565 research outputs found
Recommended from our members
On analysis of chemical reactions coupled gas flows in SOFCs
This paper was presented at the 2nd Micro and Nano Flows Conference (MNF2009), which was held at Brunel University, West London, UK. The conference was organised by Brunel University and supported by the Institution of Mechanical Engineers, IPEM, the Italian Union of Thermofluid dynamics, the Process Intensification Network, HEXAG - the Heat Exchange Action Group and the Institute of Mathematics and its Applications.Solid oxide fuel cell (SOFC) is among others one of the most promising technologies for electricity energy generation. A recent new trends is to reduce its operating temperature from 1000oC to 800oC by
employing a thick porous layer as the supporting structure. Various transport processes occurred are strongly affected by catalytic chemical/electrochemical reactions appearing in nano- or/and microstructured and
multi-functional porous electrodes. It is particularly true if methane is used as the fuel, and internal reforming reactions within the microstructured porous anodes enable the conversion of the methane into H2
and CO. To deeply understand the chemical reaction coupled gas flow and heat transfer in the microstructured porous anode, a fully three-dimensional numerical calculation procedure (CFD) is developed and applied. The species mass/heat generation and consumption related to the internal reforming reactions and the electrochemical reaction have been identified and employed in the study. The variable thermalphysical
properties and transport parameters of the fuel gas mixture have also been taken into account. Furthermore, the heat transfer due to the fuel gas flow is implemented into the energy balance based on multi-component diffusion models. Finally, various issues connecting to the micro models of the surface
reactions are discussed and reviewed.Thi study is supported by the Swedish Research Council (VR) and the National Natural Science Foundation of China (NSFC-50706004)
On neural network modeling to maximize the power output of PEMFCs
Article number 136345Optimum operating conditions of a fuel cell will provide its maximum efficiency and the operating cost
will be minimized. Thus, operation optimization of the fuel cell is essential. Neural networks can
simulate systems without using simplifying assumptions. Therefore, the neural network can be used to
simulate complex systems. This paper investigates the effects of important parameters, i.e., temperature,
relative humidity in the cathode and anode, stoichiometry on the cathode and anode sides, on the po larization curve of a PEMFC (Proton Exchange Membrane Fuel Cell) having MPL (Micro Porous Layer) by
ANN (artificial neural network). For this purpose, an analytical model validated using laboratory data is
applied for prediction of the operating conditions providing maximum (and/or minimum) output power
of a PEM fuel cell for arbitrary values of the current. The mean absolute relative error was calculated to
1.95%, indicating that the network results represented the laboratory data very accurately. The results
show 23.6% and 28.9% increase of the power by the model and the network, respectively, when
comparing the maximum and minimum power outputs
Numerical investigation of conjugated heat transfer in a channel with a moving depositing front
This article presents numerical simulations of conjugated heat transfer in a fouled channel with a moving depositing front. The depositing front separating the fluid and the deposit layer is captured using the level-set method. Fluid flow is modeled by the incompressible Navier–Stokes equations. Numerical solution is performed on a fixed mesh using the finite volume method. The effects of Reynolds number and thermal conductivity ratio between the deposit layer and the fluid on local Nusselt number as well as length-averaged Nusselt number are investigated. It is found that heat transfer performance, represented by the local and length-averaged Nusselt number reduces significantly in a fouled channel compared with that in a clean channel. Heat transfer performance decreases with the growth of the deposit layer. Increases in Reynolds, Prandtl numbers both enhance heat transfer. Besides, heat transfer is enhanced when the thermal conductivity ratio between the deposit layer and the fluid is lower than 20 but it decreases when the thermal conductivity ratio is larger than 2
High-mobility group box-1 protein, lipopolysaccharide-binding protein, interleukin-6 and C-reactive protein in children with community acquired infections and bacteraemia: a prospective study
<p>Abstract</p> <p>Introduction</p> <p>Even though sepsis is one of the common causes of children morbidity and mortality, specific inflammatory markers for identifying sepsis are less studied in children. The main aim of this study was to compare the levels of high-mobility group box-1 protein (HMGB1), Lipopolysaccharide-binding protein (LBP), Interleukin-6 (IL-6) and C-reactive protein (CRP) between infected children without systemic inflammatory response syndrome (SIRS) and children with severe and less severe sepsis. The second aim was to examine HMGB1, LBP, IL6 and CRP as markers for of bacteraemia.</p> <p>Methods</p> <p>Totally, 140 children with suspected or proven infections admitted to the Children's Clinical University Hospital of Latvia during 2008 and 2009 were included. Clinical and demographical information as well as infection focus were assessed in all patients. HMGB1, LBP, IL-6 and CRP blood samples were determined. Children with suspected or diagnosed infections were categorized into three groups of severity of infection: (i) infected without SIRS (n = 36), (ii) sepsis (n = 91) and, (iii) severe sepsis (n = 13). They were furthermore classified according bacteraemia into (i) bacteremia (n = 30) and (ii) no bacteraemia (n = 74).