Numerical Simulation of Flow Through an Artificial Heart

A solution procedure was developed that solves the unsteady, incompressible Navier-Stokes equations, and was used to numerically simulate viscous incompressible flow through a model of the Pennsylvania State artificial heart. The solution algorithm is based on the artificial compressibility method, and uses flux-difference splitting to upwind the convective terms; a line-relaxation scheme is used to solve the equations. The time-accuracy of the method is obtained by iteratively solving the equations at each physical time step. The artificial heart geometry involves a piston-type action with a moving solid wall. A single H-grid is fit inside the heart chamber. The grid is continuously compressed and expanded with a constant number of grid points to accommodate the moving piston. The computational domain ends at the valve openings where nonreflective boundary conditions based on the method of characteristics are applied. Although a number of simplifing assumptions were made regarding the geometry, the computational results agreed reasonably well with an experimental picture. The computer time requirements for this flow simulation, however, are quite extensive. Computational study of this type of geometry would benefit greatly from improvements in computer hardware speed and algorithm efficiency enhancements

Simulation of blood flow through an artificial heart

A numerical simulation of the incompressible viscous flow through a prosthetic tilting disk heart valve is presented in order to demonstrate the current capability to model unsteady flows with moving boundaries. Both steady state and unsteady flow calculations are done by solving the incompressible Navier-Stokes equations in 3-D generalized curvilinear coordinates. In order to handle the moving boundary problems, the chimera grid embedding scheme which decomposes a complex computational domain into several simple subdomains is used. An algebraic turbulence model for internal flows is incorporated to reach the physiological values of Reynolds number. Good agreement is obtained between the numerical results and experimental measurements. It is found that the tilting disk valve causes large regions of separated flow, and regions of high shear

Paper Session III-A - Dual-Use Applications of a Computational Fluid Dynamics Code for Viscous Incompressible Flow

An efficient incompressible flow analysis code, INS3D, has been developed at NASA Ames Research Center and applied successfully to numerous aerospace applications. The INS3D code has also been applied to non-aerospace applications, such as biofluid problems, with great success. This paper presents a computational flow simulation capability originally developed for liquid rocket engine analysis and subsequently applied to analyze the left ventricular assist device being developed jointly by NASA Johnson Space Center and the Baylor College of Medicine

Rotary blood pump

A blood pump that comprises a pump housing having a blood flow path therethrough, a blood inlet, and a blood outlet; a stator mounted to the pump housing, the stator having a stator field winding for producing a stator magnetic field; a flow straightener located within the pump housing, and comprising a flow straightener hub and at least one flow straightener blade attached to the flow straightener hub; a rotor mounted within the pump housing for rotation in response to the stator magnetic field, the rotor comprising an inducer and an impeller; the inducer being located downstream of the flow straightener, and comprising an inducer hub and at least one inducer blade attached to the inducer hub; the impeller being located downstream of the inducer, and comprising an impeller hub and at least one impeller blade attached to the impeller hub; and preferably also comprising a diffuser downstream of the impeller, the diffuser comprising a diffuser hub and at least one diffuser blade. Blood flow stagnation and clot formation within the pump are minimized by, among other things, providing the inducer hub with a diameter greater than the diameter of the flow straightener hub; by optimizing the axial spacing between the flow straightener hub and the inducer hub, and between the impeller hub and the diffuser hub; by optimizing the inlet angle of the diffuser blades; and by providing fillets or curved transitions between the upstream end of the inducer hub and the shaft mounted therein, and between the impeller hub and the shaft mounted therein

Attentional WM is not necessarily specifically related with fluid intelligence: the case of smart children with ADHD symptoms.

Executive functions and, in particular, Attentional (active) Working Memory (WM) have been associated with fluid intelligence. The association contrasts with the hypothesis that children with ADHD exhibit problems with WM tasks requiring controlled attention and may have a good fluid intelligence. This paper examines whether children who are intelligent but present ADHD symptoms fail in attentional WM tasks. The latter result would be problematic for theories assuming the generality of a strict relationship between intelligence and WM. To study these issues, a battery of tests was administered to a group of 58 children who all displayed symptoms of ADHD. All children were between the age of 8 and 11 years, and were described by their teachers as smart. Children were compared to a control group matched for age, schooling, and gender. The battery included a test of fluid intelligence (Raven's Coloured Matrices), and a series of visuospatial WM tasks. Results showed that children with ADHD were high in intelligence but significantly lower than the controls in WM tasks requiring high attentional control, whereas there was no difference in WM tasks requiring low attentional control. Furthermore, only high attentional control WM tasks were significantly related to Raven's performance in the control group, whereas all WM tasks were similarly related in the ADHD group. It is concluded that performance in high attentional control WM tasks may be related to fluid intelligence, but also to a specific control component that is independent of intelligence and is poor in children with ADHD

International Consensus Statement on Rhinology and Allergy: Rhinosinusitis

Background: The 5 years since the publication of the first International Consensus Statement on Allergy and Rhinology: Rhinosinusitis (ICAR‐RS) has witnessed foundational progress in our understanding and treatment of rhinologic disease. These advances are reflected within the more than 40 new topics covered within the ICAR‐RS‐2021 as well as updates to the original 140 topics. This executive summary consolidates the evidence‐based findings of the document. Methods: ICAR‐RS presents over 180 topics in the forms of evidence‐based reviews with recommendations (EBRRs), evidence‐based reviews, and literature reviews. The highest grade structured recommendations of the EBRR sections are summarized in this executive summary. Results: ICAR‐RS‐2021 covers 22 topics regarding the medical management of RS, which are grade A/B and are presented in the executive summary. Additionally, 4 topics regarding the surgical management of RS are grade A/B and are presented in the executive summary. Finally, a comprehensive evidence‐based management algorithm is provided. Conclusion: This ICAR‐RS‐2021 executive summary provides a compilation of the evidence‐based recommendations for medical and surgical treatment of the most common forms of RS

Distribution of Cs-137 in the Mediterranean mussel (Mytilus galloprovincialis) in Eastern Black Sea Coast of Turkey

DALGIC, GOKTUG/0000-0001-8619-6160;WOS: 000377726700064PubMed: 27021268This study presents the results of Cs-137 and K-40 radionuclide concentrations in mussel (Mytilus galloprovincialis) samples collected during the period of February-November 2014 from twelve different stations within the border of the eastern Black Sea region of Turkey. Also, these radionuclide concentrations were determined in sea water and sediment samples. the activity concentrations in seawater, sediment and mussel tissue samples were between 1.12-1.69 mBq L-1, 3.26-30.74 and 1.61-3.16 Bq kg(-1) for Cs-137 and 231.41-399.49 mBq L-1, 215.71-450.07 and 286.84-382.16 Bq kg(-1) for K-40, respectively. These values are also in accordance with the concentrations reported for similar regions. Additionally, radiological impact parameters such as daily intake of Cs-137 and K-40, annual committed effective dose and carcinogenic risk due to the consumption of mussel were calculated and compared with the international data. Lifetime cancer risk values are lower than the limit of 10(-3). (C) 2016 Elsevier Ltd. All rights reserved.Scientific and Technical Research Council of Turkey (TUBITAK) (CAYDAG)Turkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK) [113Y148]This work was supported by the Scientific and Technical Research Council of Turkey (TUBITAK) (CAYDAG, Project No: 113Y148)

Time-Accurate Simulations of Incompressible Flows with Moving Boundaries

This paper presents viewgraphs of time-accurate simulations of unsteady incompressible flow with moving boundaries