First investigation of a novel 2D position-sensitive semiconductor detector concept

This paper presents a first study of the performance of a novel 2D position-sensitive microstrip detector, where the resistive charge division method was implemented by replacing the metallic electrodes with resistive electrodes made of polycrystalline silicon. A characterization of two proof-of-concept prototypes with different values of the electrode resistivity was carried out using a pulsed Near Infra-Red laser. The experimental data were compared with the electrical simulation of the sensor equivalent circuit coupled to simple electronics readout circuits. The good agreement between experimental and simulation results establishes the soundness of resistive charge division method in silicon microstrip sensors and validates the developed simulation as a tool for the optimization of future sensor prototypes. Spatial resolution in the strip length direction depends on the ionizing event position. The average value obtained from the protype analysis is close to 1.2% of the strip length for a 6 MIP signal.Comment: 14 pages, 12 figure

Mixed formulation for an easy and robust numerical computation of sorptivity

Sorptivity is one of the most important parameters for the quantification of water infiltration into soils. proposed a specific formulation to derive sorptivity as a function of the soil water retention and hydraulic conductivity functions, as well as initial and final soil water contents. However, this formulation requires the integration of a function involving hydraulic diffusivity, which may be undefined or present numerical difficulties that cause numerical misestimations. In this study, we propose a mixed formulation that scales sorptivity and splits the integrals into two parts: the first term involves the scaled degree of saturation, while the second involves the scaled water pressure head. The new mixed formulation is shown to be robust and well-suited to any type of hydraulic function - even with infinite hydraulic diffusivity or positive air-entry water pressure heads - and any boundary condition, including infinite initial water pressure head, h→-∞. Lastly, we show the benefits of using the proposed formulation for modeling water into soil with analytical models that use sorptivity. Copyright

Designer SiO2 Metasurfaces for Efficient Passive Radiative Cooling

In recent years, an increasing number of passive radiative cooling materials are proposed in the literature, with several examples relying on the use of silica (SiO2) due to its unique stability, non-toxicity, and availability. Nonetheless, due to its bulk phonon-polariton band, SiO2 presents a marked reflection peak within the atmospheric transparency window (8-13 mu m), leading to an emissivity decrease that poses a challenge to fulfilling the criteria for sub-ambient passive radiative cooling. Thus, the latest developments in this field are devoted to the design of engineered SiO2 photonic structures, to increase the cooling potential of bulk SiO2 radiative coolers. This review seeks to identify the most effective photonic design and fabrication strategies for SiO2 radiative emitters by evaluating their cooling efficacy, as well as their scalability, providing an in-depth analysis of the fundamental principles, structural models, and results (both numerical and experimental) of various types of SiO2 radiative coolers

A scaling procedure for straightforward computation of sorptivity

Sorptivity is a parameter of primary importance in the study of unsaturated flow in soils. This hydraulic parameter is required to model water infiltration into vertical soil profiles. Sorptivity can be directly estimated from the soil hydraulic functions (water retention and hydraulic conductivity curves), using the integral formulation of . However, calculating sorptivity in this manner requires the prior determination of the soil hydraulic diffusivity and its numerical integration between initial and final saturation degrees, which may be difficult in some situations (e.g., coarse soil with diffusivity functions that are quasi-infinite close to saturation). In this paper, we present a procedure to compute sorptivity using a scaling parameter, cp, that corresponds to the sorptivity of a unit soil (i.e., unit values for all parameters and zero residual water content) that is utterly dry at the initial state and saturated at the final state. The cp parameter was computed numerically and analytically for five hydraulic models: Delta (i.e., Green and Ampt), Brooks and Corey, van Genuchten-Mualem, van Genuchten-Burdine, and Kosugi. Based on the results, we proposed brand new analytical expressions for some of the models and validated previous formulations for the other models. We also tabulated the output values so that they can easily be used to determine the actual sorptivity value for any case. At the same time, our numerical results showed that the relation between cp and the hydraulic shape parameters strongly depends on the chosen model. These results highlight the need for careful selection of the proper model for the description of the water retention and hydraulic conductivity functions when estimating sorptivity

