301,246 research outputs found
Recommended from our members
Fabrication of a high sensitive Ag-nanoparticle substrate and its application to the detection of toxic substances
Surface Enhanced Raman Scattering (SERS) is typically observed with the substrate in a liquid medium and it has been proposed as a promising technique for detecting low levels of pollutants in liquids. A technique is presented for self-assembly to immobilize Ag nanoparticles (Ag-NPs), with diameters ranging from 100 to 800nm on a solid support. Experimental results have been obtained through experiments using Ag-NPs active substrates to detect Rhodamine 6G (R6G) and crystal violet in the deionized water. Further, the SERS spectrum and Raman spectrum of phoxim were also measured, showing the enhancement in the performance of the active substrate as a result
Symmetric Composite Laminate Stress Analysis
It is demonstrated that COSMIC/NASTRAN may be used to analyze plate and shell structures made of symmetric composite laminates. Although general composite laminates cannot be analyzed using NASTRAN, the theoretical development presented herein indicates that the integrated constitutive laws of a symmetric composite laminate resemble those of a homogeneous anisotropic plate, which can be analyzed using NASTRAN. A detailed analysis procedure is presented, as well as an illustrative example
Recommended from our members
TDLAS Detection of propane and butane gas over the near-infrared wavelength range from 1678nm to 1686nm
It is important in the petrochemical industry that there are high sensitivity, high accuracy, low-power consumption and intrinsically safe methods for the detection of propane, butane and their gas mixtures, to provide early warning of potential explosion hazards during both storage and transportation of oil and gas. This paper proposes a 'proof of principle' method for the detection of propane and butane using a Tunable Diode Laser Absorption Spectroscopy (TDLAS) technique over the near-infrared wavelength range from 1678nm to 1686nm. This method is relatively inexpensive to implement and is thus more practical, compared with detection methods using wavelengths further into the infra-red, near 3.3μm. The minimum detectable concentration was found to be low as 300ppm for propane or butane. Importantly, the relative measurement errors were all below 3% LEL, which meets the requirements from the petrochemical and oil-gas storage and transportation industries for a field-based system for monitoring of combustible gases
The possible role of stellar mergers for the formation of multiple stellar populations in globular clusters
Many possible scenarios for the formation of multiple stellar populations (MSP) in globular clusters (GCs) have been discussed so far, including the involvement of asymptotic giant branch stars, fast rotating main sequence stars, very massive main sequence stars and mass-transferring massive binaries based on stellar evolution modelling. But self-consistent, dynamical simulations of very young GCs are usually not considered. In this work, we perform direct -body modelling such systems with total masses up to M, taking into account the observationally constrained primordial binary properties, and discuss the stellar-mergers driven both by binary stellar evolution and dynamical evolution of GCs. The occurrence of stellar mergers is enhanced significantly in binary-rich clusters such that stars forming from the gas polluted by mergers-driven ejection/winds would appears as MSPs. We thus emphasize that stellar mergers can be an important process that connects MSP formation with star cluster dynamics, and that multiple MSP formation channels can naturally work together. The scenario studied here, also in view of a possible top-heavy IMF, may be particularly relevant for explaining the high mass fraction of MSPs (the mass budget problem) and the absence of MSPs in young and low-mass star clusters
Recommended from our members
A Sensitive and Reliable Carbon Monoxide Monitor for Safety-Focused Applications in Coal Mine Using a 2.33- m Laser Diode
In this paper, a stable and reliable carbon monoxide (CO) monitoring system with high sensitivity (at sub-ppm level) was designed and demonstrated with particular reference to use in the mining industry, tailoring the design specifically for forecasting spontaneous combustion, a major hazard to miners. An appropriate strong CO absorption line was used to minimize the interferences expected from gases present in ambient air, with several preferred CO absorption lines selected and investigated, therefore choosing a distributed feedback (DFB) laser operating at a wavelength of 2330.18 nm as the excitation source. Through a detailed investigation, a minimum detection limit of ~0.2 ppm and a measurement precision of <50 ppb were achieved with a 1 s averaging time. Further in tests, a long-term continuous monitoring evaluation was carried out, demonstrated the excellent stability and reliability of the developed CO monitor. The results obtained have validated the potential of this design of a CO monitoring system for practical monitoring applications underground to enhance safety in the mining industry
Radiation transport equations in non-Riemannian space-times
The transport equations for polarized radiation transfer in non-Riemannian,
Weyl-Cartan type space-times are derived, with the effects of both torsion and
non-metricity included. To obtain the basic propagation equations we use the
tangent bundle approach. The equations describing the time evolution of the
Stokes parameters, of the photon distribution function and of the total
polarization degree can be formulated as a system of coupled first order
partial differential equations. As an application of our results we consider
the propagation of the cosmological gamma ray bursts in spatially homogeneous
and isotropic spaces with torsion and non-metricity. For this case the exact
general solution of the equation for the polarization degree is obtained, with
the effects of the torsion and non-metricity included. The presence of a
non-Riemannian geometrical background in which the electromagnetic fields
couple to torsion and/or non-metricity affect the polarization of photon beams.
Consequently, we suggest that the observed polarization of prompt cosmological
gamma ray bursts and of their optical afterglows may have a propagation effect
component, due to a torsion/non-metricity induced birefringence of the vacuum.
A cosmological redshift and frequency dependence of the polarization degree of
gamma ray bursts also follows from the model, thus providing a clear
observational signature of the torsional/non-metric effects. On the other hand,
observations of the polarization of the gamma ray bursts can impose strong
constraints on the torsion and non-metricity and discriminate between different
theoretical models.Comment: 12 pages, 3 figures, accepted for publication in PR
Recommended from our members
Enhanced Raman Detection System based on a Hollow-core Fiber Probe design
This paper focus on an enhanced Raman-based detection probe and its performance evaluated. The probe employs a hollow-core fiber design to allow liquid micro-sample to be analyzed. The hollow-core fiber is used both to transmit the light signal used to excite the sample and to collect the Raman scattering signal received from the micro-sample under analysis. In order to maximize the performance of the system, various parameters have been studied experimentally, including the diameter and the height of the liquid sample in the probe. The aim has been optimizing both as a means to enhance the Raman scattering signal received from the liquid sample. As a result, a Raman-based detection probe using a reflector approach was developed and evaluated. This design enabling a greater area for interaction with the sample to be formed and to concentrate the excitation light into it. This then increases the efficiency of the light-liquid interaction and improves the collection efficiently of the forward Raman scattering light signal. With the use of this design, the detected Raman scattering signal was increased by a factor of 103~104 over what otherwise would be achieved. A key feature is that with the use of a hollow-core fiber to collect the liquid sample, only a very small volume is needed, making this well suited to practical applications where limited amounts of material are available e.g. biofluids or high value liquids. The system designed and evaluated thus provides the basis of an effective all-fiber Raman-based detection system, capable of being incorporated into portable analysis equipment for rapid detection and in-the-field use
- …