235 research outputs found

    Cost-effectiveness of dapagliflozin for patients with heart failure across the spectrum of ejection fraction:A pooled analysis of DAPA-HF and DELIVER data

    Get PDF
    Aim: To assess the cost-effectiveness of dapagliflozin in addition to usual care, compared with usual care alone, in a large population of patients with heart failure (HF), spanning the full range of left ventricular ejection fraction (LVEF). Methods and results: Patient-level data were pooled from HF trials (DAPA-HF, DELIVER) to generate a population including HF with reduced, mildly reduced and preserved LVEF, to increase statistical power and enable exploration of interactions among LVEF, renal function and N-terminal pro-B-type natriuretic peptide levels, as they are relevant determinants of health status in this population. Survival and HF recurrent event risk equations were derived and applied to a lifetime horizon Markov model with health states defined by Kansas City Cardiomyopathy Questionnaire total symptom score quartiles; costs and utilities were in the UK setting. The base case incremental cost-effectiveness ratio (ICER) was £6470 per quality-adjusted life year (QALY) gained, well below the UK willingness-to-pay (WTP) threshold of £20 000/QALY gained. In interaction sensitivity analyses, the highest ICER was observed for elderly patients with preserved LVEF (£16 624/QALY gained), and ranged to a region of dominance (increased QALYs, decreased costs) for patients with poorer renal function and reduced/mildly reduced LVEF. Results across the patient characteristic interaction plane were mostly between £5000 and £10 000/QALY gained. Conclusions: Dapagliflozin plus usual care, versus usual care alone, yielded results well below the WTP threshold for the UK across a heterogeneous population of patients with HF including the full spectrum of LVEF, and is likely a cost-effective intervention.</p

    Cost-effectiveness of dapagliflozin for patients with heart failure across the spectrum of ejection fraction:A pooled analysis of DAPA-HF and DELIVER data

    Get PDF
    Aim: To assess the cost-effectiveness of dapagliflozin in addition to usual care, compared with usual care alone, in a large population of patients with heart failure (HF), spanning the full range of left ventricular ejection fraction (LVEF). Methods and results: Patient-level data were pooled from HF trials (DAPA-HF, DELIVER) to generate a population including HF with reduced, mildly reduced and preserved LVEF, to increase statistical power and enable exploration of interactions among LVEF, renal function and N-terminal pro-B-type natriuretic peptide levels, as they are relevant determinants of health status in this population. Survival and HF recurrent event risk equations were derived and applied to a lifetime horizon Markov model with health states defined by Kansas City Cardiomyopathy Questionnaire total symptom score quartiles; costs and utilities were in the UK setting. The base case incremental cost-effectiveness ratio (ICER) was £6470 per quality-adjusted life year (QALY) gained, well below the UK willingness-to-pay (WTP) threshold of £20 000/QALY gained. In interaction sensitivity analyses, the highest ICER was observed for elderly patients with preserved LVEF (£16 624/QALY gained), and ranged to a region of dominance (increased QALYs, decreased costs) for patients with poorer renal function and reduced/mildly reduced LVEF. Results across the patient characteristic interaction plane were mostly between £5000 and £10 000/QALY gained. Conclusions: Dapagliflozin plus usual care, versus usual care alone, yielded results well below the WTP threshold for the UK across a heterogeneous population of patients with HF including the full spectrum of LVEF, and is likely a cost-effective intervention.</p

    Sedentarismo, exercício físico e doenças crônicas

    Get PDF
    A inatividade física é fortemente relacionada à incidência e severidade de um vasto número de doenças crônicas. Assim sendo, o exercício físico torna-se uma das ferramentas terapêuticas mais importantes na promoção de saúde e o profissional de Educação Física, o responsável por sua ampla disseminação. Nesse artigo, discorremos sobre as seguintes questões: Qual o impacto - biológico e socioeconômico - da inatividade física na saúde dos indivíduos?; 2) Qual o impacto da inserção da atividade física vida dos indivíduos?; 3) Qual o papel da profissional de Educação Física na promoção de saúde e quais os desafios que a Educação Física, enquanto ciência ("lato sensu") e profissão, deve enfrentar nas próximas décadas? Tendo como ponto de partida o papel da inatividade física sobre a etiologia das doenças crônicas, pretendemos revelar o imenso potencial do exercício físico como agente terapêutico.Physical inactivity is strongly related to the incidence and severity of a number of chronic diseases. Hence, physical exercise emerges as one of the most important therapeutic tool to health promotion, with the Physical Education professional being the responsible for disseminating it widely. In this manuscript, we will discuss the following questions: 1) What is the social and biological impact of physical inactivity on overall health? 2) What is the impact of physical activity on people's lives? 3) What is the role of the Physical Education professional in the promotion of health and what are the challenges that Physical Education Discipline, as a science ("lato sensu") and profession, will face in the next decades? Having in mind the role of physical inactivity upon the etiology of chronic diseases, we intend to reveal the large potential of physical exercise as a therapeutic agent

