In situ measurement of the acoustic performance of a full scale tramway low height noise barrier prototype

International audienceThe performance of a full scale low height barrier prototype meant to attenuate tramway noise is measured in situ. The prototype is made of a simple L-shape assembly of pressed wood boards covered on the source side with fibrous absorbing material, and has been set up temporarily in a residential area in the town of Saint-Martin-d'H` eres, near Grenoble, through which a tramway line passes. A series of pass-by measurements were made at a close receiver location corresponding to the typical height of human ears, with and without the device. The tram speed has been measured as well using an auxiliary microphone located very close to the track. A significant variability in pass-by levels has been found between the different trams, even when applying an approximate correction for speed. However it is shown that the barrier provides on average an attenuation of more than 10 dB(A), during the whole pass-by. Spectral analysis of the recorded signals is carried out as well to estimate the barrier insertion loss more accurately. Furthermore, comparisons between measurements and simplistic BEM calculations show that numerical predictions can yield rather good estimates of the actual in situ performance, within a few dB(A)

Building Information Modelling (BIM) value realisation framework for asset owners

The paper is presenting a value realisation framework for asset owners based on an exploratory study. The study is descriptive in nature and adopting a qualitative approach towards data collection. The paper adopts the viewpoint of BIM business value measurement considering that; (i) if the process is better as a result of BIM-based processes, then it is different in some relevant way; (ii) if it is different in some relevant way as a result of certain BIM properties or characteristics, then the change is observable; (iii) if the change is observ-able because of certain direct BIM benefits, then it is countable; (iv) if it is countable using defined measurement metrics, then it is measurable; (v) if it is measurable using established measurement techniques, an organisation can value each unit and therefore, realise the benefits of BIM. The specific contribution of paper is to improve asset owners’ understanding of BIM-business value measurement techniques and approaches

Visible photodissociation spectroscopy of PAH cations and derivatives in the PIRENEA experiment

The electronic spectra of gas-phase cationic polycyclic aromatic hydrocarbons (PAHs), trapped in the Fourier Transform Ion Cyclotron Resonance cell of the PIRENEA experiment, have been measured by multiphoton dissociation spectroscopy in the 430-480 nm spectral range using the radiation of a mid-band optical parametric oscillator laser. We present here the spectra recorded for different species of increasing size, namely the pyrene cation (C16H10+), the 1-methylpyrene cation (CH3-C16H9+), the coronene cation (C24H12+), and its dehydrogenated derivative C24H10+. The experimental results are interpreted with the help of time-dependent density functional theory calculations and analysed using spectral information on the same species obtained from matrix isolation spectroscopy data. A kinetic Monte Carlo code has also been used, in the case of pyrene and coronene cations, to estimate the absorption cross-sections of the measured electronic transitions. Gas-phase spectra of highly reactive species such as dehydrogenated PAH cations are reported for the first time

Evaluation of residence time on nitrogen oxides removal in non-thermal plasma reactor

Non-thermal plasma (NTP) has been introduced over the last few years as a promising after- treatment system for nitrogen oxides and particulate matter removal from diesel exhaust. NTP technology has not been commercialised as yet, due to its high rate of energy consumption. Therefore, it is important to seek out new methods to improve NTP performance. Residence time is a crucial parameter in engine exhaust emissions treatment. In this paper, different electrode shapes are analysed and the corresponding residence time and NOx removal efficiency are studied. An axisymmetric laminar model is used for obtaining residence time distribution numerically using FLUENT software. If the mean residence time in a NTP plasma reactor increases, there will be a corresponding increase in the reaction time and consequently the pollutant removal efficiency increases. Three different screw thread electrodes and a rod electrode are examined. The results show the advantage of screw thread electrodes in comparison with the rod electrode. Furthermore,between the screw thread electrodes, the electrode with the thread width of 1 mm has the highest NOx removal due to higher residence time and a greater number of micro-discharges. The results show that the residence time of the screw thread electrode with a thread width of 1 mm is 21% more than for the rod electrode

Hydrogen dissociation of naphthalene cations: a theoretical study

We present the computational results of removing mono and di-hydrogen atoms from the naphthalene cation. Calculations are performed at the B3LYP level with an extended basis. Two channels are studied, -H and -H2, and these processes are discussed within the frame of photodissociation of PAHs in the interstellar medium.