Water and nitrogen processes along a typical water flowpath and streamwater exports from a forested catchment and changes after clear-cutting: a modelling study

International audienceA two dimensional model, FEMMA, to describe water and nitrogen (N) fluxes within and from a forested first-order catchment (Kangasvaara in Eastern Finland) was constructed by linking the most significant processes affecting the fluxes of water, ammonium, nitrate and dissolved organic nitrogen along a hillslope from the water divide to the stream. The hillslope represents the average flowpath of water in the catchment and the model was used to estimate the N fluxes for a catchment in eastern Finland before and after clear-cutting. The simulated results were in reasonable agreement with the nitrate, dissolved organic N and dissolved total N measurements from the study catchment and with other results in the literature. According to the simulations, the major sinks of N after clear-cutting were immobilisation by soil microbes, uptake by ground vegetation and sorption to soil. These sinks increased downslope from the clear-cut area, indicating the importance of an uncut buffer zone between the stream and the clear-cut area in reducing N exports. The buffer zone retained 76% of the N flux coming from the clear-cut area. Nitrification was a key process in controlling the N export after clear-cutting and N increases were mainly as nitrate. Most of the annual N export took place during the spring flood, when uptake of N by plants was minimal

Non-universality of elastic exponents in random bond-bending networks

We numerically investigate the rigidity percolation transition in two-dimensional flexible, random rod networks with freely rotating cross-links. Near the transition, networks are dominated by bending modes and the elastic modulii vanish with an exponent f=3.0\pm0.2, in contrast with central force percolation which shares the same geometric exponents. This indicates that universality for geometric quantities does not imply universality for elastic ones. The implications of this result for actin-fiber networks is discussed.Comment: 4 pages, 3 figures, minor clarifications and amendments. To appear in PRE Rap. Com

Optical projection tomography technique for image texture and mass transport studies in hydrogels based on gellan gum

The microstructure and permeability are crucial factors for the development of hydrogels for tissue engineering, since they influence cell nutrition, penetration and proliferation. The currently available imaging methods able to characterize hydrogels have many limitations. They often require sample drying and other destructive processing, which can change hydrogel structure, or they have limited imaging penetration depth. In this work, we show for the first time an alternative non-destructive method, based on optical projection tomography (OPT) imaging, to characterize hydrated hydrogels without the need of sample processing. As proof of concept we used gellan gum (GG) hydrogels obtained by several crosslinking methods. Transmission mode OPT was used to analyse image microtextures and emission mode OPT to study mass transport. Differences in hydrogels structure related to different types of crosslinking and between modified and native GG were found through the acquired Haralickâ s image texture features followed by multiple discriminant analysis (MDA). In mass transport studies, the mobility of FITC-dextran (MW 20, 150, 2000 kDa) was analysed through the macroscopic hydrogel. The FITC-dextran velocities were found to be inversely proportional to the size of the dextran as expected. Furthermore, the threshold size in which the transport is affected by the hydrogel mesh was found to be 150 kDa (Stokesâ radii between 69 à and 95 à ). On the other hand, the mass transport study allowed us to define an index of homogeneity to assess the crosslinking distribution, structure inside the hydrogel and repeatability of hydrogel production. As a conclusion,  we showed that  the set of OPT imaging based material characterization methods presented here are useful for screening many characteristics of hydrogel compositions in relatively short time in an inexpensive manner, providing  tools for improving the process of designing hydrogels for tissue engineering and drugs/cells delivery applications.Portuguese Foundation for Science and Technology (FCT) - Grant No. SFRH/BPD/100590/201

Optical projection tomography as a tool for 3D imaging of hydrogels

An Optical Projection Tomography (OPT) system was developed and optimized to image 3D tissue engineered products based in hydrogels. We develop pre-reconstruction algorithms to get the best result from the reconstruction procedure, which include correction of the illumination and determination of sample center of rotation (CoR). Existing methods for CoR determination based on the detection of the maximum variance of reconstructed slices failed, so we develop a new CoR search method based in the detection of the variance sharpest local maximum. We show the capabilities of the system to give quantitative information of different types of hydrogels that may be useful in its characterization.The authors thank to Tekes, Finnish Cultural Foundation, CIMO, Jane and Aatos Erkko Foundation and EXTREMA COST Action MP1207 for supporting this work

CHARACTERISATION AND IN VITRO AND IN VIVO EVALUATION OF SUPERCRITICAL-CO2-FOAMED B-TCP/PLCL COMPOSITES FOR BONE APPLICATIONS