Nanocrystalline silicon optomechanical cavities

"© 2018 Optical Society of America. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modifications of the content of this paper are prohibited"[EN] Silicon on insulator photonics has offered a versatile platform for the recent development of integrated optomechanical circuits. However, there are some constraints such as the high cost of the wafers and limitation to a single physical device level. In the present work we investigate nanocrystalline silicon as an alternative material for optomechanical devices. In particular we demonstrate that optomechanical crystal cavities fabricated of nanocrystalline silicon have optical and mechanical properties enabling non-linear dynamical behaviour and effects such as thermo-optic/free-carrier-dispersion self-pulsing, phonon lasing and chaos, all at low input laser power and with typical frequencies as high as 0.3 GHz. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing AgreementEuropean Commission project PHENOMEN (H2020-EU-713450), MINECO Severo Ochoa Excellence program (SEV-2013-0295), MINECO (FIS2015-70862-P, RYC-2014-15392) and CERCA Programme/Generalitat de Catalunya.Navarro-Urrios, D.; Capuj, N.; Maire, J.; Colombano, M.; Jaramillo-Fernandez, J.; Chavez-Angel, E.; Martín-Rodríguez, LL.... (2018). Nanocrystalline silicon optomechanical cavities. Optics Express. 26(8):9829-9839. https://doi.org/10.1364/OE.26.009829S98299839268Kippenberg, T. J., & Vahala, K. J. (2008). Cavity Optomechanics: Back-Action at the Mesoscale. Science, 321(5893), 1172-1176. doi:10.1126/science.1156032Aspelmeyer, M., Kippenberg, T. J., & Marquardt, F. (2014). Cavity optomechanics. Reviews of Modern Physics, 86(4), 1391-1452. doi:10.1103/revmodphys.86.1391Navarro-Urrios, D., Capuj, N. E., Gomis-Bresco, J., Alzina, F., Pitanti, A., Griol, A., … Sotomayor Torres, C. M. (2015). A self-stabilized coherent phonon source driven by optical forces. Scientific Reports, 5(1). doi:10.1038/srep15733Navarro-Urrios, D., Capuj, N. E., Colombano, M. F., García, P. D., Sledzinska, M., Alzina, F., … Sotomayor-Torres, C. M. (2017). Nonlinear dynamics and chaos in an optomechanical beam. Nature Communications, 8(1). doi:10.1038/ncomms14965Leijssen, R., La Gala, G. R., Freisem, L., Muhonen, J. T., & Verhagen, E. (2017). Nonlinear cavity optomechanics with nanomechanical thermal fluctuations. Nature Communications, 8(1). doi:10.1038/ncomms16024Gil-Santos, E., Labousse, M., Baker, C., Goetschy, A., Hease, W., Gomez, C., … Favero, I. (2017). Light-Mediated Cascaded Locking of Multiple Nano-Optomechanical Oscillators. Physical Review Letters, 118(6). doi:10.1103/physrevlett.118.063605Shah, S. Y., Zhang, M., Rand, R., & Lipson, M. (2015). Master-Slave Locking of Optomechanical Oscillators over a Long Distance. Physical Review Letters, 114(11). doi:10.1103/physrevlett.114.113602Weis, S., Rivière, R., Deléglise, S., Gavartin, E., Arcizet, O., Schliesser, A., & Kippenberg, T. J. (2010). Optomechanically Induced Transparency. Science, 330(6010), 1520-1523. doi:10.1126/science.1195596Verhagen, E., Deléglise, S., Weis, S., Schliesser, A., & Kippenberg, T. J. (2012). Quantum-coherent coupling of a mechanical oscillator to an optical cavity mode. Nature, 482(7383), 63-67. doi:10.1038/nature10787Tomes, M., & Carmon, T. (2009). Photonic Micro-Electromechanical Systems Vibrating atX-band (11-GHz) Rates. Physical Review Letters, 102(11). doi:10.1103/physrevlett.102.113601Thompson, J. D., Zwickl, B. M., Jayich, A. M., Marquardt, F., Girvin, S. M., & Harris, J. G. E. (2008). Strong dispersive coupling of a high-finesse cavity to a micromechanical membrane. Nature, 452(7183), 72-75. doi:10.1038/nature06715Eichenfield, M., Chan, J., Camacho, R. M., Vahala, K. J., & Painter, O. (2009). Optomechanical crystals. Nature, 462(7269), 78-82. doi:10.1038/nature08524Chan, J., Alegre, T. P. M., Safavi-Naeini, A. H., Hill, J. T., Krause, A., Gröblacher, S., … Painter, O. (2011). Laser cooling of a nanomechanical oscillator into its quantum ground state. Nature, 478(7367), 89-92. doi:10.1038/nature10461Safavi-Naeini, A. H., Alegre, T. P. M., Chan, J., Eichenfield, M., Winger, M., Lin, Q., … Painter, O. (2011). Electromagnetically induced transparency and slow light with optomechanics. Nature, 472(7341), 69-73. doi:10.1038/nature09933Pennec, Y., Laude, V., Papanikolaou, N., Djafari-Rouhani, B., Oudich, M., El Jallal, S., … Martínez, A. (2014). Modeling light-sound interaction in nanoscale cavities and waveguides. Nanophotonics, 3(6), 413-440. doi:10.1515/nanoph-2014-0004Davanço, M., Ates, S., Liu, Y., & Srinivasan, K. (2014). Si3N4 optomechanical crystals in the resolved-sideband regime. Applied Physics Letters, 104(4), 041101. doi:10.1063/1.4858975Balram, K. C., Davanço, M. I., Song, J. D., & Srinivasan, K. (2016). Coherent