A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding

The final publication is available at Springer via http://dx.doi.org/10.1007/s12289-015-1225-zThis paper addresses the numerical simulation of void formation and transport during mold filling in Resin Transfer Molding (RTM). The saturation equation, based on a two-phase flow model resin/air, is coupled with Darcy s law and mass conservation to simulate the unsaturated filling flow that takes place in a RTM mold when resin is injected through the fiber bed. These equations lead to a system composed of an advection diffusion equation for saturation including capillary effects and an elliptic equation for pressure taking into account the effect of air residual saturation. The model introduces the relative permeability as a function of resin saturation. When capillary effects are omitted, the hyperbolic nature of the saturation equation and its strong coupling with Darcy equation through relative permeability represent a challenging numerical issue. The combination of the constitutive physical laws relating permeability to saturation with the coupled system of the pressure and saturation equations allows predicting the saturation profiles. The model was validated by comparison with experimental data obtained for a fiberglass reinforcement injected in a RTM mold at constant flow rate. The saturation measured as a function of time during the resin impregnation of the fiber bed compared very well with numerical predictions.The authors acknowledge financial support of the Spanish Government (Projects DPI2010-20333 and DPI2013-44903-R-AR), of the National Science and Research Council of Canada (NSERC) and of the Canada Reseach Chair (CRC) program.Gascón Martínez, ML.; García Manrique, JA.; Lebel, F.; Ruiz, E.; Trochu, F. (2016). A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding. International Journal of Material Forming. 9(2):229-239. doi:10.1007/s12289-015-1225-zS22923992Patel N, Lee LJ (1996) Modeling of void formation and removal in liquid composite molding. Part I: wettability analysis. Polym Compos 17(1):96–103Ruiz E, Achim V, Soukane S, Trochu F, Bréard J (2006) Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites. Compos Sci Technol 66(3–4):475–486Trochu F, Ruiz E, Achim V, Soukane S (2006) Advanced numerical simulation of liquid composite molding for process analysis and optimization. Compos A: Appl Sci Manuf 37(6):890–902Park CH, Lee W (2011) Modeling void formation and unsaturated flow in liquid composite molding processes: a survey and review. J Reinf Plast Compos 30(11):957–977Pillai KM (2004) Modeling the unsaturated flow in liquid composite molding processes: a review and some thoughts. J Compos Mater 38(23):2097–2118Breard J, Saouab A, Bouquet G (2003) Numerical simulation of void formation in LCM. Compos A: Appl Sci Manuf 34:517–523Breard J, Henzel Y, Trochu F, Gauvin R (2003) Analysis of dynamic flows through porous media. Part I: comparison between saturated and unsaturated flows in fibrous reinforcements. Polym Compos 24(3):391–408Parnas RS, Phelan FR Jr (1991) The effect of heterogeneous porous media on mold filling in Resin Transfer Molding. SAMPE Q 22(2):53–60Parseval DY, Pillai KM, Advani SG (1997) A simple model for the variation of permeability due to partial saturation in dual scale porous media. Transp Porous Media 27(3):243–264Pillai KM (2002) Governing equations for unsaturated flow through woven fiber mats. Part 1. Isothermal flows. Compos A: Appl Sci Manuf 33(7):1007–1019Simacek P, Advani SG (2003) A numerical model to predict fiber tow saturation during Liquid Composite Molding. Compos Sci Technol 63:1725–1736García JA, Gascón L, Chinesta F (2010) A flux limiter strategy for solving the saturation equation in RTM process simulation. Compos A: Appl Sci Manuf 41:78–82Chui WK, Glimm J, Tangerman FM, Jardine AP, Madsen JS, Donnellan TM, Leek R (1997) Process modeling in Resin Transfer Molding as a method to enhance product quality. SIAM Rev 39(4):714–727Nordlund M, Michaud V (2012) Dynamic saturation curve measurement for resin flow in glass fibre reinforcement. Compos A: Appl Sci Manuf 43:333–343García JA, Ll G, Chinesta F (2003) A fixed mesh numerical method for modelling the flow in liquid composites moulding processes using a volume of fluid technique. Comput Methods Appl Mech Eng 192(7–8):877–893García JA, Ll G, Chinesta F, Trochu F, Ruiz E (2010) An efficient solver of the saturation equation in liquid composite molding processes. Int J Mater Form 3(2):1295–1302Lebel F (2012) Contrôle de la fabrication des composites par injection sur renforts. École Polytechnique de Montréal, CanadaVan Genuchten MT (1980) Closed-form equation for predicting the hydraulic conductivity of unsaturated soils. Soil Sci Soc Am J 44(5):892–898Buckley SE, Leverett MC (1942) Mechanism of fluid displacement in sands. Pet Trans AWME 146:107–116Lundstrom TS, Gebart BR (1994) Influence from process parameters on void formation in Resin Transfer Molding. Polym Compos 15(1):25–33Lundstrom TS (1997) Measurement of void collapse during Resin Transfer Molding. Compos A: Appl Sci Manuf 28(3):201–214Lundstrom TS, Frishfelds V, Jakovics A (2010) Bubble formation and motion in non-crimp fabrics with perturbed bundle geometry. Compos A: Appl Sci Manuf 41:83–92Lebel F, Fanaei A, Ruiz E, Trochu F (2012) Experimental characterization by fluorescence of capillary flows in the fiber tows of engineering fabrics. Open J Inorg Non-Metallic Mater 2(3):25–45Brooks RH, Corey AT (1964) Hydraulic properties of porous media. Colorado State University. Hydrology Papers 1–37Corey AT (1954) The interrelation between gas and oil relative permeabilities. Prod Monthly 19(1):38–4