</p> <p>Results</p> <p>There was no statistically significant difference in HMGB1 levels between children with different levels of sepsis or with and without bacteraemia. The levels of LBP, IL-6 and CRP were statistically significantly higher among patients with sepsis compared to those infected but without SIRS (<it>p </it>< 0.001). Furthermore, LBP, IL-6 and CRP were significantly higher in children with severe sepsis compared to those ones with less severe sepsis (<it>p </it>< 0.001). Median values of LBP, IL6 and CRP were significantly higher in children with bacteraemia compared to those without bacteraemia. The area under the receiver operating curve (ROC) for detecting bacteraemia was 0.87 for both IL6 and CRP and 0.82 for LBP, respectively.</p> <p>Conclusion</p> <p>Elevated levels of LBP, IL-6 and CRP were associated with a more severe level of infection in children. Whereas LBP, IL-6 and CRP seem to be good markers to detect patients with bacteraemia, HMGB1 seem to be of minor importance. LBP, IL-6 and CRP levels may serve as good biomarkers for identifying children with severe sepsis and bacteraemia and, thus, may be routinely used in clinical practice.</p
Use of anion-aromatic interactions to position the general base in the ketosteroid isomerase active site
A High-Sensitivity Method for Detection and Measurement of HMGB1 Protein Concentration by High-Affinity Binding to DNA Hemicatenanes
BACKGROUND: Protein HMGB1, an abundant nuclear non-histone protein that interacts with DNA and has an architectural function in chromatin, was strikingly shown some years ago to also possess an extracellular function as an alarmin and a mediator of inflammation. This extracellular function has since been actively studied, both from a fundamental point of view and in relation to the involvement of HMGB1 in inflammatory diseases. A prerequisite for such studies is the ability to detect HMGB1 in blood or other biological fluids and to accurately measure its concentration. METHODOLOGY/PRINCIPAL FINDINGS: In addition to classical techniques (western blot, ELISA) that make use of specific anti-HMGB1 antibodies, we present here a new, extremely sensitive technique that is based on the fact that hemicatenated DNA loops (hcDNA) bind HMGB1 with extremely high affinity, higher than the affinity of specific antibodies, similar in that respect to DNA aptamers. DNA-protein complexes formed between HMGB1 and radiolabeled hcDNA are analyzed by electrophoresis on nondenaturing polyacrylamide gels using the band-shift assay method. In addition, using a simple and fast protocol to purify HMGB1 on the basis of its solubility in perchloric acid allowed us to increase the sensitivity by suppressing any nonspecific background. The technique can reliably detect HMGB1 at a concentration of 1 pg per microliter in complex fluids such as serum, and at much lower concentrations in less complex samples. It compares favorably with ELISA in terms of sensitivity and background, and is less prone to interference from masking proteins in serum. CONCLUSION: The new technique, which illustrates the potential of DNA nanoobjects and aptamers to form high-affinity complexes with selected proteins, should provide a valuable tool to further investigate the extracellular functions of HMGB1 and its involvement in inflammatory pathologies
The Human Polyoma JC Virus Agnoprotein Acts as a Viroporin
Virus infections can result in a range of cellular injuries and commonly this involves both the plasma and intracellular membranes, resulting in enhanced permeability. Viroporins are a group of proteins that interact with plasma membranes modifying permeability and can promote the release of viral particles. While these proteins are not essential for virus replication, their activity certainly promotes virus growth. Progressive multifocal leukoencephalopathy (PML) is a fatal demyelinating disease resulting from lytic infection of oligodendrocytes by the polyomavirus JC virus (JCV). The genome of JCV encodes six major proteins including a small auxiliary protein known as agnoprotein. Studies on other polyomavirus agnoproteins have suggested that the protein may contribute to viral propagation at various stages in the replication cycle, including transcription, translation, processing of late viral proteins, assembly of virions, and viral propagation. Previous studies from our and other laboratories have indicated that JCV agnoprotein plays an important, although as yet incompletely understood role in the propagation of JCV. Here, we demonstrate that agnoprotein possesses properties commonly associated with viroporins. Our findings demonstrate that: (i) A deletion mutant of agnoprotein is defective in virion release and viral propagation; (ii) Agnoprotein localizes to the ER early in infection, but is also found at the plasma membrane late in infection; (iii) Agnoprotein is an integral membrane protein and forms homo-oligomers; (iv) Agnoprotein enhances permeability of cells to the translation inhibitor hygromycin B; (v) Agnoprotein induces the influx of extracellular Ca2+; (vi) The basic residues at amino acid positions 8 and 9 of agnoprotein key are determinants of the viroporin activity. The viroporin-like properties of agnoprotein result in increased membrane permeability and alterations in intracellular Ca2+ homeostasis leading to membrane dysfunction and enhancement of virus release
- …