Micromanipulation of InP lasers with optoelectronic tweezers for integration on a photonic platform

The integration of light sources on a photonic platform is a key aspect of the fabrication of self-contained photonic circuits with a small footprint that does not have a definitive solution yet. Several approaches are being actively researched for this purpose. In this work we propose optoelectronic tweezers for the manipulation and integration of light sources on a photonic platform and report the positional and angular accuracy of the micromanipulation of standard Fabry-Pérot InP semiconductor laser die. These lasers are over three orders of magnitude bigger in volume than any previously assembled with optofluidic techniques and the fact that they are industry standard lasers makes them significantly more useful than previously assembled microdisk lasers. We measure the accuracy to be 2.5 ± 1.4 µm and 1.4 ± 0.4° and conclude that optoelectronic tweezers are a promising technique for the micromanipulation and integration of optoelectronic components in general and semiconductor lasers in particular

An iterative method for reference pattern selection in high-resolution electron backscatter diffraction (HR-EBSD)

For high (angular) resolution electron backscatter diffraction (HR-EBSD), the selection of a reference diffraction pattern (EBSP0) significantly affects the precision of the calculated strain and rotation maps. This effect was demonstrated in plastically deformed body-centred cubic and face-centred cubic ductile metals (ferrite and austenite grains in duplex stainless steel) and brittle single-crystal silicon, which showed that the effect is not only limited to measurement magnitude but also spatial distribution. An empirical relationship was then identified between the cross-correlation parameter and angular error, which was used in an iterative algorithm to identify the optimal reference pattern that maximises the precision of HR-EBSD

Granular Materials and the Risks They Pose for Success on the Moon and Mars

Working with soil, sand, powders, ores, cement and sintered bricks, excavating, grading construction sites, driving off-road, transporting granules in chutes and pipes, sifting gravel, separating solids from gases, and using hoppers are so routine that it seems straightforward to do it on the Moon and Mars as we do it on Earth. This paper brings to the fore how little these processes are understood and the millennia-long trial-and-error practices that lead to today's massive over-design, high failure rate, and extensive incremental scaling up of industrial processes because of the inadequate predictive tools for design. We present a number of pragmatic scenarios where granular materials play a role, the risks involved, and what understanding is needed to greatly reduce the risks

HR-EBSD analysis of in situ stable crack growth at the micron scale

Understanding the local fracture resistance of microstructural features. such as brittle inclusions, coatings, and interfaces at the microscale under complex loading conditions is critical for microstructure-informed design of materials. In this study, a novel approach has been formulated to decompose the J-integral evaluation of the elastic energy release rate to the three-dimensional stress intensity factors directly from experimental measurements of the elastic deformation gradient tensors of the crack field by in situ high (angular) resolution electron backscatter diffraction (HR-EBSD). An exemplar study is presented of a quasi-static crack, inclined to the observed surface, propagating on low index {hkl} planes in a (001) single crystal silicon wafer

How can new technologies help us with earthquake reconnaissance?

Earthquake reconnaissance missions have been very successful in identifying the specific causes of failure for individual buildings and the deficiencies in building codes or local construction practices that have led to these; however, their ability to capture robust statistics on patterns of failure is usually beyond their scope. Furthermore, the success of these endeavours in establishing poor construction designs and practices, means that if we are to continue to learn new lessons we will need to gain fresh insights using new data streams. Recent technological advances have the ability to enable us to both increase the amount of data collected and to improve on the precision of these measurements. Furthermore, social media has the potential to provide entirely new data streams and to significantly add value to collected data by harnessing an army of data manipulators and interpreters. Howto do this in a reliable way however, is the subject of much debate. In this paper, we explore the potential for a number of trialled and potential technologies to collect better and new information in earthquake reconnaissance, including virtual damage surveying - where results from damage surveys completed in the field, are compared to omnidirectional images collected during the mission and interpreted by a virtual surveyor based in the UK, data collected through aerial images taken by UAVs and 3D models created from a series of drone or other images. Finally, we describe the potential of social media such as Twitter to collect data streams on damage and other impacts. Examples of impact data such as road closures, landslips and infrastructure service failures collected for flooding and landslide will be presented to show the potential of this technology for earthquakes

