Development of dental composites with reactive fillers that promote precipitation of antibacterial-hydroxyapatite layers.

The study aim was to develop light-curable, high strength dental composites that would release calcium phosphate and chlorhexidine (CHX) but additionally promote surface hydroxyapatite/CHX co-precipitation in simulated body fluid (SBF). 80wt.% urethane dimethacrylate based liquid was mixed with glass fillers containing 10wt.% CHX and 0, 10, 20 or 40wt.% reactive mono- and tricalcium phosphate (CaP). Surface hydroxyapatite layer thickness/coverage from SEM images, Ca/Si ratio from EDX and hydroxyapatite Raman peak intensities were all proportional to both time in SBF and CaP wt.% in the filler. Hydroxyapatite was, however, difficult to detect by XRD until 4weeks. XRD peak width and SEM images suggested this was due to the very small size (~10nm) of the hydroxyapatite crystallites. Precipitate mass at 12weeks was 22wt.% of the sample CaP total mass irrespective of CaP wt.% and up to 7wt.% of the specimen. Early diffusion controlled CHX release, assessed by UV spectrometry, was proportional to CaP and twice as fast in water compared with SBF. After 1week, CHX continued to diffuse into water but in SBF, became entrapped within the precipitating hydroxyapatite layer. At 12weeks CHX formed 5 to 15% of the HA layer with 10 to 40wt.% CaP respectively. Despite linear decline of strength and modulus in 4weeks from 160 to 101MPa and 4 to 2.4GPa, respectively, upon raising CaP content, all values were still within the range expected for commercial composites. The high strength, hydroxyapatite precipitation and surface antibacterial accumulation should reduce tooth restoration failure due to fracture, aid demineralised dentine repair and prevent subsurface carious disease respectively

Hydroxyapatite, fluor-hydroxyapatite and fluorapatite produced via the sol-gel method: dissolution behaviour and biological properties after crystallisation.

Hydroxyapatite (HA), fluor-hydroxyapatite (FHA) with varying levels of fluoride ion substitution and fluorapatite (FA) were synthesised by the sol-gel method as possible implant coating or bone-grafting materials. Calcium nitrate and triethyl phosphite were used as precursors under an ethanol-water based solution. Different amounts of ammonium fluoride were incorporated for the preparation of the FHA and FA sol-gels. After heating and powdering the sol-gels, dissolution behaviour was assessed using ion chromatography to measure Ca(2+) and PO4 (3-) ion release. Biological behaviour was assessed using cellular proliferation with human osteosarcoma cells and alamarBlue™ assay. Statistical analysis was performed with a two way analysis of variance and post hoc testing with a Bonferroni correction. Increasing fluoride substitution into an apatite structure decreased the dissolution rate. Increasing the firing temperature of the HA, FHA and FA sol-gels up to 1,000 °C decreased the dissolution rate. There was significantly higher cellular proliferation on highly substituted FHA and FA than on HA or Titanium. The properties of an implant coating or bone grafting material can be tailored to meet specific requirements by altering the amount of fluoride that is incorporated into the original apatite structure. The dissolution behaviour can further be altered by the temperature at which the sol-gel is fired

A novel mixed-method approach to assess children's sedentary behaviours

Purpose: Accurately measuring sedentary behavior (SB) in children is challenging by virtue of its complex nature. While self-report questionnaires are susceptible to recall errors, accelerometer data lacks contextual information. This study aimed to explore the efficacy of using accelerometry combined with the Digitising Children’s Data Collection (DCDC) for Health application (app), to capture SB comprehensively. Methods: 74 children (9–10 years old) wore ActiGraph GT9X accelerometers for 7 days. Each received a SAMSUNG Galaxy Tab4 (SM-T230) tablet, with the DCDC app installed and a specially designed sedentary behavior study downloaded. The app uses four data collection tools: 1) Questionnaire, 2) Take a photograph, 3) Draw a picture, and 4) Record my voice. Children self-reported their SB daily. Accelerometer data were analyzed using R-package GGIR. App data were downloaded and individual participant profiles created. SBs reported were grouped into categories and reported as frequencies. Results: Participants spent, on average, 629 min (i.e., 73% of their waking time) sedentary. App data revealed most of their out-of-school SB consisted of screen time (112 photos, 114 drawings, and screen time mentioned 135 times during voice recordings). Playing with toys, reading, arts and crafts, and homework were also reported across all four data capturing tools on the app. On an individual level, data from the app often explained irregular patterns in physical activity and SB observed in accelerometer data. Conclusion: This mixed methods approach to assessing SB adds context to accelerometer data, providing researchers with information needed for intervention design

Validating the Sedentary Sphere method in children: does wrist or accelerometer brand matter?

