Transonic wind tunnel test of a 14 percent thick oblique wing

An experimental investigation was conducted at the ARC 11- by 11-Foot Transonic Wind Tunnel as part of the Oblique Wing Research Aircraft Program to study the aerodynamic performance and stability characteristics of a 0.087-scale model of an F-8 airplane fitted with an oblique wing designed by Rockwell International. The 10.3 aspect ratio, straight-tapered wing of 0.14 thickness/chord ratio was tested at two different mounting heights above the fuselage. Additional tests were conducted to assess low-speed behavior with and without flaps, aileron effectiveness at representative flight conditions, and transonic drag divergence with 0 degree wing sweep. Longitudinal stability data were obtained at sweep angles of 0, 30, 45, 60, and 65 degrees, at Mach numbers ranging from 0.25 to 1.40. Test Reynolds numbers varied from 3.2 to 6.6 x 10 exp 6/ft. and angle of attack ranged from -5 to +18 degrees. Most data were taken at zero sideslip, but a few runs were at sideslip angles of +/- 5 degrees. The raised wing position proved detrimental overall, although side force and yawing moment were reduced at some conditions. Maximum lift coefficient with the flaps deflected was found to fall short of the value predicted in the preliminary design document. The performance and trim characteristics of the present wing are generally inferior to those obtained for a previously tested wing designed at ARC

2012 National Turfgrass Evaluation Program Tall Fescue Test: 2012 and 2013 Data

Tall fescue is the cool-season turfgrass best adapted for the transition zone because it tolerates drought and heat and has few serious insect or disease problems. It possesses a rather coarse leaf texture, lacks stolons, and has only very short rhizomes. Efforts to improve cultivar quality include selecting for finer leaf texture, rich green color, and better sward density while maintaining good stress tolerance and disease resistance. New introductions need regular evaluation to determine their long-range suitability for use in Kansas

2012 National Turfgrass Evaluation Program Tall Fescue Test: 2015 Data

A number of the cultivars included in the 2012 National Turfgrass Evaluation Program Tall Fescue Test performed well and showed good brown patch resistance in southern Kansas during the 2015 growing season

2012 National Turfgrass Evaluation Program Tall Fescue Test: 2014 Data

A number of the cultivars included in the 2012 National Turfgrass Evaluation Program Tall Fescue Test performed well and showed good brown patch resistance in southern Kansas during the 2014 growing season

GOES-R Algorithms: A Common Science and Engineering Design and Development Approach for Delivering Next Generation Environmental Data Products

GOES-R, the next generation of the National Oceanic and Atmospheric Administration’s (NOAA) Geostationary Operational Environmental Satellite (GOES) System, represents a new technological era in operational geostationary environmental satellite systems. GOES-R will provide advanced products that describe the state of the atmosphere, land, oceans, and solar/ space environments over the western hemisphere. The Harris GOES-R Ground Segment team will provide the software, based on government-supplied algorithms, and engineering infrastructures designed to produce and distribute these next-generation data products. The Harris GOES-R Team has adopted an integrated applied science and engineering approach that combines rigorous system engineering methods, with modern software design elements to facilitate the transition of algorithms for Level 1 and 2+ products to operational software. The Harris Team GOES-R GS algorithm framework, which includes a common data model interface, provides general design principles and standardized methods for developing general algorithm services, interfacing to external data, generating intermediate and L1b and L2 products and implementing common algorithm features such as metadata generation and error handling. This work presents the suite of GOES-R products, their properties and the process by which the related requirements are maintained during the complete design/development life-cycle. It also describes the algorithm architecture/engineering approach that will be used to deploy these algorithms, and provides a preliminary implementation road map for the development of the GOES-R GS software infrastructure, and a view into the integration of the framework and data model into the final design

