Effect of Gr Contents on Wear Properties of Al2024/MgO/Al2O3/Gr Hybrid Composites

In the present study, hybrid metal matrix composites, Al2024/10Al2O3, Al2024/10Al2O3/3MgO, Al2024/10Al2O3/6MgO, Al2024/10Al2O3/3MgO/1.5 Gr, Al2024/10Al2O3/3MgO/3Gr, and reinforcement samples (AA 2024) produced with powder metallurgy process. AA 2024 and reinforcement powders were determined mixture rations and separately mixed during 30 minutes in a three-dimensional Turbula mixer. The mixed compositions were pressed at 300 MPa and sintered at 550°C during 1 h. After that, three materials were extruded at the same temperature. Experimental results show that hybrid metal matrix composites (HMMCs) a better wear resistance than the reinforcement samples because of higher hardness. Gr behave as a lubricant during wear process. The wear resistance of HMMCs can be optimized with controlling of the reinforcement content and type. © 2018 The Authors

Photonuclear reactions with Zinc: A case for clinical linacs

The use of bremsstrahlung photons produced by a linac to induce photonuclear reactions is wide spread. However, using a clinical linac to produce the photons is a new concept. We aimed to induce photonuclear reactions on zinc isotopes and measure the subsequent transition energies and half-lives. For this purpose, a bremsstrahlung photon beam of 18 MeV endpoint energy produced by the Philips SLI-25 linac has been used. The subsequent decay has been measured with a well-shielded single HPGe detector. The results obtained for transition energies are in good agreement with the literature data and in many cases surpass these in accuracy. For the half-lives, we are in agreement with the literature data, but do not achieve their precision. The obtained accuracy for the transition energies show what is achievable in an experiment such as ours. We demonstrate the usefulness and benefits of employing clinical linacs for nuclear physics experiments

Childhood trauma, life-time self-harm, and suicidal behaviour and ideation are associated with polygenic scores for autism

Abstract: Autistic individuals experience significantly elevated rates of childhood trauma, self-harm and suicidal behaviour and ideation (SSBI). Is this purely the result of negative environmental experiences, or does this interact with genetic predisposition? In this study we investigated if a genetic predisposition for autism is associated with childhood trauma using polygenic scores (PGS) and genetic correlations in the UK Biobank (105,222 < N < 105,638), and tested potential mediators and moderators of the association between autism, childhood trauma and SSBI. Autism PGS were significantly associated with childhood trauma (max R2 = 0.096%, P < 2 × 10−16), self-harm ideation (max R2 = 0.108%, P < 2 × 10−16), and self-harm (max R2 = 0.13%, P < 2 × 10−16). Supporting this, we identified significant genetic correlations between autism and childhood trauma (rg = 0.36 ± 0.05, P = 8.13 × 10−11), self-harm ideation (rg = 0.49 ± 0.05, P = 4.17 × 10−21) and self-harm (rg = 0.48 ± 0.05, P = 4.58 × 10−21), and an over-transmission of PGS for the two SSBI phenotypes from parents to autistic probands. Male sex negatively moderated the effect of autism PGS on childhood trauma (β = −0.023 ± 0.005, P = 6.74 × 10−5). Further, childhood trauma positively moderated the effect of autism PGS on self-harm score (β = 8.37 × 10−3 ± 2.76 × 10−3, P = 2.42 × 10−3) and self-harm ideation (β = 7.47 × 10−3 ± 2.76 × 10−3, P = 6.71 × 10−3). Finally, depressive symptoms, quality and frequency of social interactions, and educational attainment were significant mediators of the effect of autism PGS on SSBI, with the proportion of effect mediated ranging from 0.23 (95% CI: 0.09–0.32) for depression to 0.008 (95% CI: 0.004–0.01) for educational attainment. Our findings identify that a genetic predisposition for autism is associated with adverse life-time outcomes, which represent complex gene-environment interactions, and prioritizes potential mediators and moderators of this shared biology. It is important to identify sources of trauma for autistic individuals in order to reduce their occurrence and impact

Acute effects of moderate and strenuous running on trace element distribution in the brain, liver, and spleen of trained rats

Objective: Trace elements such as manganese (Mn), cobalt (Co) and chromium (Cr) play key roles in metabolic reactions and are important in many physiological enzymatic processes. In this study, we aimed to investigate the acute effects of moderate and strenuous running (treadmill) exercise on the levels of Mn, Co and Cr in the brain, liver, and spleen of trained rats. Study Design: Animal experiment. Material and Methods: Twenty-one Wistar-Albino adult male rats were used in the study. Rats were grouped as control group (no mandated exercise; n=8), moderate exercise group (30 min exercise duration; n=7), and strenuous exercise group (60 min exercise duration; n=6). The levels of Mn, Co, and Cr in the frontal lobe, temporal lobe, brain stem, liver, and spleen were determined by atomic absorption spectrophotometer. Results: Cr levels in liver of rats increased in parallel to the time course of running supporting the exercise training effect on the action of insulin. Compared to the control group, the level of Co significantly decreased in the brain stem of rats in the moderate exercise group (p=0.009) and in the frontal lobe of rats in the strenuous exercise group (p=0.004). In the strenuous exercise group, an examination of the brain stem revealed that the level of Mn significantly decreased (p=0.001), and levels of Co and Cr were apparently depleted to the extent that these elements were no longer detectable. Conclusion: A notable finding is that during or after single bout strenuous exercise, levels of Co decreased in the spleen and particularly decreased in the brain stem of regularly trained rats. From this study, it can be inferred that sportsmen should aware trace element disturbances among the body parts or depletion of some trace elements after single bout of chronic strenuous running exercise. © Trakya University Faculty of Medicine