Most synthetic bone grafts are either hard and brittle ceramics or paste-like materials that differ in applicability from the gold standard autologous bone graft, which restricts their widespread use. Therefore, the aim of the study was to develop an elastic, highly porous and biodegradable beta-tricalciumphosphate/poly(L-lactide-co-epsilon-caprolactone) (beta-TCP/PLCL) composite for bone applications using supercritical CO2 foaming. Ability to support osteogenic differentiation was tested in human adipose stem cell (hASC) culture for 21 d. Biocompatibility was evaluated for 24 weeks in a rabbit femur-defect model. Foamed composites had a high ceramic content (50 wt%) and porosity (65-67 %). After 50 % compression, in an aqueous environment at 37 degrees C, tested samples returned to 95 % of their original height. Hydrolytic degradation of beta-TCP/PLCL composite, during the 24-week follow-up, was very similar to that of porous PLCL scaffold both in vitro and in vivo. Osteogenic differentiation of hASCs was demonstrated by alkaline phosphatase activity analysis, alizarin red staining, soluble collagen analysis, immunocytochemical staining and qRT-PCR. In vitro, hASCs formed a pronounced mineralised collagen matrix. A rabbit femur defect model confirmed biocompatibility of the composite. According to histological Masson-Goldner's trichrome staining and micro-computed tomography, beta-TCP/PLCL composite did not elicit infection, formation of fibrous capsule or cysts. Finally, native bone tissue at 4 weeks was already able to grow on and in the beta-TCP/PLCL composite. The elastic and highly porous beta-TCP/PLCL composite is a promising bone substitute because it is osteoconductive and easy-to-use and mould intraoperatively.Peer reviewe

Chemical interactions in composites of gellan gum and bioactive glass: self-crosslinking and in vitro dissolution

We investigated the interactions between the organic–inorganic phases in composites and the impact on in vitro dissolution. The composite consists of a hydrogel-forming polysaccharide gellan gum (GG, organic phase) and a borosilicate bioactive glass (BAG, inorganic phase). The BAG loading in the gellan gum matrix varied from 10 to 50 wt%. While mixing GG and BAG, the ions released from BAG microparticles crosslinked with the carboxylate anions of GG. The nature of the crosslinking was assessed, and its impact on mechanical properties, swelling ratio, and enzymatic degradation profile upon immersion for up to 2 weeks was studied. Loading up to 30 wt% of BAG in GG caused an increase in mechanical properties associated with an increasing crosslinking density. At higher BAG loading, excess divalent ions and percolation of particles led to a decrease in the fracture strength and compressive modulus. Upon immersion, a decrease in the composite mechanical properties was attributed to the dissolution of the BAG and the loosening of the glass/matrix interface. The enzymatic degradation of the composites was inhibited at higher BAG loadings (40 and 50 wt%) even when the specimen was immersed for 48 h in PBS buffer with lysozyme. During in vitro dissolution in both SBF and PBS, the ions released from the glass led to the precipitation of hydroxyapatite already at day 7. In conclusion, we thoroughly discussed the in vitro stability of the GG/BAG composite and established the maximum BAG loading to enhance the GG crosslinking and mechanical properties. Based on this study, 30, 40, and 50 wt% of BAG in GG will be further investigated in an in vitro cell culture study.publishedVersionPeer reviewe

The Influence of Recent Climate Change on Tree Height Growth Differs with Species and Spatial Environment

Tree growth has been reported to increase in response to recent global climate change in controlled and semi-controlled experiments, but few studies have reported response of tree growth to increased temperature and atmospheric carbon dioxide (CO2) concentration in natural environments. This study addresses how recent global climate change has affected height growth of trembling aspen (Populus tremuloides Michx) and black spruce (Picea mariana Mill B.S.) in their natural environments. We sampled 145 stands dominated by aspen and 82 dominated by spruce over the entire range of their distributions in British Columbia, Canada. These stands were established naturally after fire between the 19th and 20th centuries. Height growth was quantified as total heights of sampled dominant and co-dominant trees at breast-height age of 50 years. We assessed the relationships between 50-year height growth and environmental factors at both spatial and temporal scales. We also tested whether the tree growth associated with global climate change differed with spatial environment (latitude, longitude and elevation). As expected, height growth of both species was positively related to temperature variables at the regional scale and with soil moisture and nutrient availability at the local scale. While height growth of trembling aspen was not significantly related to any of the temporal variables we examined, that of black spruce increased significantly with stand establishment date, the anomaly of the average maximum summer temperature between May-August, and atmospheric CO2 concentration, but not with the Palmer Drought Severity Index. Furthermore, the increase of spruce height growth associated with recent climate change was higher in the western than in eastern part of British Columbia. This study demonstrates that the response of height growth to recent climate change, i.e., increasing temperature and atmospheric CO2 concentration, did not only differ with tree species, but also their growing spatial environment