coupling between radiofrequency, optical and acoustic waves in piezo-optomechanical circuits. Nature Photonics, 10(5), 346-352. doi:10.1038/nphoton.2016.46Bochmann, J., Vainsencher, A., Awschalom, D. D., & Cleland, A. N. (2013). Nanomechanical coupling between microwave and optical photons. Nature Physics, 9(11), 712-716. doi:10.1038/nphys2748Xiong, C., Pernice, W. H. P., Sun, X., Schuck, C., Fong, K. Y., & Tang, H. X. (2012). Aluminum nitride as a new material for chip-scale optomechanics and nonlinear optics. New Journal of Physics, 14(9), 095014. doi:10.1088/1367-2630/14/9/095014Gomis-Bresco, J., Navarro-Urrios, D., Oudich, M., El-Jallal, S., Griol, A., Puerto, D., … Torres, C. M. S. (2014). A one-dimensional optomechanical crystal with a complete phononic band gap. Nature Communications, 5(1). doi:10.1038/ncomms5452Heck, M. J. R., Bauters, J. F., Davenport, M. L., Spencer, D. T., & Bowers, J. E. (2014). Ultra-low loss waveguide platform and its integration with silicon photonics. Laser & Photonics Reviews, 8(5), 667-686. doi:10.1002/lpor.201300183Solehmainen, K., Aalto, T., Dekker, J., Kapulainen, M., Harjanne, M., Kukli, K., … Leskela, M. (2005). Dry-etched silicon-on-insulator waveguides with low propagation and fiber-coupling losses. Journal of Lightwave Technology, 23(11), 3875-3880. doi:10.1109/jlt.2005.857750Sekoguchi, H., Takahashi, Y., Asano, T., & Noda, S. (2014). Photonic crystal nanocavity with a Q-factor of ~9 million. Optics Express, 22(1), 916. doi:10.1364/oe.22.000916Almeida, V. R., Barrios, C. A., Panepucci, R. R., & Lipson, M. (2004). All-optical control of light on a silicon chip. Nature, 431(7012), 1081-1084. doi:10.1038/nature02921Narayanan, K., & Preble, S. F. (2010). Optical nonlinearities in hydrogenated-amorphous silicon waveguides. Optics Express, 18(9), 8998. doi:10.1364/oe.18.008998Preston, K., Dong, P., Schmidt, B., & Lipson, M. (2008). High-speed all-optical modulation using polycrystalline silicon microring resonators. Applied Physics Letters, 92(15), 151104. doi:10.1063/1.2908869Wang, K.-Y., & Foster, A. C. (2012). Ultralow power continuous-wave frequency conversion in hydrogenated amorphous silicon waveguides. Optics Letters, 37(8), 1331. doi:10.1364/ol.37.001331Matres, J., Ballesteros, G. C., Gautier, P., Fédéli, J.-M., Martí, J., & Oton, C. J. (2013). High nonlinear figure-of-merit amorphous silicon waveguides. Optics Express, 21(4), 3932. doi:10.1364/oe.21.003932Waldow, M., Plötzing, T., Gottheil, M., Först, M., Bolten, J., Wahlbrink, T., & Kurz, H. (2008). 25ps all-optical switching in oxygen implanted silicon-on-insulator microring resonator. Optics Express, 16(11), 7693. doi:10.1364/oe.16.007693Wang, K.-Y., Petrillo, K. G., Foster, M. A., & Foster, A. C. (2012). Ultralow-power all-optical processing of high-speed data signals in deposited silicon waveguides. Optics Express, 20(22), 24600. doi:10.1364/oe.20.024600Ylönen, M., Torkkeli, A., & Kattelus, H. (2003). In situ boron-doped LPCVD polysilicon with low tensile stress for MEMS applications. Sensors and Actuators A: Physical, 109(1-2), 79-87. doi:10.1016/j.sna.2003.09.017Theodorakos, I., Zergioti, I., Vamvakas, V., Tsoukalas, D., & Raptis, Y. S. (2014). Picosecond and nanosecond laser annealing and simulation of amorphous silicon thin films for solar cell applications. Journal of Applied Physics, 115(4), 043108. doi:10.1063/1.4863402Navarro-Urrios, D., Gomis-Bresco, J., El-Jallal, S., Oudich, M., Pitanti, A., Capuj, N., … Sotomayor Torres, C. M. (2014). Dynamical back-action at 5.5 GHz in a corrugated optomechanical beam. AIP Advances, 4(12), 124601. doi:10.1063/1.4902171Barclay, P. E., Srinivasan, K., & Painter, O. (2005). Nonlinear response of silicon photonic crystal micresonators excited via an integrated waveguide and fiber taper. Optics Express, 13(3), 801. doi:10.1364/opex.13.000801Cuffe, J., Ristow, O., Chávez, E., Shchepetov, A., Chapuis, P.-O., Alzina, F., … Sotomayor Torres, C. M. (2013). Lifetimes of Confined Acoustic Phonons in Ultrathin Silicon Membranes. Physical Review Letters, 110(9). doi:10.1103/physrevlett.110.095503Volklein, F., & Balles, H. (1992). A Microstructure For Measurement Of Thermal Conductivity Of Polysilicon Thin Films. Journal of Microelectromechanical Systems, 1(4), 193-196. doi:10.1109/jmems.1992.752511Pennec, Y., Rouhani, B. D., El Boudouti, E. H., Li, C., El Hassouani, Y., Vasseur, J. O., … Martinez, A. (2010). Simultaneous existence of phononic and photonic band gaps in periodic crystal slabs. Optics Express, 18(13), 14301. doi:10.1364/oe.18.014301Escalante, J. M., Martínez, A., & Laude, V. (2014). Design of single-mode waveguides for enhanced light-sound interaction in honeycomb-lattice silicon slabs. Journal of Applied Physics, 115(6), 064302. doi:10.1063/1.486466

