1,752 research outputs found
Comparison of spatially and temporally resolved diffuse-reflectance measurement systems for determination of biomedical optical properties
Time-resolved and spatially resolved measurements of the diffuse reflectance from biological tissue are two well-established techniques for extracting the reduced scattering and absorption coefficients. We have performed a comparison study of the performance of a spatially resolved and a time-resolved instrument at wavelengths 660 and 785 nm and also of an integrating-sphere setup at 550-800 nm. The first system records the diffuse reflectance from a diode laser by means of a fiber bundle probe in contact with the sample. The time-resolved system utilizes picosecond laser pulses and a single-photon-counting detection scheme. We extracted the optical properties by calibration using known standards for the spatially resolved system, by fitting to the diffusion equation for the time-resolved system, and by using an inverse Monte Carlo model for the integrating sphere. The measurements were performed on a set of solid epoxy tissue phantoms. The results showed less than 10% difference in the evaluation of the reduced scattering coefficient among the systems for the phantoms in the range 9-20 cm(-1), and absolute differences of less than 0.05 cm(-1) for the absorption coefficient in the interval 0.05-0.30 cm(-1). (C) 2003 Optical Society of America
Real-time absorption and scattering characterization of slab-shaped turbid samples obtained by a combination of angular and spatially resolved measurements
We present a fast and accurate method for real-time determination of the absorption coefficient, the scattering coefficient, and the anisotropy factor of thin turbid samples by using simple continuous-wave noncoherent light sources. The three optical properties are extracted from recordings of angularly resolved transmittance in addition to spatially resolved diffuse reflectance and transmittance. The applied multivariate calibration and prediction techniques are based on multiple polynomial regression in combination with a Newton-Raphson algorithm. The numerical test results based on Monte Carlo simulations showed mean prediction errors of approximately 0.5% for all three optical properties within ranges typical for biological media. Preliminary experimental results are also presented yielding errors of approximately 5%. Thus the presented methods show a substantial potential for simultaneous absorption and scattering characterization of turbid media
Metabolic analysis of the interaction between plants and herbivores
Insect herbivores by necessity have to deal with a large arsenal of plant defence metabolites. The levels of defence compounds may be increased by insect damage. These induced plant responses may also affect the metabolism and performance of successive insect herbivores. As the chemical nature of induced responses is largely unknown, global metabolomic analyses are a valuable tool to gain more insight into the metabolites possibly involved in such interactions. This study analyzed the interaction between feral cabbage (Brassica oleracea) and small cabbage white caterpillars (Pieris rapae) and how previous attacks to the plant affect the caterpillar metabolism. Because plants may be induced by shoot and root herbivory, we compared shoot and root induction by treating the plants on either plant part with jasmonic acid. Extracts of the plants and the caterpillars were chemically analysed using Ultra Performance Liquid Chromatography/Time of Flight Mass Spectrometry (UPLCT/MS). The study revealed that the levels of three structurally related coumaroylquinic acids were elevated in plants treated on the shoot. The levels of these compounds in plants and caterpillars were highly correlated: these compounds were defined as the ‘metabolic interface’. The role of these metabolites could only be discovered using simultaneous analysis of the plant and caterpillar metabolomes. We conclude that a metabolomics approach is useful in discovering unexpected bioactive compounds involved in ecological interactions between plants and their herbivores and higher trophic levels.
Room temperature mid-IR single photon spectral imaging
Spectral imaging and detection of mid-infrared (mid-IR) wavelengths are
emerging as an enabling technology of great technical and scientific interest;
primarily because important chemical compounds display unique and strong mid-IR
spectral fingerprints revealing valuable chemical information. While modern
Quantum cascade lasers have evolved as ideal coherent mid-IR excitation
sources, simple, low noise, room temperature detectors and imaging systems
still lag behind. We address this need presenting a novel, field-deployable,
upconversion system for sensitive, 2-D, mid-IR spectral imaging. Measured room
temperature dark noise is 0.2 photons/spatial element/second, which is a
billion times below the dark noise level of cryogenically cooled InSb cameras.
