Surface Grafting of Poly(L-glutamates). 3. Block Copolymerization

This paper describes for the first time the synthesis of surface-grafted AB-block copolypeptides, consisting of poly(γ-benzyl L-glutamate) (PBLG) as the A-block and poly(γ-methyl L-glutamate) (PMLG) as the B-block. Immobilized primary amine groups of (γ-aminopropyl)triethoxysilane (APS) on silicon wafers initiated the ring-opening polymerization of N-carboxyanhydrides of glutamic acid esters (NCAs). After removal of the BLG-NCA monomer solution after a certain reaction time, the amine end groups of the formed PBLG blocks acted as initiators for the second monomers. This method provides the possibility of making layered structures of surface-grafted block copolymers with tuned properties. Ellipsometry and small-angle X-ray reflection (SAXR) measurements revealed the thickness of the polypeptide layers ranging from 45-100 Å of the first block to 140-270 Å for the total block copolypeptides. The chemical composition of the blocks was determined by X-ray photoelectron spectroscopy (XPS). In addition, Fourier transform infrared transmission spectroscopy (FT-IR) revealed that the polypeptide main chains of both blocks consisted of pure R-helices. The average orientation of the helices ranging from 22-42° with respect to the substrate within the first block to 31-35° in the second block could be derived with FT-IR as well.

Reversible Charge Trapping in Bis-Carbazole-Diimide Redox Polymers with Complete Luminescence Quenching Enabling Nondestructive Read-Out by Resonance Raman Spectroscopy

The coupling of substituted carbazole compounds through carbon–carbon bond formation upon one-electron oxidation is shown to be a highly versatile approach to the formation of redox polymer films. Although the polymerization of single carbazole units has been proposed earlier, we show that by tethering pairs of carbazoles double sequential dimerization allows for facile formation of redox polymer films with fine control over film thickness. We show that the design of the monomers and in particular the bridging units is key to polymer formation, with the diaminobenzene motif proving advantageous, in terms of the matching to the redox potentials of the monomer and polymer film and thereby avoiding limitations in film thickness (autoinsulation), but introduces unacceptable instability due to the intrinsic redox activity of this moiety. The use of a diimide protecting group both avoids complications due to <i>p</i>-diamino-benzene redox chemistry and provides for a redox polymer in which the photoluminescence of the bis-carbazole moiety can be switched reversibly (on/off) with redox control. The monomer design approach is versatile enabling facile incorporation of additional functional units, such as naphthalene. Here we show that a multicomponent carbazole/naphthalene containing monomer (<b>APCNDI</b>) can form redox polymer films showing both p- and n- conductivity under ambient conditions and allows access to five distinct redox states, and a complex electrochromic response covering the whole of the UV/vis–NIR spectral region. The highly effective quenching of the photoluminescence of both components in poly-<b>APCNDI</b> enables detailed characterization of the redox polymer films. The poly-<b>APCNDI</b> films show extensive charge trapping, which can be read out spectroscopically in the case of films and is characterized as kinetic rather than chemical in origin on the basis of UV/vis–NIR absorption and resonance Raman spectroscopic analyses. The strong resonantly enhanced Raman scattering for the various oxidized and reduced states of <b>APCNDI</b> enables nondestructive “read-out” of the state of the polymer, including that in which charges are trapped kinetically at the surface, making poly-<b>APCNDI</b> highly suitable for application as a component in organic nonvolatile memory devices

Polypeptide-grafted macroporous polyHIPE by surface-initiated N-Carboxyanhydride (NCA) polymerization as a platform for bioconjugation

A new class of functional macroporous monoliths from polymerized high internal phase emulsion (polyHIPE) with tunable surface functional groups was developed by direct polypeptide surface grafting. In the first step, amino-functional polyHIPEs were obtained by the addition of 4-vinylbenzyl or 4-vinylbenzylphthalimide to the styrenic emulsion and thermal radical polymerization. The obtained monoliths present the expected open-cell morphology and a high surface area. The incorporated amino group was successfully utilized to initiate the ring-opening polymer- ization of benzyl-L-glutamate N-carboxyanhydride (BLG NCA) and benzyloxycarbonyl-L-lysine (Lys(Z)) NCA, which resulted in a dense homogeneous coating of polypeptides throughout the internal polyHIPE surfaces as confirmed by SEM and FTIR analysis. The amount of polypeptide grafted to the polyHIPE surfaces could be modulated by varying the initial ratio of amino acid NCA to amino-functional polyHIPE. Subsequent removal of the polypeptide protecting groups yielded highly functional polyHIPE-g-poly(glutamic acid) and polyHIPE-g- poly(lysine). Both types of polypeptide-grafted monoliths responded to pH by changes in their hydrohilicity. The possibility to use the high density of function (−COOH or −NH2) for secondary reaction was demonstrated by the successful bioconjugation of enhanced green fluorescent protein (eGFP) and fluorescein isocyanate (FITC) on the polymer 3D-scaffold surface. The amount of eGFP and FITC conjugated to the polypeptide-grafted polyHIPE was significantly higher than to the amino- functional polyHIPE, signifying the advantage of polypeptide grafting to achieve highly functional polyHIPEs

Diverse Applications of Nanomedicine

The design and use of materials in the nanoscale size range for addressing medical and health-related issues continues to receive increasing interest. Research in nanomedicine spans a multitude of areas, including drug delivery, vaccine development, antibacterial, diagnosis and imaging tools, wearable devices, implants, high-throughput screening platforms, etc. using biological, nonbiological, biomimetic, or hybrid materials. Many of these developments are starting to be translated into viable clinical products. Here, we provide an overview of recent developments in nanomedicine and highlight the current challenges and upcoming opportunities for the field and translation to the clinic. \ua9 2017 American Chemical Society

Supramolecular nesting of cyclic polymers

Advances in template-directed synthesis make it possible to create artificial molecules with protein-like dimensions, directly from simple components. These synthetic macromolecules have a proclivity for self-organization that is reminiscent of biopolymers. Here, we report the synthesis of monodisperse cyclic porphyrin polymers, with diameters of up to 21 nm (750 C–C bonds). The ratio of the intrinsic viscosities for cyclic and linear topologies is 0.72, indicating that these polymers behave as almost ideal flexible chains in solution. When deposited on ​gold surfaces, the cyclic polymers display a new mode of two-dimensional supramolecular organization, combining encapsulation and nesting; one nanoring adopts a near-circular conformation, thus allowing a second nanoring to be captured within its perimeter, in a tightly folded conformation. Scanning tunnelling microscopy reveals that nesting occurs in combination with stacking when nanorings are deposited under vacuum, whereas when they are deposited directly from solution under ambient conditions there is stacking or nesting, but not a combination of both