    Cold sintering of bioglass and bioglass/polymer composites

    Get PDF
    Bioactive glasses are widely utilized to regenerate bone tissue and aid bonding of orthopedic implants. Forming composites of bioglass with bioactive polymers allow the mechanical properties and biological response to be tailored. Although several methods for creating bioglass–polymer composites exist, they require dissolution of the polymer, controlled phase separation, and appear to have an upper limit of ∼30 vol.% bioglass. Cold sintering is a novel technique for the densification of ceramics and glasses which utilizes a liquid phase and pressure to allow the production of components at reduced temperatures. We demonstrate that cold sintering (100°C) of Bioglass 45S5 powder produced via flame spray pyrolysis and the fabrication of Bioglass 45S5–polymer composites. Assessment of the in vitro response revealed that composites were not cytotoxic. Solid-state 31P and 29Si MAS NMR studies of the silicon and phosphorus speciation in the glass powder, as-received, wetted, and sintered samples show similarities to reactions expected when bioglass is implanted in the body which along with Raman spectroscopy data gave insight into the cold sintering densification mechanism

    Search for gravitational waves from Scorpius X-1 in the second Advanced LIGO observing run with an improved hidden Markov model

    Get PDF
    We present results from a semicoherent search for continuous gravitational waves from the low-mass x-ray binary Scorpius X-1, using a hidden Markov model (HMM) to track spin wandering. This search improves on previous HMM-based searches of LIGO data by using an improved frequency domain matched filter, the J-statistic, and by analyzing data from Advanced LIGO's second observing run. In the frequency range searched, from 60 to 650 Hz, we find no evidence of gravitational radiation. At 194.6 Hz, the most sensitive search frequency, we report an upper limit on gravitational wave strain (at 95% confidence) of h095%=3.47×10-25 when marginalizing over source inclination angle. This is the most sensitive search for Scorpius X-1, to date, that is specifically designed to be robust in the presence of spin wandering. © 2019 American Physical Society

    Study of Z → llγ decays at √s = 8 TeV with the ATLAS detector

    Get PDF
    This paper presents a study of Z → llγ decays with the ATLAS detector at the Large Hadron Collider. The analysis uses a proton–proton data sample corresponding to an integrated luminosity of 20.2 fb−1 collected at a centre-ofmass energy √s = 8 TeV. Integrated fiducial cross-sections together with normalised differential fiducial cross-sections, sensitive to the kinematics of final-state QED radiation, are obtained. The results are found to be in agreement with stateof-the-art predictions for final-state QED radiation. First measurements of Z → llγ γ decays are also reported

    Search for leptoquark pair production decaying into te−te¯ + or tμ−t¯μ+ in multi-lepton final states in pp collisions at √s = 13 TeV with the ATLAS detector

    Get PDF
    A search for leptoquark pair production decaying into te−te¯ + or tμ−t¯μ+ in final states with multiple leptons is presented. The search is based on a dataset of pp collisions at √s = 13 TeV recorded with the ATLAS detector during Run 2 of the Large Hadron Collider, corresponding to an integrated luminosity of 139 fb−1. Four signal regions, with the requirement of at least three light leptons (electron or muon) and at least two jets out of which at least one jet is identified as coming from a b-hadron, are considered based on the number of leptons of a given flavour. The main background processes are estimated using dedicated control regions in a simultaneous fit with the signal regions to data. No excess above the Standard Model background prediction is observed and 95% confidence level limits on the production cross section times branching ratio are derived as a function of the leptoquark mass. Under the assumption of exclusive decays into te− (tμ−), the corresponding lower limit on the scalar mixed-generation leptoquark mass mLQd mix is at 1.58 (1.59) TeV and on the vector leptoquark mass mU˜1 at 1.67 (1.67) TeV in the minimal coupling scenario and at 1.95 (1.95) TeV in the Yang–Mills scenario

    Constraints on spin-0 dark matter mediators and invisible Higgs decays using ATLAS 13 TeV pp collision data with two top quarks and missing transverse momentum in the final state

    Get PDF
    This paper presents a statistical combination of searches targeting final states with two top quarks and invisible particles, characterised by the presence of zero, one or two leptons, at least one jet originating from a b-quark and missing transverse momentum. The analyses are searches for phenomena beyond the Standard Model consistent with the direct production of dark matter in pp collisions at the LHC, using 139 fb−1 of data collected with the ATLAS detector at a centre-of-mass energy of 13 TeV. The results are interpreted in terms of simplified dark matter models with a spin-0 scalar or pseudoscalar mediator particle. In addition, the results are interpreted in terms of upper limits on the Higgs boson invisible branching ratio, where the Higgs boson is produced according to the Standard Model in association with a pair of top quarks. For scalar (pseudoscalar) dark matter models, with all couplings set to unity, the statistical combination extends the mass range excluded by the best of the individual channels by 50 (25) GeV, excluding mediator masses up to 370 GeV. In addition, the statistical combination improves the expected coupling exclusion reach by 14% (24%), assuming a scalar (pseudoscalar) mediator mass of 10 GeV. An upper limit on the Higgs boson invisible branching ratio of 0.38 (0.30+0.13−0.09) is observed (expected) at 95% confidence level

    Software performance of the ATLAS track reconstruction for LHC run 3

    Get PDF
    Charged particle reconstruction in the presence of many simultaneous proton–proton (pp) collisions in the LHC is a challenging task for the ATLAS experiment’s reconstruction software due to the combinatorial complexity. This paper describes the major changes made to adapt the software to reconstruct high-activity collisions with an average of 50 or more simultaneous pp interactions per bunch crossing (pileup) promptly using the available computing resources. The performance of the key components of the track reconstruction chain and its dependence on pile-up are evaluated, and the improvement achieved compared to the previous software version is quantified. For events with an average of 60 pp collisions per bunch crossing, the updated track reconstruction is twice as fast as the previous version, without significant reduction in reconstruction efficiency and while reducing the rate of combinatorial fake tracks by more than a factor two
    corecore