1,109 research outputs found
Evaluating deformation behavior of a TBC-System during thermal gradient mechanical fatigue by means of high energy X-ray diffraction
Applications of TBC-systems involve complex thermal mechanical loading pattern including transient thermal gradients across the coated system, which result in multiaxial stresses and stress gradients affecting the damage behavior. In an ongoing research, starting more than 10 years ago, the authors developed laboratory test facilities for evaluating the damage behavior of TBC-systems for gas turbine blades in aeroengines under realistic thermal mechanical loading conditions [1]. Fatigue tests involving thermal gradients have been conducted and damage behavior in dependence of load pattern and pre heat treatment has been intensively investigated on TBC-systems comprising a partially yttria stabilized zirconia (YSZ) topcoat and a MCrAlY bond coat both applied by electron physical vapor deposition (EB-PVD) onto nickel based super alloys serving as substrate [2]. Numerical analyses by means of FE-calculations did provide hypotheses explaining the observed damage behavior [3], but even though the results are plausible they did depend on reasonable assumptions on materials properties since reliable data on the properties of the thin coating layers are still lacking, especially for high temperatures. High energy X-ray diffraction can provide the requested information since it is possible to achieve information on the local deformation processes in each layer with high spatial resolution, and short acquisition times allow for in situ investigation of time dependent deformation processes.
A new test facility based on concepts after [1] for cyclic thermal loading of tubular specimens and applying a controlled thermal gradient across the coated specimen’s wall has been developed for implementation into an electro-mechanical test machine at the advanced photon source (APS) at Argonne National Laboratory. A precision positioning rig allows for exact µm-positioning of the entire test machine with respect to the focused X-ray beam, and X-ray diffraction patterns were taken using a 2D detector, giving accurate 360° lattice parameter data [4]. Tests have been performed with varying thermal and mechanical load schemata intending to determine material properties from the respective strain response. The beam energy was 65 keV, and throughout all experiments the beam scanned through the coating layers with a window and step size of 30 µm. Strain data were acquired in plane parallel to the specimen’s length axis and out of plane. Results of the strain data evaluation will be presented and discussed. Exemplary results are:
- Elastic properties of the YSZ showed a gradient across the coating thickness reflecting the microstructure gradient of the YSZ resulting from the EB-PVD process.
- The YSZ strain was – below the deposition temperature - in plane compressive and out of plane tensile, which is a consequence of (i) the higher thermal expansion coefficient of YSZ with respect to the substrate and (ii) the cylindrical specimen geometry with the YSZ at the outer surface.
[1] M. Bartsch, G. Marci, K. Mull, C. Sick, Adv. Eng. Mater. (1999), 1(2), 127–9
[2] M. Bartsch, B. Baufeld, S. Dalkilic, L. Chernova, M. Heinzelmann, Int. J. Fatigue (2008) 30, 211–8
[3] M. T. Hernandez, A. M. Karlsson, M. Bartsch, Surf. Coat. Technol. (2009) 203, 3549–58
[4] S.F. Siddiqui, K. Knipe, A. Manero, C. Meid, J. Wischek, J. Okasinski, J. Almer, A.M. Karlsson, M. Bartsch, S. Raghavan, Review of Scientific Instruments (2013) 84, 08390
Commit* to change? A call to end the publication of the phrase ‘commit* suicide’
Background: Countering stigma is a fundamental facet of suicide prevention efforts. Integral to this is the promotion of accurate and sensitive language. The phrase ‘commit* suicide’ has prompted marked opposition primarily due to the connotations of immorality and illegality.
Methods: The study investigated the frequency of the use of the wordstem ‘commit’, in relation to self-harm and suicidal behaviours, in the three leading suicide-specific academic journals between 2000 and 2015.
Results: One third (34%) of articles published since the year 2000 used the word ‘commit*’ when describing an act of self-harm or suicide. Over half of these articles (57%) used the phrase on more than one occasion, with 6% using it more than 10 times in the same manuscript. The percentage of papers utilising the word ‘commit*’ has fluctuated over time, but there is a promising downward trend in the use of this phrase from 33% in 2000 to 13% in 2015 (p < 0.001).
