Ytterbium doped nano-crystalline optical fiber for reduced photodarkening

We report suppression of photodarkening in Yb-doped nano-crystalline fibers in silica host. The photodarkening induced loss reduced by 20 times compared to Yb-doped aluminosilicate fibers. The laser efficiency of the nano-crystalline fiber was 79%

Optical fiber fabrication using novel gas-phase deposition technique

We report a highly versatile chemical-in-crucible preform fabrication technique suitable for gas-phase deposition of doped optical fibers. Aluminosilicate and ytterbium-doped phosphosilicate fibers are presented demonstrating the technique and its potential for realizing complex fiber designs that are suitable for the next generation of high-power fiber devices. The results show aluminum-doped fiber with numerical aperture of 0.28 and ytterbium-doped fiber with a measured slope efficiency of 84% with respect to pump launch power

Multi-wavelength fiber laser with erbium doped zirconia fiber and semiconductor optical amplifier

Multi-wavelength hybrid fiber lasers are demonstrated in both ring and linear cavities using a fabricated Erbium-doped Zirconia fiber (EDZF) and semiconductor optical amplifier (SOA) as gain media. In both configurations, the a fiber loop mirror, which is constructed using a 3 m long polarization maintaining fiber (PMF) and a polarization insensitive 3dB coupler is used as a comb filter for the fiber laser. In the ring cavity, 10 simultaneous lines with peak power above -26 dBm is obtained at 1550 nm region. This is an improvement compared to the linear cavity configuration which has only 5 simultaneous lines observed from wavelength 1556.1 nm to 1563.0 nm with the peak power above -40 dBm. Both hybrid lasers has a constant line spacing of 1.7 nm, which is suitable for wavelength division multiplexing and sensing applications and shows a stable operation at room temperature

Feasibility studies for the measurement of time-like proton electromagnetic form factors from p¯ p→ μ+μ- at P ¯ ANDA at FAIR

This paper reports on Monte Carlo simulation results for future measurements of the moduli of time-like proton electromagnetic form factors, | GE| and | GM| , using the p¯ p→ μ+μ- reaction at P ¯ ANDA (FAIR). The electromagnetic form factors are fundamental quantities parameterizing the electric and magnetic structure of hadrons. This work estimates the statistical and total accuracy with which the form factors can be measured at P ¯ ANDA , using an analysis of simulated data within the PandaRoot software framework. The most crucial background channel is p¯ p→ π+π-, due to the very similar behavior of muons and pions in the detector. The suppression factors are evaluated for this and all other relevant background channels at different values of antiproton beam momentum. The signal/background separation is based on a multivariate analysis, using the Boosted Decision Trees method. An expected background subtraction is included in this study, based on realistic angular distributions of the background contribution. Systematic uncertainties are considered and the relative total uncertainties of the form factor measurements are presented

Study of doubly strange systems using stored antiprotons

Bound nuclear systems with two units of strangeness are still poorly known despite their importance for many strong interaction phenomena. Stored antiprotons beams in the GeV range represent an unparalleled factory for various hyperon-antihyperon pairs. Their outstanding large production probability in antiproton collisions will open the floodgates for a series of new studies of systems which contain two or even more units of strangeness at the P‾ANDA experiment at FAIR. For the first time, high resolution γ-spectroscopy of doubly strange ΛΛ-hypernuclei will be performed, thus complementing measurements of ground state decays of ΛΛ-hypernuclei at J-PARC or possible decays of particle unstable hypernuclei in heavy ion reactions. High resolution spectroscopy of multistrange Ξ−-atoms will be feasible and even the production of Ω−-atoms will be within reach. The latter might open the door to the |S|=3 world in strangeness nuclear physics, by the study of the hadronic Ω−-nucleus interaction. For the first time it will be possible to study the behavior of Ξ‾+ in nuclear systems under well controlled conditions

Bismuth doped fiber laser performance on effective fiber cooling

In the past, bismuth doped fiber (BiDF) lasers, operating in the 1160-1300 nm wavelength range, have gained much attention as they are promising for many applications; including medical and astronomy. However, the poor lasing efficiency of BiDF laser, compared to the widely used rare-earth doped fiber lasers, requires further investigations. One possible reason that can impair the BiDF laser efficiency is the presence of high unsaturable loss in the fiber, which is temperature dependent. Thus, temperature rise in the BiDF under strong pumping can be a limiting factor for such laser systems. Here, we report the dependence of BiDF laser efficiency on effective cooling of the fiber

Bismuth doped fibres for near-infrared light sources: progress and prospects

The luminescence properties of Bi-doped silica fibres in the near-infrared region are discussed. Bi-doped fibre lasers and amplifiers and their dependence on the unsaturable loss and excited state absorption are also discussed

Excited state absorption measurement in bismuth-doped silicate fibers for use in 1160nm fiber laser

Bi-doped fiber lasers (BiDFLs) demonstrated so far have been limited to 1080 nm pumping band at which high power laser diodes (LDs) are not readily available. [1,2] Direct LD pumping will make the BiDFLs more compact and cost-effective. Pumping wavelengths at 915 nm and 976 nm are interesting because they well overlap with the absorption band of the Bi-doped fibers (BiDFs). Here, we investigate feasibility of the 915 nm and 976 nm pumping band in addition to 1080 nm pumping by measuring excited state absorption (ESA) in BiDFs

Multi-watts narrow-linewidth all fiber Yb-doped laser operating at 1179 nm

An all-fiber, narrow-linewidth, high power Yb-doped silica fiber laser at 1179 nm has been demonstrated. More than 12 W output power has been obtained, corresponding to a slope efficiency of 43% with respect to launched pump power, by core-pumping at 1090 nm. In order to increase the pump absorption, the Yb-doped fiber was heated up to 125°C. At the maximum output power, the suppression of amplified spontaneous emission was more than 50 dB. Furthermore, theoretical work confirms that the proposed laser architecture can be easily scaled to higher power