EVALUATING CLINICAL MASTITIS IN DAIRY CATTLE FED MONENSIN

The effect of Monensin on clinical mastitis in dairy cattle was evaluated from data collected at nine geographical clinical field trials using 966 Holstein cows and heifers in the United States and Canada. At each site, a randomized complete block design was conducted. Monensin (Rumensin®) was fed at concentrations of 0, 8, 16, or 24 ppm in a total mixed ration beginning 21 days before first calving for all nine sites, up to 7 days after second calving for six sites, and 203 days after second calving for three sites. Quarter milk samples were taken and cultured to determine the causative pathogen for each mastitis case and if clinical signs were observed the disease data were grouped according to etiology and analyses conducted. Analyses were conducted for all clinical mastitis cases as well as for a breakdown of the clinical mastitis cases into microorganism group levels. A generalized linear mixed model and a linear mixed model were used to determine if there were significant differences in clinical mastitis between the non-zero concentrations of Monensin and controls. Response variables for the clinical mastitis cases that were analyzed using a generalized linear mixed model were Animal rate, Quarter rate, Observation rate, and Incident rate. An additional response variable, Average case duration, was analyzed using a linear mixed model. Inferences from the analyses indicate that Monensin does not influence the susceptibility of dairy cattle to clinical mastitis

THE EFFECT OF MONENSIN ON LACTATION DAIRY COWS: A DOSE RESPONSE EVALUATION

Monensin (Rumensin®) was fed at doses of 0, 8, 16, or 24 ppm to 966 dairy cows in nine different geographical locations in the USA and Canada. A dose response analysis was conducted on the primary variable, milk production efficiency, to determine the most appropriate dose response function, establish a minimum effective dose, and, when possible, determine a maximum effective dose. Linear mixed models (SAS® Proc Mixed v6.12) were fit to the data. Linear contrasts comparing the non-zero doses of monensin to the control were done to initially determine a minimum effective dose from the 3 non-zero design points. In addition, eight predefined linear contrasts were used to initially determine the general linear-plateau shape of a dose response function for each primary variable. A weighted regression analysis of the least squares means and corresponding standard errors was used when it was necessary to discriminate between the competing linear-plateau functions. A non-overlapping confidence interval process was followed, if it was deemed appropriate, to establish a minimum effective dose for a nondesign point. In cases where the dose response function had a plateau, the dose where the plateau began was classified as the “maximum effective dose” (minimum dose for maximum effect). In cases where the dose response function did not have a plateau, the maximum effective dose was the largest dose used in the study if the response rate was significant

Kinetics of Mycobacterium tuberculosis-specific IFN-γ responses and sputum bacillary clearance in HIV-infected adults during treatment of pulmonary tuberculosis

This work was supported by funding from the Wellcome Trust (UK) through Fellowships 092773/Z/10/Z (to D.T.M), 086757/Z/08/Z (to D.J.S) and 088696/Z/09/Z (to H.C.M). Core funding from the Wellcome Trust supports the laboratory and office facilities at the Malawi-Liverpool-Wellcome Trust Clinical Research Programme.In HIV-uninfected adults with pulmonary tuberculosis (TB), anti-TB treatment is associated with changes in Mycobacterium tuberculosis (Mtb)-specific immune responses, which correlate with sputum bacillary load. It is unclear if this occurs in HIV-infected TB patients. We investigated changes in Mtb-specific immune responses and sputum bacillary clearance during anti-TB treatment in HIV-infected and HIV-uninfected adults with pulmonary TB. Sputum bacillary load was assessed by smear microscopy and culture. Mtb-specific IFN-γ secreting peripheral blood mononuclear cells were enumerated using an ELISPOT assay following stimulation with PPD, ESAT-6 and CFP-10. The baseline frequency of Mtb-specific IFN-γ secreting cells was lower in HIV-infected than HIV-uninfected patients (median PPD 32 vs. 104 Spot Forming Units (SFU), p = 0.05; CFP-10 19 vs. 74 SFU, p = 0.01). ESAT-6-specific IFN-γ secreting cells and sputum bacillary load declined progressively during treatment in both HIV-infected and HIV-uninfected patients. HIV infection did not influence the 2-month sputum culture conversion rate (Odds Ratio 0.89, p = 0.95). These findings suggest that changes in ESAT-6-specific immune responses during anti-TB treatment correspond with changes in sputum bacillary load irrespective of host HIV infection status. The utility of Mtb-specific IFN-γ responses as a proxy measure of treatment response in HIV-infected TB patients warrants further evaluation in other settings.Publisher PDFPeer reviewe

A Low Cost Technique for Adding Microlasers to a Silicon Photonic Platform

In this paper we report the physical micromanipulation of standard InP telecommunications laser die in a liquid medium by means of optoelectronic tweezers. Optoelectronic tweezers have been shown to use much less optical power than optical tweezers, they do not require a coherent light source to function and the creation of multiple traps is straightforward. These properties make the technique a very good candidate for the massive parallel micromanipulation of optoelectronic components for assembly on a photonic platform. We discuss the positional and orientation accuracy of the optoelectronic tweezers in relation to the alignment requirements for low-loss coupling between the light sources and the other components in a photonic platform. Our experiments indicate that the accuracy is better than 2 µm and 2◦ for translations and rotations, respectively