Discussion: We advocate for the implementation of publication requirements regarding the language used when discussing suicide. Whilst we call for collective responsibility amongst academics and clinicians, editors hold a unique position in ensuring that outdated, inaccurate and stigma-laden terms are expunged from the scientific literature
Domestic violence and self-poisoning in Sri Lanka
Background. There is increasing evidence that domestic violence (DV) is an important risk factor for suicidal behaviour. The level of risk and its contribution to the overall burden of suicidal behaviour among men and women has not been quantified in South Asia. We carried out a large case-control study to examine the association between DV and self-poisoning in Sri Lanka. Methods. Cases (N = 291) were patients aged ⩾18 years, admitted to a tertiary hospital in Kandy Sri Lanka for self-poisoning. Sex and age frequency matched controls were recruited from the hospital’s outpatient department (N = 490) and local population (N = 450). Exposure to DV was collected through the Humiliation, Afraid, Rape, Kick questionnaire. Multivariable logistic regression models were conducted to estimate the association between DV and self-poisoning, and population attributable fractions were calculated. Results. Exposure to at least one type of DV within the previous 12 months was strongly associated with self-poisoning for women [adjusted OR (AOR) 4.08, 95% CI 1.60–4.78] and men (AOR 2.52, 95% CI 1.51–4.21), compared to those reporting no abuse. Among women, the association was strongest for physical violence (AOR 14.07, 95% CI 5.87–33.72), whereas among men, emotional abuse showed the highest risk (AOR 2.75, 95% CI 1.57–4.82). PAF % for exposure to at least one type of DV was 38% (95% CI 32–43) in women and 22% (95% CI 14–29) in men. Conclusions. Multi-sectoral interventions to address DV including enhanced identification in health care settings, community-based strategies, and integration of DV support and psychological services may substantially reduce suicidal behaviour in Sri Lanka
Differential cargo mobilisation within Weibel-Palade bodies after transient fusion with the plasma membrane.
Inflammatory chemokines can be selectively released from Weibel-Palade bodies (WPBs) during kiss-and-run exocytosis. Such selectivity may arise from molecular size filtering by the fusion pore, however differential intra-WPB cargo re-mobilisation following fusion-induced structural changes within the WPB may also contribute to this process. To determine whether WPB cargo molecules are differentially re-mobilised, we applied FRAP to residual post-fusion WPB structures formed after transient exocytosis in which some or all of the fluorescent cargo was retained. Transient fusion resulted in WPB collapse from a rod to a spheroid shape accompanied by substantial swelling (>2 times by surface area) and membrane mixing between the WPB and plasma membranes. Post-fusion WPBs supported cumulative WPB exocytosis. To quantify diffusion inside rounded organelles we developed a method of FRAP analysis based on image moments. FRAP analysis showed that von Willebrand factor-EGFP (VWF-EGFP) and the VWF-propolypeptide-EGFP (Pro-EGFP) were immobile in post-fusion WPBs. Because Eotaxin-3-EGFP and ssEGFP (small soluble cargo proteins) were largely depleted from post-fusion WPBs, we studied these molecules in cells preincubated in the weak base NH4Cl which caused WPB alkalinisation and rounding similar to that produced by plasma membrane fusion. In these cells we found a dramatic increase in mobilities of Eotaxin-3-EGFP and ssEGFP that exceeded the resolution of our method (∼ 2.4 µm2/s mean). In contrast, the membrane mobilities of EGFP-CD63 and EGFP-Rab27A in post-fusion WPBs were unchanged, while P-selectin-EGFP acquired mobility. Our data suggest that selective re-mobilisation of chemokines during transient fusion contributes to selective chemokine secretion during transient WPB exocytosis. Selective secretion provides a mechanism to regulate intravascular inflammatory processes with reduced risk of thrombosis
Regional variation in suicide rates in Sri Lanka between 1955 and 2011: a spatial and temporal analysis
Minority and mode conversion heating in (3He)-H JET plasma
Radio frequency (RF) heating experiments have recently been conducted in JET (He-3)-H plasmas. This type of plasmas will be used in ITER's non-activated operation phase. Whereas a companion paper in this same PPCF issue will discuss the RF heating scenario's at half the nominal magnetic field, this paper documents the heating performance in (He-3)-H plasmas at full field, with fundamental cyclotron heating of He-3 as the only possible ion heating scheme in view of the foreseen ITER antenna frequency bandwidth. Dominant electron heating with global heating efficiencies between 30% and 70% depending on the He-3 concentration were observed and mode conversion (MC) heating proved to be as efficient as He-3 minority heating. The unwanted presence of both He-4 and D in the discharges gave rise to 2 MC layers rather than a single one. This together with the fact that the location of the high-field side fast wave (FW) cutoff is a sensitive function of the parallel wave number and that one of the locations of the wave confluences critically depends on the He-3 concentration made the interpretation of the results, although more complex, very interesting: three regimes could be distinguished as a function of X[He-3]: (i) a regime at low concentration (X[He-3] < 1.8%) at which ion cyclotron resonance frequency (ICRF) heating is efficient, (ii) a regime at intermediate