629 research outputs found
Recommended from our members
Induction Furnace Testing of the Durability of Prototype Crucibles in a Molten Metal Environment
Engineered ceramic crucibles are commonly used to contain molten metal. Besides high temperature stability, other desired crucible characteristics include thermal shock resistance, minimal reaction with the molten metal and resistance to attack from the base metal oxide formed during melting. When used in an induction furnace, they can be employed as a “semi-permanent” crucible incorporating a dry ram backup and a ceramic cap. This report covers several 250-lb single melt crucible tests in an air melt induction furnace. These tests consisted of melting a charge of 17-4PH stainless steel, holding the charge molten for two hours before pouring off the heat and then subsequently sectioning the crucible to review the extent of erosion, penetration and other physical characteristics. Selected temperature readings were made throughout each melt. Chemistry samples were also taken from each heat periodically throughout the hold. The manganese level was observed to affect the rate of chromium loss in a non-linear fashion
Recommended from our members
Liquid Metal Processing and Casting Experiences at the U.S. Department of Energy's Albany Research Center
In this paper we will discuss some of the early pioneering work as well as some of our more recent research. The Albany Research Center (ARC) has been involved with the melting and processing of metals since it was established in 1942. In the early days, hardly anything was known about melting refractory or reactive metals and as such, virtually everything had to be developed in-house. Besides the more common induction heated air-melt furnaces, ARC has built and/or utilized a wide variety of furnaces including vacuum arc remelt ingot and casting furnaces, cold wall induction furnaces, electric arc furnaces, cupola furnaces and reverberatory furnaces. The melt size of these furnaces range from several grams to a ton or more. We have used these furnaces to formulate custom alloys for wrought applications as well as for such casting techniques as spin casting, investment casting and lost foam casting among many. Two early spin-off industrializations were Wah Chang (wrought zirconium alloys for military and commercial nuclear applications) and Oremet (both wrought and cast Ti). Both of these companies are now part of the ATI Allegheny Ludlum Corporation
Recommended from our members
Development of low coefficient of thermal expansion (CTE) nickel alloys for potential use as interconnects in SOFC
This paper deals with the development of low coefficient of thermal expansion (CTE) nickel-base superalloys for potential use as interconnects for SOFC. Ni-Mo-Cr alloys were formulated with CTE on the order of 12.5 to 13.5 x10-6/°C. The alloys were vacuum induction melted and reduced to sheet via a combination of hot and cold working. Dilatometry was used to measure CTE of the alloys. Oxidation behavior of the alloys at 800°C in dry and moist air is reported. The results are compared to results for Haynes 230 (a commercial Ni-base superalloy) and for Crofer 22APU (a commercial ferritic stainless steel designed specifically for use as an SOFC interconnect)
The influence of incorporation of Mn on the pitting corrosion performance of CrFeCoNi High Entropy Alloy at different temperatures
The electrochemical behavior and susceptibility to pitting corrosion of CrFeCoNi and CrMnFeCoNi high entropy alloys were studied in a 0.1 M NaCl solution at temperatures ranging from 25 to 75 °C. Electrochemical measurements revealed that CrMnFeCoNi is more susceptible to oxide film breakdown and localized corrosion compared to CrFeCoNi. Post corrosion microscopic observations showed severe pitting corrosion for CrMnFeCoNi in higher temperatures compared to CrFeCoNi. Based on in-depth XPS profile measurements on the remaining oxide films, this behavior was attributed to the depletion of Cr in the oxide film and detrimental presence of Mn in the matrix solid solution of CrMnFeCoNi
Recommended from our members
Oxidation resistance of 9-12% Cr steels: effect of rare earth surface treatment
Medium Cr steels have been used in fossil fired power plants for many years because of their excellent high temperature stability and mechanical properties. The environment in a fossil fired power plant is extremely aggressive in terms of corrosion, especially oxidation. This is only accelerated as the operating temperature increases to 650C and beyond. For any new steel to be qualified for power plant use, in addition to adequate strength at the operating temperature, material wastage from all corrosion processes must be kept to a minimum acceptable level. The use of medium Cr steels provides a means to improve overall corrosion resistance. Three medium Cr are under development for use as high temperature power plant steels: 0.08C-(9-12)Cr-1.2Ni-0.7Mo-3.0Cu-3.0Co-0.5Ti. Oxidation tests were performed on the steels for times greater than 1000 hours in order to determine the oxidation kinetics and extent of material wastage. Also, rare earth oxides were incorporated into the outer surface layers of the steels to see if the oxidation resistance could be improved. These results will be compared to current power plant steels
