326 research outputs found
Processing and electromechanical properties of lanthanum-doped Pb(Zr,Ti)O3 extruded piezoelectric fibres
This article describes the processing and characterisation of lanthanum-doped lead zirconate titanate (PLZT)-based ferroelectric fibres for composite transducer applications. X-ray diffraction of the extruded and sintered fibres indicated some lead loss during sintering; however, the fibres exhibited low porosity (1.54%), high maximum piezoelectric strain (4041ppm) and relatively low coercive field (0.77kV/mm). The low coercive field of the lanthanum-doped fibres may be advantageous in terms of facilitating polarization of the fibres in composite architecture
EBSD mapping of herringbone domain structures in tetragonal piezoelectrics
Herringbone domain structures have been mapped using electron backscatter diffraction (EBSD) in two tetragonal piezoelectrics, lead zirconate titanate, [Pb(Zr,Ti)O<sub>3</sub>] and bismuth ferrite â lead titanate, [(PbTi)<sub>0.5</sub>(BiFe)<sub>0.5</sub>O<sub>3</sub>]. Analysis of the domain misorientations across the band junctions shows that the structures correspond very well to crystallographic models. High resolution mapping with a 20 nm step size allowed the crystal rotation across one of these band junctions in lead zirconate titanate to be studied in detail and allowed an improved estimation of the peak strain at the junction, of 0.56 GPa. The significance of this for crack nucleation and propagation in such materials is discussed
Microstructure development of BiFeO3-PbTiO3 films deposited by pulsed laser deposition on platinum substrates
BiFeO3-PbTiO3 films around the morphotropic phase boundary were deposited by pulsed laser deposition on polycrystalline Pt/TiOx/SiO2/Si substrates. X-ray analysis confirms that 0.6BiFeO3-0.4PbTiO3 films are (0 0 1) tetragonal preferentially orientated due to lattice matching with the underlying substrate. The misfit strain at the substrate-film interface is relieved by a âŒ19% orientation transformation from (0 0 1) to (1 0 0) due to the lattice mismatch at the substrate-film interface and the difference in thermal expansion coefficients of the substrate and deposited film. 0.7BiFeO3-0. 3PbTiO3 films are mixed-phase rhombohedral-tetragonal with (0 0 1)/(1 1 1) preferential orientation due to the lattice match to the (1 1 1) and (1 0 0) of the underlying platinum as well as to being close to the morphotropic phase boundary. Inconsistent structural and electrical properties in reported BiFeO3-PbTiO3 films are explained in terms of film morphology and diffusion of bismuth into platinum. Films below âŒ220 nm thickness produce short circuits due to a Volmer-Weber growth mechanism which results in physical defects within the films. Films above this critical thickness also produce variable electrical properties due to diffusion of bismuth into the underlying platinum electrode which has been confirmed by energy dispersive X-ray spectroscopy
Crystallographic and magnetic identification of secondary phase in orientated Bi5Fe0.5Co0.5Ti3O15 ceramics
Oxide materials which exhibit both ferroelectricity
and ferromagnetism are of great interest for sensors and memory
applications. Layered bismuth titanates with an Aurivillius
structure, (BiFeO3)nBi4Ti3O12, can possess ferroelectric and
ferromagnetic order parameters simultaneously. It has recently
been demonstrated that one such example,
Bi5Fe0.5Co0.5Ti3O15,where n = 1 with half the Fe3+ sites substituted
by Co3+ ions, exhibits both ferroelectric and ferromagnetic
properties at room temperature. Here we report the fabrication
of highly-oriented polycrystalline ceramics of this material,
prepared via molten salt synthesis and uniaxial pressing of high
aspect ratio platelets. Electron backscatter images showed that
there is a secondary phase within the ceramic matrix which is
rich in cobalt and iron, hence this secondary phase could
contribute in the main phase ferromagnetic property. The
concentration of the secondary phase obtained from secondary
electron microscopy is estimated at less than 2.5 %, below the
detection limit of XRD. TEM was used to identify the
crystallographic structure of the secondary phase, which was
shown to be cobalt ferrite, CoFe2O4. It is inferred from the data
that the resultant ferromagnetic response identified using VSM
measurements was due to the presence of the minor secondary
phase. The Remanent magnetization at room temperature was
Mr â 76 memu/g which dropped down to almost zero (Mr â 0.8
memu/g) at 460 oC, far lower than the anticipated for CoFe2O4
Evaluating year-to-year anomalies in tropical wetland methane emissions using satellite CHâ observations
Natural wetlands are the largest source of methane emissions, contributing 20â40% of global emissions and dominating the inter-annual variability. Large uncertainties remain on their variability and response to climate change. This study uses atmospheric methane observations from the GOSAT satellite to evaluate methane wetland emission estimates. We assess how well simulations reproduce the observed methane inter-annual variability by evaluating the detrended seasonal cycle. The latitudinal means agree well but maximum differences in the tropics of 28.1â34.8 ppb suggest that all simulations fail to capture the extent of the tropical wetland seasonal cycle. We focus further analysis on the major natural wetlands in South America: the seasonally flooded savannah of the Pantanal (Brazil) and Llanos de Moxos (Bolivia) regions; and the riverine wetlands formed by the ParanĂĄ River (Argentina). We see large discrepancies between simulation and observation over the Pantanal and Llanos de Moxos region in 2010, 2011 and 2014 and over the ParanĂĄ River region in 2010 and 2014. We find highly consistent behaviour between the time and location of these methane anomalies and the change in wetland extent, driven by precipitation related to El Niño Southern Oscillation activity. We conclude that the inability of land surface models to increase wetland extent through overbank inundation is the primary cause of these observed discrepancies and can lead to under-estimation of methane fluxes by as much as 50% (5.3â11.8 Tg yr â1 ) of the observed emissions for the combined Pantanal and ParanĂĄ regions. As the hydrology of these regions is heavily linked to ENSO variability, being able to reproduce changes in wetland behaviour is important for successfully predicting their methane emissions
