A laboratory investigation of the variability of cloud reflected radiance fields

A method to determine the radiative properties of complex cloud fields was developed. A Cloud field optical simulator (CFOS) was constructed to simulate the interaction of cloud fields with visible radiation. The CFOS was verified by comparing experimental results from it with calculations performed with a Monte Carlo radiative transfer model. A software library was developed to process, reduce, and display CFOS data. The CFSOS was utilized to study the reflected radiane patterns from simulated cloud fields

Porous squeeze-film flow

The squeeze-film flow of a thin layer of Newtonian fluid filling the gap between a flat impermeable surface moving under a prescribed constant load and a flat thin porous bed coating a stationary flat impermeable surface is considered. Unlike in the classical case of an impermeable bed, in which an infinite time is required for the two surfaces to touch, for a porous bed contact occurs in a finite contact time. Using a lubrication approximation an implicit expression for the fluid layer thickness and an explicit expression for the contact time are obtained and analysed. In addition, the fluid particle paths are calculated, and the penetration depths of fluid particles into the porous bed are determined. In particular, the behaviour in the asymptotic limit of small permeability, in which the contact time is large but finite, is investigated. Finally, the results are interpreted in the context of lubrication in the human knee joint, and some conclusions are drawn about the contact time of the cartilage-coated femoral condyles and tibial plateau and the penetration of nutrients into the cartilage

Squeeze-Film Flow in the Presence of a Thin Porous Bed, with Application to the Human Knee Joint

Motivated by the desire for a better understanding of the lubrication of the human knee joint, the squeeze-film flow of a thin layer of Newtonian fluid (representing the synovial fluid) filling the gap between a flat impermeable surface (representing the femoral condyles) and a flat thin porous bed (representing the articular cartilage) coating a stationary flat impermeable surface (representing the tibial plateau) is considered. As the impermeable surface approaches the porous bed under a prescribed constant load all of the fluid is squeezed out of the gap in a finite contact time. In the context of the knee, the size of this contact time suggests that when a person stands still for a short period of time their knees may be fluid lubricated, but that when they stand still for a longer period of time contact between the cartilage-coated surfaces may occur. The fluid particle paths are calculated, and the penetration depths of fluid particles into the porous bed are determined. In the context of the knee, these penetration depths provide a measure of how far into the cartilage nutrients are carried by the synovial fluid, and suggest that when a person stands still nutrients initially in the fluid layer penetrate only a relatively small distance into the cartilage. However, the model also suggests that the cumulative effect of repeated loading and unloading of the knees during physical activity such as walking or running may be sufficient to carry nutrients deep into the cartilage

Quality of life and building design in residential and nursing homes for older people

Older people living in residential and nursing care homes spend a large proportion of their time within the boundaries of the home, and may depend on the environment to compensate for their physical or cognitive frailties. Regulations and guidelines on the design of care buildings have accumulated over time with little knowledge of their impact on the quality of life of building users. The Design in Caring Environments Study (DICE) collected cross-sectional data on building design and quality of life in 38 care homes in and near Sheffield, Yorkshire. Quality of life was assessed using methods which included all residents regardless of their frailty, and staff morale was also assessed. The physical environment was measured on 11 user-related domains using a new tool, the Sheffield Care Environment Assessment Matrix (SCEAM). Significant positive associations were found between several aspects of the built environment and the residents' quality of life. There was evidence that a focus on safety and health requirements could be creating risk-averse environments which act against quality of life, particularly for the least frail residents. Staff morale was associated with attributes of a non-institutional environment for residents rather than with the facilities provided for the staff. The new tool for assessing building design has potential applications in further research and for care providers

Improving continence services for older people from the service-providers' perspective: a qualitative interview study

