Dynamic topography produced by lower crustal flow against rheological strength heterogeneities bordering the Tibetan Plateau

Dynamic stresses developed in the deep crust as a consequence of flow of weak lower crust may explain anomalously high topography and extensional structures localized along orogenic plateau margins. With lubrication equations commonly used to describe viscous flow in a thin-gap geometry, we model dynamic stresses associated with the obstruction of lower crustal channel flow due to rheological heterogeneity. Dynamic stresses depend on the mean velocity (Ū), viscosity (µ) and channel thickness (h), uniquely through the term µŪ/h^2. These stresses are then applied to the base of an elastic upper crust and the deflection of the elastic layer is computed to yield the predicted dynamic topography. We compare model calculations with observed topography of the eastern Tibetan Plateau margin where we interpret channel flow of the deep crust to be inhibited by the rigid Sichuan Basin. Model results suggest that as much 1500 m of dynamic topography across a region of several tens to a hundred kilometres wide may be produced for lower crustal material with a viscosity of 2 × 10^(18) Pa s flowing in a 15 km thick channel around a rigid cylindrical block at an average rate of 80 mm yr^(−1)

Thermal delay of drop coalescence

We present the results of a combined experimental and theoretical study of drop coalescence in the presence of an initial temperature difference T[subscript 0] between a drop and a bath of the same liquid. We characterize experimentally the dependence of the residence time before coalescence on T[subscript 0] for silicone oils with different viscosities. Delayed coalescence arises above a critical temperature difference T[subscript c] that depends on the fluid viscosity: for T[subscript 0] > T[subscript c], the delay time increases T[subscript 0] [superscript 2/3] as for all liquids examined. This observed dependence is rationalized theoretically through consideration of the thermocapillary flows generated within the drop, the bath and the intervening air layer.National Science Foundation (U.S.) (Grant CMMI-1727565)National Science Foundation (U.S.) (Grant DMS-1614043

Optimal concentrations in transport systems

Many biological and man-made systems rely on transport systems for the distribution of material, for example matter and energy. Material transfer in these systems is determined by the flow rate and the concentration of material. While the most concentrated solutions offer the greatest potential in terms of material transfer, impedance typically increases with concentration, thus making them the most difficult to transport. We develop a general framework for describing systems for which impedance increases with concentration, and consider material flow in four different natural systems: blood flow in vertebrates, sugar transport in vascular plants and two modes of nectar drinking in birds and insects. The model provides a simple method for determining the optimum concentration c[subscript opt] in these systems. The model further suggests that the impedance at the optimum concentration μ[subscript opt] may be expressed in terms of the impedance of the pure (c = 0) carrier medium μ[subscript 0] as μ[subscript opt]∼2[superscript α]μ[subscript 0], where the power α is prescribed by the specific flow constraints, for example constant pressure for blood flow (α = 1) or constant work rate for certain nectar-drinking insects (α = 6). Comparing the model predictions with experimental data from more than 100 animal and plant species, we find that the simple model rationalizes the observed concentrations and impedances. The model provides a universal framework for studying flows impeded by concentration, and yields insight into optimization in engineered systems, such as traffic flow.National Science Foundation (U.S.) (Grant 1021779)National Science Foundation (U.S.) (Grant DMS-0907955)National Science Foundation (U.S.). Materials Research Science and Engineering Centers (Program) (Grant DMR-0820484

Theology, News and Notes - Vol. 14, No. 01

Theology News & Notes was a theological journal published by Fuller Theological Seminary from 1954 through 2014.https://digitalcommons.fuller.edu/tnn/1028/thumbnail.jp

Dynamic topography produced by lower crustal flow against rheological strength heterogeneities bordering the Tibetan Plateau

Dynamic stresses developed in the deep crust as a consequence of flow of weak lower crust may explain anomalously high topography and extensional structures localized along orogenic plateau margins. With lubrication equations commonly used to describe viscous flow in a thin-gap geometry, we model dynamic stresses associated with the obstruction of lower crustal channel flow due to rheological heterogeneity. Dynamic stresses depend on the mean velocity (Ū), viscosity (µ) and channel thickness (h), uniquely through the term µŪ/h^2. These stresses are then applied to the base of an elastic upper crust and the deflection of the elastic layer is computed to yield the predicted dynamic topography. We compare model calculations with observed topography of the eastern Tibetan Plateau margin where we interpret channel flow of the deep crust to be inhibited by the rigid Sichuan Basin. Model results suggest that as much 1500 m of dynamic topography across a region of several tens to a hundred kilometres wide may be produced for lower crustal material with a viscosity of 2 × 10^(18) Pa s flowing in a 15 km thick channel around a rigid cylindrical block at an average rate of 80 mm yr^(−1)

BUMPER v1.0: a Bayesian user-friendly model for palaeo-environmental reconstruction