Thermal Tolerance of the Coffee Berry Borer Hypothenemus hampei: Predictions of Climate Change Impact on a Tropical Insect Pest

Coffee is predicted to be severely affected by climate change. We determined the thermal tolerance of the coffee berry borer , Hypothenemus hampei, the most devastating pest of coffee worldwide, and make inferences on the possible effects of climate change using climatic data from Colombia, Kenya, Tanzania, and Ethiopia. For this, the effect of eight temperature regimes (15, 20, 23, 25, 27, 30, 33 and 35°C) on the bionomics of H. hampei was studied. Successful egg to adult development occurred between 20–30°C. Using linear regression and a modified Logan model, the lower and upper thresholds for development were estimated at 14.9 and 32°C, respectively. In Kenya and Colombia, the number of pest generations per year was considerably and positively correlated with the warming tolerance. Analysing 32 years of climatic data from Jimma (Ethiopia) revealed that before 1984 it was too cold for H. hampei to complete even one generation per year, but thereafter, because of rising temperatures in the area, 1–2 generations per year/coffee season could be completed. Calculated data on warming tolerance and thermal safety margins of H. hampei for the three East African locations showed considerably high variability compared to the Colombian site. The model indicates that for every 1°C rise in thermal optimum (Topt.), the maximum intrinsic rate of increase (rmax) will increase by an average of 8.5%. The effects of climate change on the further range of H. hampei distribution and possible adaption strategies are discussed. Abstracts in Spanish and French are provided as supplementary material Abstract S1 and Abstract S2

Infrastructure for Detector Research and Development towards the International Linear Collider

