Influence of Lithium Vacancy Defects on Tritium Diffusion in β-Li2TiO3

Lithium metatitanate, Li2TiO3, is a leading candidate for application as a tritium breeding material in a future fusion reactor. Following transmutation of lithium, the tritium must escape the crystal in order to be extracted for use in the fusion plasma. The rate-limiting step to release tritium from the Li2TiO3 pebbles is diffusion through the crystal grains. In this work, the activation barriers for tritium diffusion have been calculated using density functional theory. The results show that tritium can diffuse as an interstitial with a barrier of 0.52 eV. However, when a tritium ion becomes bound to a lithium vacancy defect, the energy required to either detrap the tritium from the vacancy or for the cluster to diffuse increases to >1 eV. Overall, these results suggest that the introduction of lithium vacancies due to Li burn-up may lead to an increase in tritium retention in the pebbles. Copyright © 2020 American Chemical Society

Studies on buried layer resistors

Multilayer thick-film technology is one of the important technologies adopted in the miniaturization of electronic systems. Generally, only interconnections are made in the intermediate layers. The possibility of fabricating resistors along with interconnections in the buried layers/intermediate layers using conventional thick-film materials has been examined in this study. The fabrication has been carried out by processing layer after layer. It has been found that the buried layer resistors exhibited a sheet resistivity lower than those fabricated as open resistors. This change in sheet resistivity has been attributed to multiple firings that the resistors undergo during the fabrication. This reduction in sheet resistivity has been found to be due to segregation of active materials. A model has been proposed to explain this change in sheet resistivity through segregation of the active material. The work reported in the paper clearly indicates that buried resistors with consistent values (+/-10%) can be fabricated using conventional materials. However, the design of the resistors has to be carried out using modified sheet resistivities. The model that is proposed also indicates how one can make a paste that is likely to exhibit the same sheet resistivity for buried resistors and open resistors. (C) 2002 Kluwer Academic Publishers

The forward physics facility at the high-luminosity LHC

High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe standard model (SM) processes and search for physics beyond the standard model (BSM). In this report, we review the status of the civil engineering plans and the experiments to explore the diverse physics signals that can be uniquely probed in the forward region. FPF experiments will be sensitive to a broad range of BSM physics through searches for new particle scattering or decay signatures and deviations from SM expectations in high statistics analyses with TeV neutrinos in this low-background environment. High statistics neutrino detection will also provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. We report here on these physics topics, on infrastructure, detector, and simulation studies, and on future directions to realize the FPF's physics potential

The ATLAS trigger system for LHC Run 3 and trigger performance in 2022

The ATLAS trigger system is a crucial component of the ATLAS experiment at the LHC. It is responsible for selecting events in line with the ATLAS physics programme. This paper presents an overview of the changes to the trigger and data acquisition system during the second long shutdown of the LHC, and shows the performance of the trigger system and its components in the proton-proton collisions during the 2022 commissioning period as well as its expected performance in proton-proton and heavy-ion collisions for the remainder of the third LHC data-taking period (2022–2025)

Search for the Zγ decay mode of new high-mass resonances in pp collisions at √s = 13 TeV with the ATLAS detector

This letter presents a search for narrow, high-mass resonances in the Zγ final state with the Z boson decaying into a pair of electrons or muons. The √s = 13 TeV pp collision data were recorded by the ATLAS detector at the CERN Large Hadron Collider and have an integrated luminosity of 140 fb−1. The data are found to be in agreement with the Standard Model background expectation. Upper limits are set on the resonance production cross section times the decay branching ratio into Zγ. For spin-0 resonances produced via gluon–gluon fusion, the observed limits at 95% confidence level vary between 65.5 fb and 0.6 fb, while for spin-2 resonances produced via gluon–gluon fusion (or quark–antiquark initial states) limits vary between 77.4 (76.1) fb and 0.6 (0.5) fb, for the mass range from 220 GeV to 3400 GeV

Inclusive-photon production and its dependence on photon isolation in pp collisions at s√ = 13 TeV using 139 fb−1 of ATLAS data