This study aimed to validate the Sedentary Sphere posture classification method from wrist-worn accelerometers in children. Twenty-seven 9-10-year-old children wore ActiGraph GT9X (AG) and GENEActiv (GA) accelerometers on both wrists, and activPAL on the thigh while completing prescribed activities: five sedentary activities, standing with phone, walking (criterion for all 7: observation) and ten minutes free-living play (criterion: activPAL). In an independent sample, 21 children wore AG and GA accelerometers on the non-dominant wrist and activPAL for two days of free-living. Percent accuracy, pairwise 95% equivalence tests (±10% equivalence zone) and intra-class correlation coefficients (ICC) analyses were completed. Accuracy was similar, for prescribed activities irrespective of brand (non-dominant wrist: 77%-78%; dominant wrist: 79%). Posture estimates were equivalent between wrists within brand (±6%, ICC>0.81, lower 95% CI>0.75), between brands worn on the same wrist (±5%, ICC>0.84, lower 95% CI>0.80) and between brands worn on opposing wrists (±6%, ICC>0.78, lower 95% CI>0.72). Agreement with activPAL during free-living was 77%, but sedentary time was underestimated by 7% (GA) and 10% (AG). The Sedentary Sphere can be used to classify posture from wrist-worn AG and GA accelerometers for group-level estimates in children, but future work is needed to improve the algorithm for better individual-level results

Preparation, structural characterisation and antibacterial properties of Ga-doped sol-gel phosphate-based glass

A sol-gel preparation of Ga-doped phosphate-based glass with potential application in antimicrobial devices has been developed. Samples of composition (CaO)(0.30)(Na2O)(0.20-x) (Ga2O3) (x) (P2O5)(0.50) where x = 0 and 0.03 were prepared, and the structure and properties of the gallium-doped sample compared with those of the sample containing no gallium. Analysis of the P-31 MAS NMR data demonstrated that addition of gallium to the sol-gel reaction increases the connectivity of the phosphate network at the expense of hydroxyl groups. This premise is supported by the results of the elemental analysis, which showed that the gallium-free sample contains significantly more hydrogen and by FTIR spectroscopy, which revealed a higher concentration of -OH groups in that sample. Ga K-edge extended X-ray absorption fine structure and X-ray absorption near-edge structure data revealed that the gallium ions are coordinated by six oxygen atoms. In agreement with the X-ray absorption data, the high-energy XRD results also suggest that the Ga3+ ions are octahedrally coordinated with respect to oxygen. Antimicrobial studies demonstrated that the sample containing Ga3+ ions had significant activity against Staphylococcus aureus compared to the control

Conversion, shrinkage, water sorption, flexural strength and modulus of re-mineralizing dental composites

Cure, volumetric changes and mechanical properties were assessed for new dental composites containing chlorhexidine (CHX) and reactive calcium phosphate-containing (CaP) to reduce recurrent caries

The effect of pixel-level fusion on object tracking in multi-sensor surveillance video

This paper investigates the impact of pixel-level fusion of videos from visible (VIZ) and infrared (IR) surveillance cameras on object tracking performance, as compared to tracking in single modality videos. Tracking has been ac-complished by means of a particle filter which fuses a colour cue and the structural similarity measure (SSIM). The highest tracking accuracy has been obtained in IR se-quences, whereas the VIZ video showed the worst track-ing performance due to higher levels of clutter. How-ever, metrics for fusion assessment clearly point towards the supremacy of the multiresolutional methods, especially Dual Tree-Complex Wavelet Transform method. Thus, a new, tracking-oriented metric is needed that is able to ac-curately assess how fusion affects the performance of the tracker. 1

Institutional leadership—the historical case study of a religious organisation

In this chapter, I discuss institutional leadership vis-à-vis the value of poverty. To do so, I analyse how poverty has been conceptualised within a Catholic religious organisation, the Jesuits. The chapter shows that, in the Jesuit case, poverty is not strictly defined. Instead, poverty results from the constant dialogue between the individual Jesuit and their leader. This means that the understanding of what constitutes poverty is neither explicit nor implicit. The chapter contributes to our understanding of institutional leadership as the promotion and protection of values, as per Selznick’s classical definition. However, we discuss a less known part of Selznick’s work in which the ambiguous character of values is highlighted. In this sense, and after the Jesuit case, we advance the possibility that the promotion and protection of institutional values by institutional leaders does not necessarily imply the definition of what a value is. As values are not defined beforehand but the result of a constant dialogue between the leader and their followers, institutional leadership can be revisited and freed from the heroic view that has long characterised it

The school environment and adolescent physical activity and sedentary behaviour : A mixed-studies systematic review

There is increasing academic and policy interest in interventions aiming to promote young people's health by ensuring that the school environment supports healthy behaviours. The purpose of this review was to summarize the current evidence on school-based policy, physical and social-environmental influences on adolescent physical activity and sedentary behaviour. Electronic databases were searched to identify studies that (1) involved healthy adolescents (11-18years old), (2) investigated school-environmental influences and (3) reported a physical activity and/or sedentary behaviour outcome or theme. Findings were synthesized using a non-quantitative synthesis and thematic analysis. Ninety-three papers of mixed methodological quality were included. A range of school-based policy (e.g. break time length), physical (e.g. facilities) and social-environmental (e.g. teacher behaviours) factors were associated with adolescent physical activity, with limited research on sedentary behaviour. The mixed-studies synthesis revealed the importance of specific activity settings (type and location) and intramural sport opportunities for all students. Important physical education-related factors were a mastery-oriented motivational climate and autonomy supportive teaching behaviours. Qualitative evidence highlighted the influence of the wider school climate and shed light on complexities of the associations observed in the quantitative literature. This review identifies future research needs and discusses potential intervention approaches to be considered