The EUDET-project was launched to create an infrastructure for developing and testing new and advanced detector technologies to be used at a future linear collider. The aim was to make possible experimentation and analysis of data for institutes, which otherwise could not be realized due to lack of resources. The infrastructure comprised an analysis and software network, and instrumentation infrastructures for tracking detectors as well as for calorimetry.Comment: 54 pages, 48 picture

Intracellular directed evolution of proteins from combinatorial libraries based on conditional phage replication

Directed evolution is a powerful tool to improve the characteristics of biomolecules. Here we present a protocol for the intracellular evolution of proteins with distinct differences and advantages in comparison with established techniques. These include the ability to select for a particular function from a library of protein variants inside cells, minimizing undesired coevolution and propagation of nonfunctional library members, as well as allowing positive and negative selection logics using basally active promoters. A typical evolution experiment comprises the following stages: (i) preparation of a combinatorial M13 phagemid (PM) library expressing variants of the gene of interest (GOI) and preparation of the Escherichia coli host cells; (ii) multiple rounds of an intracellular selection process toward a desired activity; and (iii) the characterization of the evolved target proteins. The system has been developed for the selection of new orthogonal transcription factors (TFs) but is capable of evolving any gene—or gene circuit function—that can be linked to conditional M13 phage replication. Here we demonstrate our approach using as an example the directed evolution of the bacteriophage λ cI TF against two synthetic bidirectional promoters. The evolved TF variants enable simultaneous activation and repression against their engineered promoters and do not cross-react with the wild-type promoter, thus ensuring orthogonality. This protocol requires no special equipment, allowing synthetic biologists and general users to evolve improved biomolecules within ~7 weeks

Family Firms and Firm Performance: Evidence from Japan

Corrigendum: Nature Structural and Molecular Biology 16 (12), 1331 (2009) doi:10.1038/nsmb1209-1331bInternational audienceThioredoxins (Trxs) are oxidoreductase enzymes, present in all organisms, that catalyze the reduction of disulfide bonds in proteins. By applying a calibrated force to a substrate disulfide, the chemical mechanisms of Trx catalysis can be examined in detail at the single-molecule level. Here we use single-molecule force-clamp spectroscopy to explore the chemical evolution of Trx catalysis by probing the chemistry of eight different Trx enzymes. All Trxs show a characteristic Michaelis-Menten mechanism that is detected when the disulfide bond is stretched at low forces, but at high forces, two different chemical behaviors distinguish bacterial-origin from eukaryotic-origin Trxs. Eukaryotic-origin Trxs reduce disulfide bonds through a single-electron transfer reaction (SET), whereas bacterial-origin Trxs show both nucleophilic substitution (SN2) and SET reactions. A computational analysis of Trx structures identifies the evolution of the binding groove as an important factor controlling the chemistry of Trx catalysis

Regulation of Intestinal Immune Response by Selective Removal of the Anterior, Posterior, or Entire Pituitary Gland in Trichinella spiralis Infected Golden Hamsters

The influence of anterior pituitary hormones on the gastrointestinal tract of humans and animals has been previously reported. Hypophysectomy (HYPOX) in the rat causes atrophy of the intestinal mucosa, and reduction of gastric secretion and intestinal absorption, as well as increased susceptibility to bacterial and viral infections. However, to our knowledge, no findings have been published concerning the immune response following HYPOX during worm infection, particularly that which is caused by the nematode Trichinella spiralis. The aim of this work was to analyze the effects of total or partial HYPOX on colonization of T. spiralis in the intestinal lumen, together with duodenal and splenic cytokine expression. Our results indicate that 5 days post infection, only neurointermediate pituitary lobectomy (NIL) reduces the number of intestinally recovered T. spiralis larvae. Using semiquantitative inmunofluorescent laser confocal microscopy, we observed that the mean intensity of all tested Th1 cytokines was markedly diminished, even in the duodenum of infected controls. In contrast, a high level of expression of these cytokines was noted in the NIL infected hamsters. Likewise, a significant decrease in the fluorescence intensity of Th2 cytokines (with the exception of IL-4) was apparent in the duodenum of control and sham infected hamsters, compared to animals with NIL surgeries, which showed an increase in the expression of IL-5 and IL-13. Histology of duodenal mucosa from NIL hamsters showed an exacerbated inflammatory infiltrate located along the lamina propria, which was related to the presence of the parasite. We conclude that hormones from each pituitary lobe affect the gastrointestinal immune responses to T. spiralis through various mechanisms