Influence of Bi and Mn on the green luminescence of ZnO ceramics

The effect of the addition of Bi and Mn on the photoluminescence from ZnO ceramics has been investigated. The effect of the presence of impurities on the green luminescence band can be compared to the effect of oxidizing treatments. A narrow green band has been observed in Mn‐doped samples

Analysis of a low ozone episode over Extremadura (Spain) in January 2006 and its influence on UV radiation

The main objectives of this work are to analyze, firstly, the detail of the causes of a low ozone event which occurred in January 2006 and, secondly, the related effects of this anomalous episode on ultraviolet (UV) radiation measured at three locations in Extremadura (South-Western Spain). On 19 January 2006, the OMI total ozone column (TOC) was 16–20% below the January mean value of TOMS/NASA TOC (period 1996–2005). The back trajectories analysis with the HYSplit model indicates that the notable decrease of TOC could be attributed to a fast rise of the isentropic trajectories height. Concomitantly, UV erythemal radiation greatly increases (between 23% and 37%) on 19 January 2006 respect to UV erythemal radiation measured on 19 January 2005. This notable increase in winter UV solar radiation may involve harmful effects for organisms adapted to receive less radiation during that season (e.g. early developmental stages of terrestrial plants and phytoplankton)

J. A. García Martínez: Arte y pensamiento en el siglo XX. Buenos Aires, Eudeba, 1973; 130 pgs.

Fil: Muñoz, Luis

Escritos en memoria de Leonardo Polo, I: Ser y conocer Cuadernos de Pensamiento Español, nº 54 [RESEÑA]

J. A. García (Ed.), Escritos en memoria de Leonardo Polo, I: Ser y conocer Cuadernos de Pensamiento Español, nº 54, Servicio de Publicaciones de la Universidad de Navarra, Pamplona, 2014, 164 pp. - Escritos en memoria de Leonardo Polo, I

X-ray/gamma-ray flux correlations in the BL Lacs Mrk 421 and 501 using HAWC data

The HAWC gamma ray observatory is located at the Sierra Negra Volcano in Puebla, Mexico, at an altitude of 4,100 meters. HAWC is a wide field of view array of 300 water Cherenkov detectors that are continuously surveying ~ 2sr of the sky, operating since March 2015. The large collected data sample allows HAWC to perform an unbiased monitoring of the BL Lac Mrk 421. This is the closest and brightest known extragalactic high-synchrotron-peaked BL Lac in the gamma-ray/X- ray bands and is extensively monitored by the Large Area Telescope (LAT) on-board the Fermi satellite, and the BAT and XRT instruments of the Swift satellite. In this work, we use 25 months of HAWC data together with Swift-XRT data to characterize potential correlations between both wavelengths. This analysis shows that HAWC and Swift-XRT data are correlated even stronger than expected for quasi-simultaneous observations.Comment: Presented at the 35th International Cosmic Ray Conference (ICRC2017), Bexco, Busan, Korea. See arXiv:1708.02572 for all HAWC contribution

Hipertiroidismo secundario a coriocarcinoma metastásico, reporte de caso

Aunque la enfermedad de Graves sigue siendo considerada la causa más frecuente de hipertiroidismo clínico en el embarazo, la producción desproporcionadamente alta de gonadotropina coriónica humana (HCG) como ocurre en la enfermedad trofoblástica gestacional (ETG), es otra de las posibles causas, debido a la analogía entre ésta (HCG) y la TSH. Presentamos el caso de una paciente de 23 años que consulta por presentar dolor pélvico de moderada intensidad, síntomas respiratorios, taquicardia, temblor, astenia y pérdida de peso; a quien se le diagnostica coriocarcinoma metastásico a pulmón, con tirotoxicosis asociada, por lo que requirió manejo quimioterapéutico y antitiroideo. Se presenta este caso, por ser el hipertiroidismo secundario a coriocarcinoma una patología poco frecuente pero que debe diagnosticarse y tratarse oportunamente, ya que de eso depende el pronóstico del paciente

Using ORB, BoW and SVM to identify and track tagged Norway lobster Nephrops norvegicus (L.)

Sustainable capture policies of many species strongly depend on the understanding of their social behaviour. Nevertheless, the analysis of emergent behaviour in marine species poses several challenges. Usually animals are captured and observed in tanks, and their behaviour is inferred from their dynamics and interactions. Therefore, researchers must deal with thousands of hours of video data. Without loss of generality, this paper proposes a computer vision approach to identify and track specific species, the Norway lobster, Nephrops norvegicus. We propose an identification scheme were animals are marked using black and white tags with a geometric shape in the center (holed triangle, filled triangle, holed circle and filled circle). Using a massive labelled dataset; we extract local features based on the ORB descriptor. These features are a posteriori clustered, and we construct a Bag of Visual Words feature vector per animal. This approximation yields us invariance to rotation and translation. A SVM classifier achieves generalization results above 99%. In a second contribution, we will make the code and training data publically available.Peer Reviewe