20 research outputs found
The Direct Control of the Multi-Leaf Collimator in the Inverse Problem of Radiotherapy Treatment Planning (Moniliuskakollimaattorin suora kontrolli sädehoidon annossuunnittelun käänteisongelmassa)
Estimates of the aerosol indirect effect over the Baltic Sea region derived from 12 years of MODIS observations
Retrieved from the Moderate Resolution Imaging Spectroradiometer (MODIS) on-board the Aqua satellite, 12 years (2003-2014) of aerosol and cloud properties were used to statistically quantify aerosol-cloud interaction (ACI) over the Baltic Sea region, including the relatively clean Fennoscandia and the more polluted central-eastern Europe. These areas allowed us to study the effects of different aerosol types and concentrations on macro-and microphysical properties of clouds: cloud effective radius (CER), cloud fraction (CF), cloud optical thickness (COT), cloud liquid water path (LWP) and cloud-top height (CTH). Aerosol properties used are aerosol optical depth (AOD), Angstrom exponent (AE) and aerosol index (AI). The study was limited to low-level water clouds in the summer. The vertical distributions of the relationships between cloud properties and aerosols show an effect of aerosols on low-level water clouds. CF, COT, LWP and CTH tend to increase with aerosol loading, indicating changes in the cloud structure, while the effective radius of cloud droplets decreases. The ACI is larger at relatively low cloud-top levels, between 900 and 700 hPa. Most of the studied cloud variables were unaffected by the lower-tropospheric stability (LTS), except for the cloud fraction. The spatial distribution of aerosol and cloud parameters and ACI, here defined as the change in CER as a function of aerosol concentration for a fixed LWP, shows positive and statistically significant ACI over the Baltic Sea and Fennoscandia, with the former having the largest values. Small negative ACI values are observed in central-eastern Europe, suggesting that large aerosol concentrations saturate the ACI.Peer reviewe
Post-processing to remove residual clouds from aerosol optical depth retrieved using the Advanced Along Track Scanning Radiometer
Cloud misclassification is a serious problem in the retrieval of aerosol optical depth (AOD), which might considerably bias the AOD results. On the one hand, residual cloud contamination leads to AOD overestimation, whereas the removal of high-AOD pixels (due to their misclassification as clouds) leads to underestimation. To remove cloudcontaminated areas in AOD retrieved from reflectances measured with the (Advanced) Along Track Scanning Radiometers (ATSR-2 and AATSR), using the ATSR dual-view algorithm (ADV) over land or the ATSR single-view algorithm (ASV) over ocean, a cloud post-processing (CPP) scheme has been developed at the Finnish Meteorological Institute (FMI) as described in Kolmonen et al. (2016). The application of this scheme results in the removal of cloudcontaminated areas, providing spatially smoother AOD maps and favourable comparison with AOD obtained from the ground-based reference measurements from the AERONET sun photometer network. However, closer inspection shows that the CPP also removes areas with elevated AOD not due to cloud contamination, as shown in this paper. We present an improved CPP scheme which better discriminates between cloud-free and cloud-contaminated areas. The CPP thresholds have been further evaluated and adjusted according to the findings. The thresholds for the detection of high-AOD regions (> 60% of the retrieved pixels should be high-AOD (> 0.6) pixels), and cloud contamination criteria for lowAOD regions have been accepted as the default for AOD global post-processing in the improved CPP. Retaining elevated AOD while effectively removing cloud-contaminated pixels affects the resulting global and regional mean AOD values as well as coverage. Effects of the CPP scheme on both spatial and temporal variation for the period 2002-2012 are discussed. With the improved CPP, the AOD coverage increases by 10-15% with respect to the existing scheme. The validation versus AERONET shows an improvement of the correlation coefficient from 0.84 to 0.86 for the global data set for the period 2002-2012. The global aggregated AOD over land for the period 2003-2011 is 0.163 with the improved CPP compared to 0.144 with the existing scheme. The aggregated AOD over ocean and globally (land and ocean together) is 0.164 with the improved CPP scheme (compared to 0.152 and 0.150 with the existing scheme, for ocean and globally respectively). Effects of the improved CPP scheme on the 10-year time series are illustrated and seasonal and temporal changes are discussed. The improved CPP method introduced here is applicable to other aerosol retrieval algorithms. However, the thresholds for detecting the high-AOD regions, which were developed for AATSR, might have to be adjusted to the actual features of the instruments.Peer reviewe
On the use of a satellite remote-sensing-based approach for determining aerosol direct radiative effect over land : a case study over China
Peer reviewe
Merging regional and global aerosol optical depth records from major available satellite products
Satellite instruments provide a vantage point for studying aerosol loading consistently over different regions of the world. However, the typical lifetime of a single satellite platform is on the order of 5-15 years; thus, for climate studies, the use of multiple satellite sensors should be considered. Discrepancies exist between aerosol optical depth (AOD) products due to differences in their information content, spatial and temporal sampling, calibration, cloud masking, and algorithmic assumptions. Users of satellite-based AOD time-series are confronted with the challenge of choosing an appropriate dataset for the intended application. In this study, 16 monthly AOD products obtained from different satellite sensors and with different algorithms were inter-compared and evaluated against Aerosol Robotic Network (AERONET) monthly AOD. Global and regional analyses indicate that products tend to agree qualitatively on the annual, seasonal and monthly timescales but may be offset in magnitude. Several approaches were then investigated to merge the AOD records from different satellites and create an optimised AOD dataset. With few exceptions, all merging approaches lead to similar results, indicating the robustness and stability of the merged AOD products. We introduce a gridded monthly AOD merged product for the period 1995-2017. We show that the quality of the merged product is as least as
good as that of individual products. Optimal agreement of the AOD merged product with AERONET further demonstrates the advantage of merging multiple products. This merged dataset provides a long-term perspective on AOD changes over different regions of the world, and users are encouraged to use this dataset
