Macro- and micro-strain in GaN nanowires on Si(111)

We analyze the strain state of GaN nanowire ensembles by x-ray diffraction. The nanowires are grown by molecular beam epitaxy on a Si(111) substrate in a self-organized manner. On a macroscopic scale, the nanowires are found to be free of strain. However, coalescence of the nanowires results in micro-strain with a magnitude from +-0.015% to +-0.03%.This micro-strain contributes to the linewidth observed in low-temperature photoluminescence spectra

Sperimagnetism in Fe(78)Er(5)B(17) and Fe(64)Er(19)B(17) metallic glasses: II. Collinear components and ferrimagnetic compensation

Magnetization measurements on an Fe(64)Er(19)B(17) glass and polarized-beam neutron scattering measurements on Fe(78)Er(5)B(17) and Fe(64)Er(19)B(17) were described in part I. The finite spin-flip neutron scattering cross sections were calculated using a sperimagnetic structure based on random cone arrangements of the magnetic moments. The temperature variation of the cross sections of Fe(64)Er(19)B(17) suggested that a compensated sperimagnetic phase existed at T(comp). The analysis of the non-spin-flip neutron scattering cross sections is described here in part II. Two spin-dependent total structure factors S(+/-+/-). (Q) were defined from these cross sections and, despite the limited range of the data 0.5 angstrom(-1) , are zero on both sublattices in the compensated sperimagnetic structure at T(comp). The pre-peak in the spin-dependent total structure factors at 112 K showed that it originated in the atomic structure and it may involve Fe-Er-Fe 'collineations' at a radial distance of approximate to 6.0 angstrom. Finally, the RDF(+/-+/-) (r) of Fe(64)Er(19)B(17) at 180 K and of Fe(78)Er(5)B(17) at 2 K show that both glasses have the (mu(Fe) UP:mu(Er) DOWN) structure like the (Fe, Tb)(83)B(17) collinear ferrimagnets

Insights into the Structure of Dot@Rod and Dot@Octapod CdSe@CdS Heterostructures

CdSe@CdS dot@rods with diameter around 6 nm and length of either 20, 27, or 30 nm and dot@octapods with pod diameters of ?15 nm and lengths of ?50 nm were investigated by X-ray absorption spectroscopy. These heterostructures are prepared by seed-mediated routes, where the structure, composition, and morphology of the CdSe nanocrystals used as a seed play key roles in directing the growth of the second semiconducting domain. The local structural environment of all the elements in the CdSe@CdS heterostructures was investigated at the Cd, S, and Se K-edges by taking advantage of the selectivity of X-ray absorption spectroscopy, and was compared to pure reference compounds. We found that the structural features of dot@rods are independent of the size of the rods. These structures can be described as made of a CdSe dot and a CdS rod, both in the wurtzite phase with a high crystallinity of both the core and the rod. This result supports the effectiveness of high temperature colloidal synthesis in promoting the formation of core@shell nanocrystals with very low defectivity. On the other hand, data on the CdSe@CdS with octapod morphology suggest the occurrence of a core composed of a CdSe cubic sphalerite phase with eight pods made of CdS wurtzite phase. Our findings are compared to current models proposed for the design of functional heterostructures with controlled nanoarchitecture

An approach to the use of hydrogen for commercial aircraft engines

This paper presents some results on the performance of hydrogen-based engines. In particular, the following aspects are addressed: benefits associated with specific fuel and energy consumption, net thrust, turbine entry temperature, and hardware changes needed in the upgrading process from kerosene to hydrogen. Hydrogen is a high-energy clean-burning fuel whose main combustion product is water vapour plus traces of nitrogen oxides. This fact suggests that, provided that the technology is available, the use of hydrogen could offer some opportunities for the environmentally friendly development and sustained growth of commercial aviation. The study has been performed in the frame of the Liquid Hydrogen Fuelled Aircraft – System Analysis (CRYOPLANE) project. This is a Fifth Framework Programme, supported by the European Commission, whose objective was to assess the feasibility of using hydrogen as a clean energy source for air transportation systems

Large magnetic anisotropy in Ferrihydrite nanoparticles synthesized from reverse micelles

Six-line ferrihydrite(FH) nanoparticles have been synthesized in the core of reverse micelles, used as nanoreactors to obtain average particle sizes $$ $\approx$ 2 to 4 nm. The blocking temperatures $T_B^m$ extracted from magnetization data increased from $\approx 10$ to 20 K for increasing particle size. Low-temperature \MOS measurements allowed to observe the onset of differentiated contributions from particle core and surface as the particle size increases. The magnetic properties measured in the liquid state of the original emulsion showed that the \FH phase is not present in the liquid precursor, but precipitates in the micelle cores after the free water is freeze-dried. Systematic susceptibility \chi_{ac}(\emph{f},T) measurements showed the dependence of the effective magnetic anisotropy energies $E_{a}$ with particle volume, and yielded an effective anisotropy value of $K_{eff} = 312\pm10$ kJ/m$^3$.Comment: 8 pages, 10 figures. Nanotechnology, v17 (Nov. 2006) In pres

Constructive updating/downdating of oblique projectors: a generalization of the Gram-Schmidt process

A generalization of the Gram-Schmidt procedure is achieved by providing equations for updating and downdating oblique projectors. The work is motivated by the problem of adaptive signal representation outside the orthogonal basis setting. The proposed techniques are shown to be relevant to the problem of discriminating signals produced by different phenomena when the order of the signal model needs to be adjusted.Comment: As it will appear in Journal of Physics A: Mathematical and Theoretical (2007

Responsive Photonic Liquid Marbles

Liquid marbles have potential to serve as mini-reactors for fabricating new materials, but this has been exploited little and mostly for conventional chemical reactions. Here, we uncover the unparalleled capability of liquid marbles to act as platforms for controlling the self-assembly of a bio-derived polymer, hydroxypropyl cellulose, into a cholesteric liquid crystalline phase showing structural coloration by Bragg reflection. By adjusting the cholesteric pitch via quantitative water extraction, we achieve liquid marbles that we can tailor for structural color anywhere in the visible range. Liquid marbles respond with color change that can be detected by eye, to changes in temperature, exposure to toxic chemicals and mechanical deformation. Our concept demonstrates the advantages of using liquid marbles as a miniature platform for controlling the liquid crystal self-assembly of bio-derived polymers, and their exploitation to fabricate sustainable, responsive soft photonic objects

Structure and grain growth of TiO2 nanoparticles investigated by electron and X-ray diffractions and Ta-181 perturbed angular correlations

Bare and coated TiO₂ nanoparticles with particle sizes d 100 nm after 1300 K. PAC spectra taken in the same temperature range show that with increasing temperature, the initially disordered state transforms to well-ordered rutile TiO₂. The data suggest a critical grain size of d ~10 nm for the onset of the ordering process. The spectra of coarse-grained TiO₂ are reached at a particle size d >= 30 nm. In n-TiO₂ coated with Al₂O₃ and ZrO₂ both the cores and the coatings were found to grow with increasing temperature; the cores of the coated particles, however, grow much less than those of the noncoated particles. The PAC method was used to investigate the QI in both TiO₂ cores and in the ZrO₂ coating of n-TiO₂/ZrO₂ at different temperatures. These data suggest that although the coated particles grow with temperature, the ordering process is obstructed, possibly by a solid state reaction between the TiO₂ kernels and the coatings