22 research outputs found
Comparison of Hemoglobin A1c Levels in Healthy Patients and Non Diabetic Iron Deficiency Anemia(IDA) Patients Before and after Intervention in Rafsanjan
Introduction: Glycemia and blood glucose levels are under the effect of Hb A1c and therefore they could be considered as a valid index for the follow-up and control of diabetes .There are different and controversial reports on the effects of iron deficiency anemia on Hb A1c. Effects of IDA in non diabetic patients are also unknown. The aim of the study was the comparison of Hb A1C levels in healthy patients and non diabetic Iron deficiency anemia (IDA) patients before and after intervention in Rafsanjan. Methods: This research was a semi– experimental intervention study. The population under study consisted of 30 non diabetic IDA patients and 30 healthy patients in Rafsanjan that were matched for age and sex and other characteristics. Ferritin, Hb, HCT, MCV, MCH, MCHC, FBS, BS 2HPP and Hb A1c, were measured to confirm IDA. These parameters were also measured in the healthy subjects (control group) to confirm their health and them being non diabetic and iron sufficient and all parameters were compared after the intervention. Then all patients with IDA were treated with iron; 6mg/ kg for 3 months. The tests was repeated again and results compared with the results of both the groups before the intervention. Results: The mean Hb A1c level before iron treatment was (7.64±2.08) in patients with IDA that was higher than the control group (5.97± 1.01)(p<0.05). Hb A1c decreased after iron therapy in patients with IDA. Conclusion: It is recommended that before any diagnostic or therapeutic decisions are made with regards to Hb A1c, iron deficiency should be corrected
Towards advanced flame retardant organic coatings: Expecting a new function from polyaniline
International audienc
In-Out Surface Modification of Halloysite Nanotubes (HNTs) for <i>Excellent</i> Cure of Epoxy: Chemistry and Kinetics Modeling
In-out surface modification of halloysite nanotubes (HNTs) has been successfully performed by taking advantage of 8-hydroxyquinolines in the lumen of HNTs and precisely synthesized aniline oligomers (AO) of different lengths (tri- and pentamer) anchored on the external surface of the HNTs. Several analyses, including FTIR, H-NMR, TGA, UV-visible spectroscopy, and SEM, were used to establish the nature of the HNTs’ surface engineering. Nanoparticles were incorporated into epoxy resin at 0.1 wt.% loading for investigation of the contribution of surface chemistry to epoxy cure behavior and kinetics. Nonisothermal differential scanning calorimetry (DSC) data were fed into home-written MATLAB codes, and isoconversional approaches were used to determine the apparent activation energy (Eα) as a function of the extent of cure reaction (α). Compared to pristine HNTs, AO-HNTs facilitated the densification of an epoxy network. Pentamer AO-HNTs with longer arms promoted an Excellent cure; with an Eα value that was 14% lower in the presence of this additive than for neat epoxy, demonstrating an enhanced cross-linking. The model also predicted a triplet of cure (m, n, and ln A) for autocatalytic reaction order, non-catalytic reaction order, and pre-exponential factor, respectively, by the Arrhenius equation. The enhanced autocatalytic reaction in AO-HNTs/epoxy was reflected in a significant rise in the value of m, from 0.11 to 0.28. Kinetic models reliably predict the cure footprint suggested by DSC measurements
Injectable Cell-Laden Hydrogels for Tissue Engineering: Recent Advances and Future Opportunities
Tissue engineering intends to create functionalized tissues/organs for regenerating the injured parts of the body using cells and scaffolds. A scaffold as a supporting substrate affects the cells' fate and behavior, including growth, proliferation, migration, and differentiation. Hydrogel as a biomimetic scaffold plays an important role in cellular behaviors and tissue repair, providing a microenvironment close to the extracellular matrix with adjustable mechanical and chemical features that can provide sufficient nutrients and oxygen. To enhance the hydrogel performance and compatibility with native niche, the cell-laden hydrogel is an attractive choice to mimic the function of the targeted tissue. Injectable hydrogels, due to the injectability, are ideal options for in vivo minimally invasive treatment. Cell-laden injectable hydrogels can be utilized for tissue regeneration in a noninvasive way. This article reviews the recent advances and future opportunities of cell-laden injectable hydrogels and their functions in tissue engineering. It is expected that this strategy allows medical scientists to develop a minimally invasive method for tissue regeneration in clinical settings. Cell-laden hydrogels have been vastly utilized in biomedical application, especially tissue engineering. It is expected that this upcoming review article will be a motivation for the community. Although this strategy is still in its early stages, this concept is so alluring that it has attracted all scientists in the community and specialists at academic health centers. Certainly, this approach requires more development, and a bunch of crucial challenges have yet to be solved. In this review, we discuss this various aspects of this approach, the questions that must be answered, the expectations associated with it, and rational restrictions to develop injectable cell-laden hydrogels. © Copyright 2021, Mary Ann Liebert, Inc., publishers 2021
Agarose-based biomaterials for advanced drug delivery