Combinatorial microfluidic droplet engineering for biomimetic material synthesis
Although droplet-based systems are used in a wide range of technologies, opportunities for systematically customizing their interface chemistries remain relatively unexplored. This article describes a new microfluidic strategy for rapidly tailoring emulsion droplet compositions and properties. The approach utilizes a simple platform for screening arrays of droplet-based microfluidic devices and couples this with combinatorial selection of the droplet compositions. Through the application of genetic algorithms over multiple screening rounds, droplets with target properties can be rapidly generated. The potential of this method is demonstrated by creating droplets with enhanced stability, where this is achieved by selecting carrier fluid chemistries that promote titanium dioxide formation at the droplet interfaces. The interface is a mixture of amorphous and crystalline phases, and the resulting composite droplets are biocompatible, supporting in vitro protein expression in their interiors. This general strategy will find widespread application in advancing emulsion properties for use in chemistry, biology, materials and medicine
Recommended from our members
Increased importance of methane reduction for a 1.5 degree target
To understand the importance of methane on the levels of carbon emission reductions required to achieve temperature goals, a processed-based approach is necessary rather than reliance on the Transient Climate Response to Emissions. We show that plausible levels of methane (CH4) mitigation can make a substantial difference to the feasibility of achieving the Paris climate targets through increasing the allowable carbon emissions. This benefit is enhanced by the indirect effects of CH4 on ozone (O3). Here the differing effects of CH4 and CO2 on land carbon storage, including the effects of surface O3, lead to an additional increase in the allowable carbon emissions with CH4 mitigation. We find a simple robust relationship between the change in the 2100 CH4 concentration and the extra allowable cumulative carbon emissions between now and 2100 (0.27 ± 0.05 GtC per ppb CH4). This relationship is independent of modelled climate sensitivity and precise temperature target, although later mitigation of CH4 reduces its value and thus methane reduction effectiveness. Up to 12% of this increase in allowable emissions is due to the effect of surface ozone. We conclude early mitigation of CH4 emissions would significantly increase the feasibility of stabilising global warming below 1.5C, alongside having co-benefits for human and ecosystem health
Rsp5/âNedd4 is the main ubiquitin ligase that targets cytosolic misfolded proteins following heat stress
The heat-shock response is a complex cellular program that induces major changes in protein translation, folding and degradation to alleviate toxicity caused by protein misfolding. Although heat shock has been widely used to study proteostasis, it remained unclear how misfolded proteins are targeted for proteolysis in these conditions. We found that âRsp5 and its mammalian homologue âNedd4 are important E3 ligases responsible for the increased ubiquitylation induced by heat stress. We determined that âRsp5 ubiquitylates mainly cytosolic misfolded proteins upon heat shock for proteasome degradation. We found that ubiquitylation of heat-induced substrates requires the Hsp40 co-chaperone âYdj1 that is further associated with âRsp5 upon heat shock. In addition, ubiquitylation is also promoted by PY âRsp5-binding motifs found primarily in the structured regions of stress-induced substrates, which can act as heat-induced degrons. Our results support a bipartite recognition mechanism combining direct and chaperone-dependent ubiquitylation of misfolded cytosolic proteins by âRsp5
Recommended from our members
Flexible parameter-sparse global temperature time-profiles that stabilise at 1.5C and 2.0C
The meeting of the United Nations Framework Convention on Climate Change (UNFCCC) in December 2015 committed parties to the Convention to hold the rise in global average temperature to well below 2.0 C above pre-industrial levels. It also committed the parties to pursue efforts to limit warming to 1.5 C. This leads to two key questions. First,what extent of emission reductions will achieve either target? Second, what is the benefit of the reduced climate impacts by keeping warming at or below 1.5 C? To provide answers, climate model simulations need to follow trajectories consistent
with these global temperature limits. It is useful to operate models in an inverse mode to make model-specific estimates of greenhouse gas (GHG) concentration pathways consistent with the prescribed temperature profiles. Further inversion derives related emissions pathways for these concentrations. For this to happen, and to enable climate research centres to compare GHG concentrations and emissions estimates, common temperature trajectory scenarios are required. Here we define algebraic
curves which asymptote to a stabilised limit, while also matching the magnitude and gradient of recent warming levels. The curves are deliberately parameter-sparse, needing prescription of just two parameters plus the final temperature. Yet despite this simplicity, they can allow for temperature overshoot and for generational changes where more effort to decelerate warming
change is needed by future generations. The curves capture temperature profiles from the existing Representative Concentration Pathway (RCP2.6) scenario projections by a range of different earth system models (ESMs), which have warming amounts towards the lower levels of those that society is discussing
- âŠ