Effect of Gr Contents on Wear Properties of Al2024/MgO/Al2O3/Gr Hybrid Composites

In the present study, hybrid metal matrix composites, Al2024/10Al2O3, Al2024/10Al2O3/3MgO, Al2024/10Al2O3/6MgO, Al2024/10Al2O3/3MgO/1.5 Gr, Al2024/10Al2O3/3MgO/3Gr, and reinforcement samples (AA 2024) produced with powder metallurgy process. AA 2024 and reinforcement powders were determined mixture rations and separately mixed during 30 minutes in a three-dimensional Turbula mixer. The mixed compositions were pressed at 300 MPa and sintered at 550°C during 1 h. After that, three materials were extruded at the same temperature. Experimental results show that hybrid metal matrix composites (HMMCs) a better wear resistance than the reinforcement samples because of higher hardness. Gr behave as a lubricant during wear process. The wear resistance of HMMCs can be optimized with controlling of the reinforcement content and type. © 2018 The Authors

Experimental Investigation of B4C Particulate Reinforced Aluminium 6061 Based Composite Material in Wire-Cut EDM

In the present paper, the influences of cutting parameters on surface roughness in wire electric-discharge machining of (WEDM) process of particle-reinforced aluminium AA6061 alloy composite are investigated. The composites are produced using 15% wt. B4C fraction using powder metallurgy. Experimental trials are performed based on Taguchi L18 (21×32) with a mixed orthogonal array, and the WEDM cutting parameters are optimized for the best surface quality. The investigation results are evaluated by response surface plots and main effect graphs. The machined surface of the metal matrix composite is investigated using scanning electron microscopy (SEM) micrographs. The effect of WEDM machining variables are determined using analysis of variance (ANOVA). The analysis result shows that the most significant cutting parameter is peak current for surface roughness. The SEM and optical micrographs indicate that the reinforced B4C particles are homogeneously distributed in the matrix structure. Mathematical models are also generated using regression analysis for the surface roughness. Confirmation tests are carried out to determine the prediction performance of the mathematical models, and the surface roughness is predicted with an acceptable mean squared error.Scopu

Relationship between Pollen Counts and Weather Variables in East-Mediterranean Coast of Turkey: Does it Affect Allergic Symptoms in Pollen Allergic Children?

PubMedID: 15154617Background: Aeroallergen sampling provides information regarding the onset, duration and severity of the pollen season that clinicians use to guide allergen selection for skin testing and treatment. Objectives: This atmospheric survey reports (1) airborne pollen contributions in Adana in one-year period (2) pollen onset, duration and peak level (3) the relationship between airborne pollen and selected meteorological variables and; (4) effects on symptoms in pollen allergic children. Methods: Pollen sampling was performed with a volumetric Burkard Spore Trap. Meteorological data were measured daily from April 2001 to April 2002. Asthma symptom scores were investigated in 186 pollen allergic children that were on follow up in pediatric allergy outpatient clinics during same period. Results: Average measurements included 82.5% tree pollen, 7.7% grass pollen and 9.8% herb pollen 54 taxa were identified during one year. The most prominent tree pollens were Cupressaceae, Eucalyptus and Pinus. The most common herb was Chenopodiaceae pollen family. When airborne pollen levels were examined in relation to single meteorological conditions; daily variations in total pollen counts were not significantly correlated with any variable studied (humidity, rainfall, temperature and wind) (p > 0.05). On the other hand, statistically significant relationship between pollen concentration and symptom scores were found (p > 0.05). Positive correlations were seen between both Gramineae and Herb pollen, and humidity and rainfall from March to July. However, positive correlations were detected between tree pollen counts and temperature and humidity in May and June. Conclusion: This survey is the first volumetric airborne pollen analysis conducted in the survey area in Adana. This study suggested that the effects of weather on pollen count and symptom scores in this population could not be clearly identified with the evaluation of one-year data. However, pollen counts had effect on allergic symptoms in pollen allergic children. Examination of the complex interaction of multiple whether parameters would perhaps more fully elucidate the relationship between meteorology and aerobiology and provide the clinician with information necessary to forecast pollen prevalence. An awareness of the ever chancing, local aeroallergen patterns requires regular monitoring. Such awareness serves as a useful guide in the effective testing and treatment of atopic patients