance creates a boundary between complex specialist research and direct digestible outputs, temporal distance represents the separation of slow rigorous research and agile responsive analysis, and economic distance situates research as either pure and intrinsic or marketable and fundable. I develop a theoretical account that unpacks the boundaries between research communities and shows how these boundaries permit policy research actors to achieve various strategic aims.ESRC Future Research Leaders ES/N016319/1 Commonwealth Scholarship Commissio

From Food to Offspring Down: Tissue-Specific Discrimination and Turn-Over of Stable Isotopes in Herbivorous Waterbirds and Other Avian Foraging Guilds

Isotopic discrimination and turn-over are fundamental to the application of stable isotope ecology in animals. However, detailed information for specific tissues and species are widely lacking, notably for herbivorous species. We provide details on tissue-specific carbon and nitrogen discrimination and turn-over times from food to blood, feathers, claws, egg tissues and offspring down feathers in four species of herbivorous waterbirds. Source-to-tissue discrimination factors for carbon (δ13C) and nitrogen stable isotope ratios (δ15N) showed little variation across species but varied between tissues. Apparent discrimination factors ranged between −0.5 to 2.5‰ for δ13C and 2.8 to 5.2‰ for δ15N, and were more similar between blood components than between keratinous tissues or egg tissue. Comparing these results with published data from other species we found no effect of foraging guild on discrimination factors for carbon but a significant foraging-guild effect for nitrogen discrimination factors