Measurements of differential cross sections are presented for inclusive isolated-photon production in pp collisions at a centre-of-mass energy of 13 TeV provided by the LHC and using 139 fb−1 of data recorded by the ATLAS experiment. The cross sections are measured as functions of the photon transverse energy in different regions of photon pseudorapidity. The photons are required to be isolated by means of a fixed-cone method with two different cone radii. The dependence of the inclusive-photon production on the photon isolation is investigated by measuring the fiducial cross sections as functions of the isolation-cone radius and the ratios of the differential cross sections with different radii in different regions of photon pseudorapidity. The results presented in this paper constitute an improvement with respect to those published by ATLAS earlier: the measurements are provided for different isolation radii and with a more granular segmentation in photon pseudorapidity that can be exploited in improving the determination of the proton parton distribution functions. These improvements provide a more in-depth test of the theoretical predictions. Next-to-leading-order QCD predictions from JETPHOX and SHERPA and next-to-next-to-leading-order QCD predictions from NNLOJET are compared to the measurements, using several parameterisations of the proton parton distribution functions. The measured cross sections are well described by the fixed-order QCD predictions within the experimental and theoretical uncertainties in most of the investigated phase-space region

Search for lepton-favour violation in high-mass dilepton final states using 139 fb−1 of pp collisions at √s = 13 TeV with the ATLAS detector

A search is performed for a heavy particle decaying into different-flavour, dilepton final states, using 139 fb−1 of proton-proton collision data at √s = 13 TeV collected in 2015–2018 by the ATLAS detector at the Large Hadron Collider. Final states with electrons, muons and hadronically decaying tau leptons are considered (eμ, eτ or μτ). No significant excess over the Standard Model predictions is observed. Upper limits on the production cross-section are set as a function of the mass of a Z′ boson, a supersymmetric τ-sneutrino, and a quantum black-hole. The observed 95% CL lower mass limits obtained on a typical benchmark model Z′ boson are 5.0 TeV (eμ), 4.0 TeV (eτ), and 3.9 TeV (μτ), respectively

Charged-hadron production in pp, p+Pb, Pb+Pb, and Xe+Xe collisions at sNN−−−√ = 5 TeV with the ATLAS detector at the LHC

This paper presents measurements of charged-hadron spectra obtained in pp, p+Pb, and Pb+Pb collisions at s√ or sNN−−−√ = 5.02 TeV, and in Xe+Xe collisions at sNN−−−√ = 5.44 TeV. The data recorded by the ATLAS detector at the LHC have total integrated luminosities of 25 pb−1, 28 nb−1, 0.50 nb−1, and 3 μb−1, respectively. The nuclear modification factors RpPb and RAA are obtained by comparing the spectra in heavy-ion and pp collisions in a wide range of charged-particle transverse momenta and pseudorapidity. The nuclear modification factor RpPb shows a moderate enhancement above unity with a maximum at pT ≈ 3 GeV; the enhancement is stronger in the Pb-going direction. The nuclear modification factors in both Pb+Pb and Xe+Xe collisions feature a significant, centrality-dependent suppression. They show a similar distinct pT-dependence with a local maximum at pT ≈ 2 GeV and a local minimum at pT ≈ 7 GeV. This dependence is more distinguishable in more central collisions. No significant |η|-dependence is found. A comprehensive comparison with several theoretical predictions is also provided. They typically describe RAA better in central collisions and in the pT range from about 10 to 100 GeV

Search for single production of vector-like T quarks decaying into Ht or Zt in pp collisions at s√ = 13 TeV with the ATLAS detector

This paper describes a search for the single production of an up-type vector-like quark (T) decaying as T → Ht or T → Zt. The search utilises a dataset of pp collisions at s√ = 13 TeV collected with the ATLAS detector during the 2015–2018 data-taking period of the Large Hadron Collider, corresponding to an integrated luminosity of 139 fb−1. Data are analysed in final states containing a single lepton with multiple jets and b-jets. The presence of boosted heavy resonances in the event is exploited to discriminate the signal from the Standard Model background. No significant excess above the Standard Model expectation is observed, and 95% CL upper limits are set on the production cross section of T quarks in different decay channels. The results are interpreted in several benchmark scenarios to set limits on the mass and universal coupling strength (κ) of the vector-like quark. For singlet T quarks, κ values above 0.53 are excluded for all masses below 2.3 TeV. At a mass of 1.6 TeV, κ values as low as 0.35 are excluded. For T quarks in the doublet scenario, where the production cross section is much lower, κ values above 0.72 are excluded for all masses below 1.7 TeV, and this exclusion is extended to κ above 0.55 for low masses around 1.0 TeV