This is an Open Access article distributed in accordance with the Creative Commons Attribution Non Commercial (CC BY-NC 3.0) license, which permits others to distribute, remix, adapt, build upon this work non-commercially, and license their derivative works on different terms, provided the original work is properly cited and the use is non-commercial.Objective To examine in depth the views and experiences of continence service leads in England on key service and continence management characteristics in order to identify and to improve our understanding of barriers to a good-quality service and potential facilitators to develop and to improve services for older people with urinary incontinence (UI). Design Qualitative semistructured interviews using a purposive sample recruited across 16 continence services. Setting 3 acute and 13 primary care National Health Service Trusts in England. Participants 16 continence service leads in England actively treating and managing older people with UI. Results In terms of barriers to a good-quality service, participants highlighted a failure on the part of commissioners, managers and other health professionals in recognising the problem of UI and in acknowledging the importance of continence for older people and prevalent negative attitudes towards continence and older people. Patient assessment and continence promotion regardless of age, rather than pad provision, were identified as important steps for a good-quality service for older people with UI. More rapid and appropriate patient referral pathways, investment in service capacity, for example, more trained staff and strengthened interservice collaborations and a higher profile within medical and nurse training were specified as being important facilitators for delivering an equitable and high-quality continence service. There is a need, however, to consider the accounts given by our participants as perhaps serving the interests of their professional group within the context of interprofessional work. Conclusions Our data point to important barriers and facilitators of a good-quality service for older people with UI, from the perspective of continence service leads. Further research should address the views of other stakeholders, and explore options for the empirical evaluation of the effectiveness of identified service facilitators.Funding was received from the New Dynamics of Ageing Programme, led by the Economic & Social Research Council, UK (grantnumber RES-353-25-0010)

A laboratory investigation of the reflective properties of simulated, optically thick clouds

The Cloud Field Optical Simulator project includes work in the following areas: (1) improvement in the shape of the desired (visible) spectral response of the measurement, (2) selection of two usable materials for cloud simulation, (3) a means of assigning a visible optical depth to the simulated clouds, and (4) confirmation that the apparatus is capable of detecting basic finite cloud characteristics. A brief description of the accomplishments in each of these areas is presented

Ethical issues in qualitative research addressing sensitive issues with children and young people

How do adults understand youth? How do their conceptions inform interventions into young lives or involve young people's experiences? This volume tackles these questions by exploring adults' ideas about youth

Post-Foucauldian governmentality: what does it offer critical social policy analysis?

This article considers the theoretical perspective of post-Foucauldian governmentality, especially the insights and challenges it poses for applied researchers within the critical social policy tradition. The article firstly examines the analytical strengths of this approach to understanding power and rule in contemporary society, before moving on to consider its limitations for social policy. It concludes by arguing that these insights can be retained, and some of the weaknesses overcome, by adopting a ‘realist governmentality’ approach (Stenson 2005, 2008). This advocates combining traditional discursive analysis with more ethnographic methods in order to render visible the concrete activity of governing, and unravel the messiness, complexity and unintended consequences involved in the struggles around subjectivity

Squeeze-film flow between a curved impermeable bearing and a flat porous bed

Axisymmetric squeeze-film flow in the thin gap between a stationary flat thin porous bed and a curved impermeable bearing moving under a prescribed constant load is analysed. The unsteady Reynolds equation is formulated and solved for the fluid pressure. This solution is used to obtain the time for the minimum fluid layer thickness to reduce to a given value, and, in particular, the finite time for the bearing and the bed to come into contact. The effect of varying the shape of the bearing and the permeability of the layer is investigated, and, in particular, it is found that both the contact time and the fluid pressure behave qualitatively differently for beds with small and large permeabilities. In addition, the paths of fluid particles initially situated in both the fluid layer and the porous bed are calculated. In particular, it is shown that, unlike in the case of a flat bearing, for a curved bearing there are fluid particles, initially situated in the fluid layer, that flow from the fluid layer into the porous bed and then re-emerge into the fluid layer, and the region in which these fluid particles are initially situated is determined