Effect of Molybdenum on the Corrosion Behavior of High-Entropy Alloys CoCrFeNi 2
The corrosion behavior of high-entropy alloys (HEAs) CoCrFeNi2 and CoCrFeNi2Mo0.25 was investigated in 3.5 wt. percent sodium chloride (NaCl) at 25°C by electrochemical methods. Their corrosion parameters were compared to those of HASTELLOY® C-276 (UNS N10276) and stainless steel 316L (UNS 31600) to assess the suitability of HEAs for potential industrial applications in NaCl simulating seawater type environments. The corrosion rates were calculated using corrosion current determined from electrochemical experiments for each of the alloys. In addition, potentiodynamic polarization measurements can indicate active, passive, and transpassive behavior of the metal as well as potential susceptibility to pitting corrosion. Cyclic voltammetry (CV) can confirm the alloy susceptibility to pitting corrosion. Electrochemical impedance spectroscopy (EIS) elucidates the corrosion mechanism under studied conditions. The results of the electrochemical experiments and scanning electron microscopy (SEM) analyses of the corroded surfaces revealed general corrosion on alloy CoCrFeNi2Mo0.25 and HASTELLOY C-276 and pitting corrosion on alloy CoCrFeNi2 and stainless steel 316L
Genetic risk of progression to type 2 diabetes and response to intensive lifestyle or metformin in prediabetic women with and without a history of gestational diabetes mellitus.
OBJECTIVE The Diabetes Prevention Program (DPP) trial investigated rates of progression to diabetes among adults with prediabetes randomized to treatment with placebo, metformin, or intensive lifestyle intervention. Among women in the DPP, diabetes risk reduction with metformin was greater in women with prior gestational diabetes mellitus (GDM) compared with women without GDM but with one or more previous live births.
RESEARCH DESIGN AND METHODS We asked if genetic variability could account for these differences by comparing β-cell function and genetic risk scores (GRS), calculated from 34 diabetes-associated loci, between women with and without histories of GDM.
RESULTS β-Cell function was reduced in women with GDM. The GRS was positively associated with a history of GDM; however, the GRS did not predict progression to diabetes or modulate response to intervention.
CONCLUSIONS These data suggest that a diabetes-associated GRS is associated with development of GDM and may characterize women at risk for development of diabetes due to β-cell dysfunction
First-principles lattice dynamics, thermodynamics, and elasticity of Cr 2 O 3
We present the calculation of the lattice dynamics of chromia (Cr 2 O 3 ), a typical Mott-Hubbard insulator, employing the first-principles density functional theory plus U approach. We first report the phonon dispersions at the theoretical equilibrium volume. Then the phonon density-of-states is calculated as a function of volume. Finally, the atomic volume, heat capacity, linear thermal expansion coefficient, bulk modulus, Grüneisen constant, and elastic constants are calculated as functions of temperature
A Comparison of the Effects of Random and Selective Mass Extinctions on Erosion of Evolutionary History in Communities of Digital Organisms
The effect of mass extinctions on phylogenetic diversity and branching history of clades remains poorly understood in paleobiology. We examined the phylogenies of communities of digital organisms undergoing open-ended evolution as we subjected them to instantaneous “pulse” extinctions, choosing survivors at random, and to prolonged “press” extinctions involving a period of low resource availability. We measured age of the phylogenetic root and tree stemminess, and evaluated how branching history of the phylogenetic trees was affected by the extinction treatments. We found that strong random (pulse) and strong selective extinction (press) both left clear long-term signatures in root age distribution and tree stemminess, and eroded deep branching history to a greater degree than did weak extinction and control treatments. The widely-used Pybus-Harvey gamma statistic showed a clear short-term response to extinction and recovery, but differences between treatments diminished over time and did not show a long-term signature. The characteristics of post-extinction phylogenies were often affected as much by the recovery interval as by the extinction episode itself
- …