Agarose is a prominent marine polysaccharide representing reversible thermogelling behavior, outstanding mechanical properties, high bioactivity, and switchable chemical reactivity for functionalization. As a result, agarose has received particular attention in the fabrication of advanced delivery systems as sophisticated carriers for therapeutic agents. The ever-growing use of agarose-based biomaterials for drug delivery systems resulted in rapid growth in the number of related publications, however still, a long way should be paved to achieve FDA approval for most of the proposed products. This review aims at a classification of agarose-based biomaterials and their derivatives applicable for controlled/targeted drug delivery purposes. Moreover, it attempts to deal with opportunities and challenges associated with the future developments ahead of agarose-based biomaterials in the realm of advanced drug delivery. Undoubtedly, this class of biomaterials needs further advancement, and a lot of critical questions have yet to be answered. © 202
Mesenchymal Stem Cell Spheroids Embedded in an Injectable Thermosensitive Hydrogel: An in Situ Drug Formation Platform for Accelerated Wound Healing
The ability of mesenchymal stem cells (MSCs) to enhance cutaneous wound healing has been well established. Extensive expansion of cells to reach sufficient cell numbers for regenerating tissues has always limited cell-based therapies. An ingenious solution to address this challenge is to develop a strategy to increase the immunomodulatory effects of MSCs without expanding them. In this study, we employed a simple characteristic of cells. It was observed that an optimized three-dimensional (3D) MSC culture in spheroid forms significantly improved their paracrine effects. An electrospray (ES) encapsulation apparatus was used to encapsulate individual or 3D spheroid MSCs into microscale alginate beads (microbeads). Furthermore, alginate microbeads were embedded in an injectable thermosensitive hydrogel matrix, which gels at skin temperature. The hydrogel fills and seals the wounds cavities, maintains high humidity at the wound area, absorbs exudate, and fixes microbeads, protecting them from direct contact with the harsh wound environment. In vitro investigations revealed that secretion of interleukin 10 (IL-0) and transforming growth factor β1 (TGF-β1) gene was gradually enhanced, providing a delivery platform for prolonged release of bioactive molecules. In vivo study on full-thickness wounds showed granulation and re-epithelialization, only after 7 days. Moreover, increased expression of α-smooth muscle actin (α-SMA) in the first 14 days after treatment ensured wound contraction. Besides, a gradual decrease in α-SMA secretion resulted in reduced scar formation. Well-organized collagen fibrils and high expression of the angiogenesis biomarker CD31 confirmed the promoting effect of the hydrogel on the wound-healing process. The proposed wound-dressing system would potentially be used in scalable and effective cell-based wound therapies. Copyright © 2020 American Chemical Society
Chitosan-based blends for biomedical applications
Polysaccharides are the most abundant naturally available carbohydrate polymers; composed of monosaccharide units covalently connected together. Chitosan is the most widely used polysaccharides because of its exceptional biocompatibility, mucoadhesion, and chemical versatility. However, it suffers from a few drawbacks, e.g. poor mechanical properties and antibacterial activity for biomedical applications. Blending chitosan with natural or synthetic polymers may not merely improve its physicochemical and mechanical properties, but may also improve its bioactivity-induced properties. This review paper summarizes progress in chitosan blends with biodegradable polymers and polysaccharides and their biomedical applications. Blends of chitosan with alginate, starch, cellulose, pectin and dextran and their applications were particularly addressed. The critical and challenging aspects as well as the future ahead of the use of chitosan-based blends were eventually enlightened. © 202
Polysaccharide nanocomposites in wastewater treatment : A review
In modern times, wastewater treatment is vital due to increased water contamination arising from pollutants such as nutrients, pathogens, heavy metals, and pharmaceutical residues. Polysaccharides (PSAs) are natural, renewable, and non-toxic biopolymers used in wastewater treatment in the field of gas separation, liquid filtration, adsorption processes, pervaporation, and proton exchange membranes. Since addition of nanoparticles to PSAs improves their sustainability and strength, nanocomposite PSAs has gained significant attention for wastewater treatment in the past decade. This review presents a comprehensive analysis of PSA-based nanocomposites used for efficient wastewater treatment, focusing on adsorption, photocatalysis, and membrane-based methods. It also discusses potential future applications, challenges, and opportunities in adsorption, filtration, and photocatalysis. Recently, PSAs have shown promise as adsorbents in biological-based systems, effectively removing heavy metals that could hinder microbial activity. Cellulose-mediated adsorbents have successfully removed various pollutants from wastewater, including heavy metals, dyes, oil, organic solvents, pesticides, and pharmaceutical residues. Thus, PSA nanocomposites would support biological processes in wastewater treatment plants. A major concern is the discharge of antibiotic wastes from pharmaceutical industries, posing significant environmental and health risks. PSA-mediated bio-adsorbents, like clay polymeric nanocomposite hydrogel beads, efficiently remove antibiotics from wastewater, ensuring water quality and ecosystem balance. The successful use of PSA-mediated bio-adsorbents in wastewater treatment depends on ongoing research to optimize their application and evaluate their potential environmental impacts. Implementing these eco-friendly adsorbents on a large scale holds great promise in significantly reducing water pollution, safeguarding ecosystems, and protecting human health.