Evaluation of seven European aerosol optical depth retrieval algorithms for climate analysis
Satellite data are increasingly used to provide observation-based estimates of the effects of aerosols on climate. The Aerosol-cci project, part of the European Space Agency's Climate Change Initiative (CCI), was designed to provide essential climate variables for aerosols from satellite data. Eight algorithms, developed for the retrieval of aerosol properties using data from AATSR (4), MERIS (3) and POLDER, were evaluated to determine their suitability for climate studies. The primary result from each of these algorithms is the aerosol optical depth (AOD) at several wavelengths, together with the Ångström exponent (AE) which describes the spectral variation of the AOD for a given wavelength pair. Other aerosol parameters which are possibly retrieved from satellite observations are not considered in this paper. The AOD and AE (AE only for Level 2) were evaluated against independent collocated observations from the ground-based AERONET sun photometer network and against “reference” satellite data provided by MODIS and MISR. Tools used for the evaluation were developed for daily products as produced by the retrieval with a spatial resolution of 10 × 10 km2 (Level 2) and daily or monthly aggregates (Level 3). These tools include statistics for L2 and L3 products compared with AERONET, as well as scoring based on spatial and temporal correlations. In this paper we describe their use in a round robin (RR) evaluation of four months of data, one month for each season in 2008. The amount of data was restricted to only four months because of the large effort made to improve the algorithms, and to evaluate the improvement and current status, before larger data sets will be processed. Evaluation criteria are discussed. Results presented show the current status of the European aerosol algorithms in comparison to both AERONET and MODIS and MISR data. The comparison leads to a preliminary conclusion that the scores are similar, including those for the references, but the coverage of AATSR needs to be enhanced and further improvements are possible for most algorithms. None of the algorithms, including the references, outperforms all others everywhere. AATSR data can be used for the retrieval of AOD and AE over land and ocean. PARASOL and one of the MERIS algorithms have been evaluated over ocean only and both algorithms provide good results
Development, Production and Evaluation of Aerosol Climate Data Records from European Satellite Observations (Aerosol_cci)
Producing a global and comprehensive description of atmospheric aerosols requires integration of ground-based, airborne, satellite and model datasets. Due to its complexity, aerosol monitoring requires the use of several data records with complementary information content. This paper describes the lessons learned while developing and qualifying algorithms to generate aerosol Climate Data Records (CDR) within the European Space Agency (ESA) Aerosol_cci project. An iterative algorithm development and evaluation cycle involving core users is applied. It begins with the application-specific refinement of user requirements, leading to algorithm development, dataset processing and independent validation followed by user evaluation. This cycle is demonstrated for a CDR of total Aerosol Optical Depth (AOD) from two subsequent dual-view radiometers. Specific aspects of its applicability to other aerosol algorithms are illustrated with four complementary aerosol datasets. An important element in the development of aerosol CDRs is the inclusion of several algorithms evaluating the same data to benefit from various solutions to the ill-determined retrieval problem. The iterative approach has produced a 17-year AOD CDR, a 10-year stratospheric extinction profile CDR and a 35-year Absorbing Aerosol Index record. Further evolution cycles have been initiated for complementary datasets to provide insight into aerosol properties (i.e., dust aerosol, aerosol absorption).Peer reviewe
Aerosol retrieval algorithm for MERIS
The Medium Resolution Imaging Spectrometer (MERIS) has been launched in 2002 onboard the ESA Envisat satellite and was providing data until Envisat’s end in 2012. The MERIS spectrometer was designed primarily for surface and land scientific applications and measured reflected solar radiation in 15 channels from 400-900nm. Based on the work of Sayer and Hsu for SeaWiFS, an aerosol retrieval for MERIS was developed as part of the ESA Aerosol_cci project. The high spectral resolution of the instrument provides capability for retrieving aerosols. The algorithm can be transferred also to the OLCI measurements operating onboard the Sentinel-3 satellites since 2015.
The presentation will describe the general concept of the retrieval algorithm and show results of aerosol properties retrieved from the MERIS measurements. An information content analysis is used to assess the general capability of retrieving aerosol optical depth (AOD) from the MERIS channels. Challenges concerning the retrieval algorithm and its input data will be discussed
The ADV/ASV AATSR aerosol retrieval algorithm: current status and presentation of a full-mission AOD dataset
<p>An advanced along-track scanning radiometer (AATSR) global multi-year aerosol retrieval algorithm is described. Over land, the AATSR dual-view (ADV) algorithm utilizes the measured top of the atmosphere (TOA) reflectance in both the nadir and forward views to decouple the contributions of the atmosphere and the surface to retrieve aerosol properties. Over ocean, the AATSR single-view (ASV) algorithm minimizes the discrepancy between the measured and modelled TOA reflectances in one of the views to retrieve the aerosol information using an ocean reflectance model. Necessary steps to process global, multi-year aerosol information are presented. These include cloud screening, the averaging of measured reflectance, and post-processing. Limitations of the algorithms are also discussed. The main product of the aerosol retrieval is the aerosol optical depth (AOD) at visible/near-infrared wavelengths. The retrieved AOD is validated using data from the surface-based AERONET and maritime aerosol network (MAN) sun photometer networks as references. The validation shows good agreement with the reference (<i>r</i> = 0.85, RMSE = 0.09 over land; <i>r</i> = 0.83, RMSE = 0.09 at coasts and <i>r</i> = 0.96, RMSE = 0.06 over open ocean). The results of the aerosol retrievals are presented for the full AATSR mission years 2002–2012 with seasonally averaged time series for selected regions.</p