Single photon imaging and up to 200 x 100 spatial elements resolution is
obtained reaching record high continuous wave quantum efficiency of about 20 %
for polarized incoherent light at 3 \mum. The proposed method is relevant for
existing and new mid-IR applications like gas analysis and medical diagnostics
Bridging the Mid-Infrared-to-Telecom Gap with Silicon Nanophotonic Spectral Translation
Expanding far beyond traditional applications in optical interconnects at
telecommunications wavelengths, the silicon nanophotonic integrated circuit
platform has recently proven its merits for working with mid-infrared (mid-IR)
optical signals in the 2-8 {\mu}m range. Mid-IR integrated optical systems are
capable of addressing applications including industrial process and
environmental monitoring, threat detection, medical diagnostics, and free-space
communication. Rapid progress has led to the demonstration of various silicon
components designed for the on-chip processing of mid-IR signals, including
waveguides, vertical grating couplers, microcavities, and electrooptic
modulators. Even so, a notable obstacle to the continued advancement of
chip-scale systems is imposed by the narrow-bandgap semiconductors, such as
InSb and HgCdTe, traditionally used to convert mid-IR photons to electrical
currents. The cryogenic or multi-stage thermo-electric cooling required to
suppress dark current noise, exponentially dependent upon the ratio Eg/kT, can
limit the development of small, low-power, and low-cost integrated optical
systems for the mid-IR. However, if the mid-IR optical signal could be
spectrally translated to shorter wavelengths, for example within the
near-infrared telecom band, photodetectors using wider bandgap semiconductors
such as InGaAs or Ge could be used to eliminate prohibitive cooling
requirements. Moreover, telecom band detectors typically perform with higher
detectivity and faster response times when compared with their mid-IR
counterparts. Here we address these challenges with a silicon-integrated
approach to spectral translation, by employing efficient four-wave mixing (FWM)
and large optical parametric gain in silicon nanophotonic wires
Measurement of the main and critical parameters for optimal laser treatment of heart disease
Abstract: Laser light is frequently used in the diagnosis and treatment of patients. As in traditional treatments such as medication, bypass surgery, and minimally invasive ways, laser treatment can also fail and present serious side effects. The true reason for laser treatment failure or the side effects thereof, remains unknown. From the literature review conducted, and experimental results generated we conclude that an optimal laser treatment for coronary artery disease (named heart disease) can be obtained if certain critical parameters are correctly measured and understood. These parameters include the laser power, the laser beam profile, the fluence rate, the treatment time, as well as the absorption and scattering coefficients of the target treatment tissue. Therefore, this paper proposes different, accurate methods for the measurement of these critical parameters to determine the optimal laser treatment of heart disease with a minimal risk of side effects. The results from the measurement of absorption and scattering properties can be used in a computer simulation package to predict the fluence rate. The computing technique is a program based on the random number (Monte Carlo) process and probability statistics to track the propagation of photons through a biological tissue
Evaluation of a fiberoptic-based system for measurement of optical properties in highly attenuating turbid media
BACKGROUND: Accurate measurements of the optical properties of biological tissue in the ultraviolet A and short visible wavelengths are needed to achieve a quantitative understanding of novel optical diagnostic devices. Currently, there is minimal information on optical property measurement approaches that are appropriate for in vivo measurements in highly absorbing and scattering tissues. We describe a novel fiberoptic-based reflectance system for measurement of optical properties in highly attenuating turbid media and provide an extensive in vitro evaluation of its accuracy. The influence of collecting reflectance at the illumination fiber on estimation accuracy is also investigated. METHODS: A neural network algorithm and reflectance distributions from Monte Carlo simulations were used to generate predictive models based on the two geometries. Absolute measurements of diffuse reflectance were enabled through calibration of the reflectance system. Spatially-resolved reflectance distributions were measured in tissue phantoms at 405 nm for absorption coefficients (μ(a)) from 1 to 25 cm(-1 )and reduced scattering coefficients ([Formula: see text]) from 5 to 25 cm(-1). These data and predictive models were used to estimate the optical properties of tissue-simulating phantoms. RESULTS: By comparing predicted and known optical properties, the average errors for μ(a )and [Formula: see text] were found to be 3.0% and 4.6%, respectively, for a linear probe approach. When bifurcated probe data was included and samples with μ(a )values less than 5 cm(-1 )were excluded, predictive errors for μ(a )and [Formula: see text] were further reduced to 1.8% and 3.5%. CONCLUSION: Improvements in system design have led to significant reductions in optical property estimation error. While the incorporation of a bifurcated illumination fiber shows promise for improving the accuracy of [Formula: see text] estimates, further study of this approach is needed to elucidate the source of discrepancies between measurements and simulation results at low μ(a )values
Development and Validation of the Behavioral Tendencies Questionnaire
At a fundamental level, taxonomy of behavior and behavioral tendencies can be described
in terms of approach, avoid, or equivocate (i.e., neither approach nor avoid). While there are
numerous theories of personality, temperament, and character, few seem to take advantage
of parsimonious taxonomy. The present study sought to implement this taxonomy by
creating a questionnaire based on a categorization of behavioral temperaments/tendencies
first identified in Buddhist accounts over fifteen hundred years ago. Items were developed
using historical and contemporary texts of the behavioral temperaments, described as
“Greedy/Faithful”, “Aversive/Discerning”, and “Deluded/Speculative”. To both maintain
this categorical typology and benefit from the advantageous properties of forced-choice
response format (e.g., reduction of response biases), binary pairwise preferences for items
were modeled using Latent Class Analysis (LCA). One sample (n1 = 394) was used to estimate
the item parameters, and the second sample (n2 = 504) was used to classify the participants
using the established parameters and cross-validate the classification against
multiple other measures. The cross-validated measure exhibited good nomothetic span
(construct-consistent relationships with related measures) that seemed to corroborate the
ideas present in the original Buddhist source documents. The final 13-block questionnaire
created from the best performing items (the Behavioral Tendencies Questionnaire or BTQ)
is a psychometrically valid questionnaire that is historically consistent, based in behavioral
tendencies, and promises practical and clinical utility particularly in settings that teach and
study meditation practices such as Mindfulness Based Stress Reduction (MBSR)
Serum amyloid A primes microglia for ATP-dependent interleukin-1\u3b2 release
Acute-phase response is a systemic reaction to environmental/inflammatory insults and involves production of acute-phase proteins, including serum amyloid A (SAA). Interleukin-1\u3b2 (IL-1\u3b2), a master regulator of neuroinflammation produced by activated inflammatory cells of the myeloid lineage, in particular microglia, plays a key role in the pathogenesis of acute and chronic diseases of the peripheral nervous system and CNS. IL-1\u3b2 release is promoted by ATP acting at the purinergic P2X7 receptor (P2X7R) in cells primed with toll-like receptor (TLR) ligands
- …