concentrations (1.8 < X[He-3] < 5%) in which the RF performance is degrading and ultimately becoming very poor, and finally (iii) a good heating regime at He-3 concentrations beyond 6%. In this latter regime, the heating efficiency did not critically depend on the actual concentration while at lower concentrations (X[He-3] < 4%) a bigger excursion in heating efficiency is observed and the estimates differ somewhat from shot to shot, also depending on whether local or global signals are chosen for the analysis. The different dynamics at the various concentrations can be traced back to the presence of 2 MC layers and their associated FW cutoffs residing inside the plasma at low He-3 concentration. One of these layers is approaching and crossing the low-field side plasma edge when 1.8 < X[He-3] < 5%. Adopting a minimization procedure to correlate the MC positions with the plasma composition reveals that the different behaviors observed are due to contamination of the plasma. Wave modeling not only supports this interpretation but also shows that moderate concentrations of D-like species significantly alter the overall wave behavior in He-3-H plasmas. Whereas numerical modeling yields quantitative information on the heating efficiency, analytical work gives a good description of the dominant underlying wave interaction physics
Astrometric and Light-travel Time Orbits to Detect Low-mass Companions: A Case Study of the Eclipsing System R Canis Majoris
We discuss a method to determine orbital properties and masses of low-mass
bodies orbiting eclipsing binaries. The analysis combines long-term eclipse
timing modulations (light-travel time or LTT effect) with short-term,
high-accuracy astrometry. As an illustration of the method, the results of a
comprehensive study of Hipparcos astrometry and over a hundred years of eclipse
timings of the Algol-type eclipsing binary R Canis Majoris are presented. A
simultaneous solution of the astrometry and the LTTs yields an orbital period
of P_12=92.8+/-1.3 yr, an LTT semiamplitude of 2574+/-57 s, an angular
semi-major axis of a_12=117+/-5 mas, and values of the orbital eccentricity and
inclination of e_12=0.49+/-0.05, and i_12=91.7+/-4.7 deg, respectively.
Adopting the total mass of R CMa of M_12=1.24+/-0.05 Mo, the mass of the third
body is M_3=0.34+/-0.02 Mo and the semi-major axis of its orbit is
a_3=18.7+/-1.7 AU. From its mass, the third body is either a dM3-4 star or,
more unlikely, a white dwarf. With the upcoming microarcsecond-level
astrometric missions, the technique that we discuss can be successfully applied
to detect and characterize long-period planetary-size objects and brown dwarfs
around eclipsing binaries. Possibilities for extending the method to pulsating
variables or stars with transiting planets are briefly addressed.Comment: 9 pages, 3 figures, accepted for publication in AJ (April 2002 issue
P-selectin mobility undergoes a sol-gel transition as it diffuses from exocytosis sites into the cell membrane
In response to vascular damage, P-selectin molecules are secreted onto the surface of cells that line our blood vessels. They then serve as mechanical anchors to capture leucocytes from the blood stream. Here, we track individual P-selectin molecules released at the surface of live endothelial cells following stimulated secretion. We find P-selectin initially shows fast, unrestricted diffusion but within a few minutes, movement becomes increasingly restricted and ~50% of the molecules become completely immobile; a process similar to a sol-gel transition. We find removal of the extracellular C-type lectin domain (ΔCTLD) and/or intracellular cytoplasmic tail domain (ΔCT) has additive effects on diffusive motion while disruption of the adapter complex, AP2, or removal of cell-surface heparan sulphate restores mobility of full-length P-selectin close to that of ΔCT and ΔCTLD respectively. We have found P-selectin spreads rapidly from sites of exocytosis and evenly decorates the cell surface, but then becomes less mobile and better-suited to its mechanical anchoring function
A grounded theory study of the narrative behind Indian physiotherapists global migration
It is estimated that an additional 6.4 million allied health professionals are required to address India's health challenges. Physiotherapy is amongst the largest of these professions. Over the last decade, thousands of Indian physiotherapists have sought to study and work overseas. In this study, 19 physiotherapists from across India were interviewed. Data were collected and analysed using construct+ivist grounded theory methods. The findings indicate that the Indian physiotherapy profession faces many political and clinical hierarchical challenges within the Indian healthcare infrastructure. The profession's education provision has developed, and the private clinical sector has grown, but there are significant disparities in quality and standards across the sector. The profession in India has variable autonomy, is not nationally regulated, is poorly paid, and the leadership has been divided. The political, educational, and clinical context in Indian physiotherapy impacts upon physiotherapists' ability to practise effectively to their professional satisfaction. Individual physiotherapists are frustrated by their workplace and travel overseas where they hear that the physiotherapy profession and practice is different. Whilst the disjunctures influencing these factors continue, and overseas physiotherapy practice is perceived as different and superior, Indian physiotherapists will continue to seek to migrate overseas, and facilitating their return will be challenging
- …