We describe the Bayesian user-friendly model for palaeo-environmental reconstruction (BUMPER), a Bayesian transfer function for inferring past climate and other environmental variables from microfossil assemblages. BUMPER is fully self-calibrating, straightforward to apply, and computationally fast, requiring ~2 s to build a 100-taxon model from a 100-site training set on a standard personal computer. We apply the model’s probabilistic framework to generate thousands of artificial training sets under ideal assumptions.We then use these to demonstrate the sensitivity of reconstructions to the characteristics of the training set, considering assemblage richness, taxon tolerances, and the number of training sites. We find that a useful guideline for the size of a training set is to provide, on average, at least 10 samples of each taxon. We demonstrate general applicability to real data, considering three different organism types (chironomids, diatoms, pollen) and different reconstructed variables. An identically configured model is used in each application, the only change being the input files that provide the training-set environment and taxon-count data. The performance of BUMPER is shown to be comparable with weighted average partial least squares (WAPLS) in each case. Additional artificial datasets are constructed with similar characteristics to the real data, and these are used to explore the reasons for the differing performances of the different training sets

Development and Use of Engineering Standards for Computational Fluid Dynamics for Complex Aerospace Systems

Computational fluid dynamics (CFD) and other advanced modeling and simulation (M&S) methods are increasingly relied on for predictive performance, reliability and safety of engineering systems. Analysts, designers, decision makers, and project managers, who must depend on simulation, need practical techniques and methods for assessing simulation credibility. The AIAA Guide for Verification and Validation of Computational Fluid Dynamics Simulations (AIAA G-077-1998 (2002)), originally published in 1998, was the first engineering standards document available to the engineering community for verification and validation (V&V) of simulations. Much progress has been made in these areas since 1998. The AIAA Committee on Standards for CFD is currently updating this Guide to incorporate in it the important developments that have taken place in V&V concepts, methods, and practices, particularly with regard to the broader context of predictive capability and uncertainty quantification (UQ) methods and approaches. This paper will provide an overview of the changes and extensions currently underway to update the AIAA Guide. Specifically, a framework for predictive capability will be described for incorporating a wide range of error and uncertainty sources identified during the modeling, verification, and validation processes, with the goal of estimating the total prediction uncertainty of the simulation. The Guide's goal is to provide a foundation for understanding and addressing major issues and concepts in predictive CFD. However, this Guide will not recommend specific approaches in these areas as the field is rapidly evolving. It is hoped that the guidelines provided in this paper, and explained in more detail in the Guide, will aid in the research, development, and use of CFD in engineering decision-making

Convergence towards a European strategic culture? A constructivist framework for explaining changing norms.

The article contributes to the debate about the emergence of a European strategic culture to underpin a European Security and Defence Policy. Noting both conceptual and empirical weaknesses in the literature, the article disaggregates the concept of strategic culture and focuses on four types of norms concerning the means and ends for the use of force. The study argues that national strategic cultures are less resistant to change than commonly thought and that they have been subject to three types of learning pressures since 1989: changing threat perceptions, institutional socialization, and mediatized crisis learning. The combined effect of these mechanisms would be a process of convergence with regard to strategic norms prevalent in current EU countries. If the outlined hypotheses can be substantiated by further research the implications for ESDP are positive, especially if the EU acts cautiously in those cases which involve norms that are not yet sufficiently shared across countries

Updated site compilation of the Latin American Pollen Database

Flantua, Suzette G A et al.The updated inventory of the Latin American Pollen Database (LAPD) offers a wide range of new insights. This paper presents a systematic compilation of palynological research in Latin America. A comprehensive inventory of publications in peer-reviewed and grey literature shows a major expansion of studies over the last decades. The inventory includes 1379 cores and sections with paleoecological data and more than 4800 modern samples from throughout the continent. Through the years, pollen datasets extend over increasing spans of time and show improved taxonomic and temporal resolution. Currently, these datasets are from 12 modern biomes and 30 countries, covering an altitudinal range of 0 to 6300. m asl. The most densely sampled regions are the Colombian Andes, the southeast coast of Brazil, and Patagonia. Underrepresented biomes are the warm temperate mixed forest (3%), dry forests (3%), and warm temperate rainforest (1%); whereas steppe, tropical rainforest, and cool grass shrublands, such as the páramos, are generally well represented (all >. 17%). There are 126 records that span the late Pleistocene to the Last Glacial Maximum transition (21,000. cal. yr BP), and >. 20% of the records cover the Younger Dryas interval and the Pleistocene/Holocene transition. Reanalysis of numerous sites using multiproxy tools emphasize the informative value of this approach in paleoenvironmental reconstruction. We make suggestions for several pollen sites and regions to be visited again; similarly we identify some key research questions that have yet to be answered. The updated LAPD now provides the platform to support an exciting new phase of global palynological research in which multi-site data are being integrated to address current cutting-edge research questions. The LAPD compilation of sites and the literature database will be available through the Neotoma Paleoecology Database website and a new LAPD website by the end of 2015We thank the Netherlands Organization for Scientific Research (NWO, grant 2012/13248/ALW) for financial support of this project.Peer reviewe