Protein Tyrosine Phosphorylation in the Cyanobacterium Anabaena PCC 7120

Components of a protein tyrosine phosphorylation/dephosphorylation network were identified in the cyanobacterium Anabaena sp. strain PCC 7120. Three phosphotyrosine (P-Tyr) proteins of 27, 36, and 52 kDa were identified through their conspicuous immunoreactions with RC20H monoclonal antibodies specific for P-Tyr. These immunoreactions were outcompeted completely by free P-Tyr (5 mM) but not by phosphoserine or phosphothreonine. The P-Tyr content of the three major P-Tyr proteins and several minor proteins increased with their time of incubation in the presence of Mg-ATP and the protein phosphatase inhibitors sodium orthovanadate and sodium fluoride. Incubation of the same extracts with [g-32P]ATP but not [a-32P]ATP led to the phosphorylation of five polypeptides with molecular masses of 20, 27, 52, 85, and 100 kDa. Human placental protein tyrosine phosphatase 1B, with absolute specificity for P-Tyr, liberated significant quantities of 32Pi from four of the polypeptides, confirming that a portion of the protein-bound phosphate was present as 32P-Tyr. Alkaline phosphatase and the dual-specificity protein phosphatase IphP from the cyanobacterium Nostoc commune UTEX 584 also dephosphorylated these proteins and did so with greater apparent efficiency. Two of the polypeptides were partially purified, and phosphoamino analysis identified 32P-Tyr, [32P]phosphoserine, and [32P]phosphothreonine. Anabaena sp. strain PCC 7120 cell extracts contained a protein tyrosine phosphatase activity that was abolished in the presence of sodium orthovanadate and inhibited significantly by the sulfhydryl-modifying agents p-hydroxymercuriphenylsulfonic acid and p-hydroxymercuribenzoate as well as by heparin. In Anabaena sp. strain PCC 7120 the presence and/or phosphorylation status of P-Tyr proteins was influenced by incident photon flux density

PIES and CPIES Data Processing Manual

The Inverted Echo Sounder (IES) is an ocean bottom-moored instrument that measures the vertical acoustic travel time (VATT) round-trip from the seafloor to the sea surface and back. The VATT varies principally due to changes in the temperature profile of the water column, making the IES well-suited for monitoring changes in temperature structure and dynamic height (baroclinic signal). Currently, the Model 6.2, a combined IES, data-logger, and acoustic release, with measurements of bottom pressure and temperature (PIES) and optional measurements of current speed and direction (CPIES, with attached Aanderaa Doppler current sensor) is produced at URI/GSO. Data are processed in situ and are available (optional) remotely by an acoustic telemetry link. In addition to the IES-measured baroclinic signals, barotropic near-bottom pressure variations may be measured with the optional pressure sensor. A report was written in 1991 describing IES data processing [Fields et al., 1991]. Since that report, significant improvements have been made to both IES hardware and software, warranting an update of the IES data processing. The report by Kennelly et al. [2007] documents the standard processing steps contained in IESpkg 3, which has been used since the early 2000s, for IES/PIES/CPIES Models 6.1 and 6.2 at URI/GSO. More recently, IESpkg 4 was developed to allow more flexibility in the processing steps and data outputs, and to process the Fast PIES versions that sample 96 travel times each hour. This report documents the processing steps in IESpkg 4 and it repeats as much of the original text of Kennelly et al. [2007] as is still applicable. A separate document, Inverted Echo Sounder User\u27s Manual, IES Model 6.2, describes the IES hardware and instrument configuratio

2012 National Turfgrass Evaluation Program Tall Fescue Test: 2016 Data

Research efforts to improve cultivar quality include selecting for stress tolerance and disease resistance as well as finer leaf texture, a rich green color, and better sward density. Several cultivars included in the 2012 National Turfgrass Evaluation Program Tall Fescue Test performed well and showed good brown patch resistance in south central Kansas during the 2016 growing season

An Intercomparison of Four Models of Current Meter in High Current Conditions in Drake Passage

Seven current meters representing four models were placed for an 11 month deployment on a stiffly buoyed mooring to intercompare their velocity measurements: two VMCMs, two Aanderaa RCM11s, two Aanderaa SEAGUARDSs, and a Nortek Aquadopp. The current meters were placed 6 m apart from each other at about 4000 m depth in an area of Drake Passage expected to have strong near-bottom currents, that were nearly independent of depth. Two high-current events occurred in bursts of semi-diurnal pulses lasting several days, one with peak speeds up to 67 cm/s and the other above 35 cm/s. The current speed measurements all agreed within about 5% when vector-averaged over simultaneous time intervals: the full time interval (198 days) when all instruments were working, and the two high-speed events lasting 21 days and 7 days. The VMCMs, chosen as the reference measurements, were found to measure the median of the mean-current magnitudes. The RCM11 and SEAGUARD current speeds had a nearly 1:1 relationship with the median. They agreed within 2% at higher speeds (35-70 cm/s), whereas in lower speed ranges (0-35 cm/s) the vector-averaged speeds for the RCM11s and SEAGUARDS were, respectively, 4-5% lower and 3-5% higher than the median. The Aquadopp current speeds were about 7% higher than the VMCMs over the range (0-40 cm/s) encountered through their shorter common time period