CARACTERISATION D'UN LASER Nd : YAG CONTINU A MODES COUPLES

Pas de Résumé disponibl

Material screening and selection for XENON100

Results of the extensive radioactivity screening campaign to identify materials for the construction of XENON100 are reported. This Dark Matter search experiment is operated underground at Laboratori Nazionali del Gran Sasso (LNGS), Italy. Several ultra sensitive High Purity Germanium detectors (HPGe) have been used for gamma ray spectrometry. Mass spectrometry has been applied for a few low mass plastic samples. Detailed tables with the radioactive contaminations of all screened samples are presented, together with the implications for XENON100.Comment: 8 pages, 1 figur

Oval Domes: History, Geometry and Mechanics

An oval dome may be defined as a dome whose plan or profile (or both) has an oval form. The word Aoval@ comes from the latin Aovum@, egg. Then, an oval dome has an egg-shaped geometry. The first buildings with oval plans were built without a predetermined form, just trying to close an space in the most economical form. Eventually, the geometry was defined by using arcs of circle with common tangents in the points of change of curvature. Later the oval acquired a more regular form with two axis of symmetry. Therefore, an “oval” may be defined as an egg-shaped form, doubly symmetric, constructed with arcs of circle; an oval needs a minimum of four centres, but it is possible also to build polycentric ovals. The above definition corresponds with the origin and the use of oval forms in building and may be applied without problem until, say, the XVIIIth century. Since then, the teaching of conics in the elementary courses of geometry made the cultivated people to define the oval as an approximation to the ellipse, an “imperfect ellipse”: an oval was, then, a curve formed with arcs of circles which tries to approximate to the ellipse of the same axes. As we shall see, the ellipse has very rarely been used in building. Finally, in modern geometrical textbooks an oval is defined as a smooth closed convex curve, a more general definition which embraces the two previous, but which is of no particular use in the study of the employment of oval forms in building. The present paper contains the following parts: 1) an outline the origin and application of the oval in historical architecture; 2) a discussion of the spatial geometry of oval domes, i. e., the different methods employed to trace them; 3) a brief exposition of the mechanics of oval arches and domes; and 4) a final discussion of the role of Geometry in oval arch and dome design

Long-term durability of alumina ceramic heads in THA

Background: The optimal type of bearing for hip arthroplasty remains a matter of debate. Ceramic-on-polyethylene (CoP) bearings are frequently used in younger and more active patients to reduce wear and increase biocompatibility compared to Metal-on-Polyethylene (MoP) bearings. However, in comparison to metal heads, the fracture risk of ceramic heads is higher. In addition, ceramic head fractures pose a serious complication which often necessitates major revision surgery. To date, there are no long-term data (>20 years of follow-up) reporting fracture rates of the ceramic femoral heads in CoP bearings. The purpose of this research was to investigate long-term CoP fracture rate. Methods: We evaluated the clinical and radiographic results of 348 cementless THAs treated with 2nd generation Biolox® Al2O3 Ceramic-on-Polyethylene (CoP) bearings consecutively implanted between January 1985 and December 1989. The mean age at implantation was 57 years. The patients were followed for a minimum of 20 years. At the final 111 had died, and 5 were lost to follow-up. The cumulative incidence of ceramic head fractures in the long-term was estimated using a competing risk analysis. Results: The cumulative incidence of ceramic head fracture after 22-years was estimated with a competing risk analysis at 0.29% after 22-years (SE = 2.09%; 95% - CI: 0.03-1.5%). The radiographic analysis revealed no impending failures at final follow-up. Discussion/Conclusion: The fracture rate of second-generation ceramic heads using a CoP articulation remains very low into the third decade after cementless THA

Limits on uranium and thorium bulk content in GERDA Phase I detectors

Internal contaminations of $^{238}$U, $^{235}$U and $^{232}$Th in the bulk of high purity germanium detectors are potential backgrounds for experiments searching for neutrinoless double beta decay of $^{76}$Ge. The data from GERDA Phase~I have been analyzed for alpha events from the decay chain of these contaminations by looking for full decay chains and for time correlations between successive decays in the same detector. No candidate events for a full chain have been found. Upper limits on the activities in the range of a few nBq/kg for $^{226}$Ra, $^{227}$Ac and $^{228}$Th, the long-lived daughter nuclides of $^{238}$U, $^{235}$U and $^{232}$Th, respectively, have been derived. With these upper limits a background index in the energy region of interest from $^{226}$Ra and $^{228}$Th contamination is estimated which satisfies the prerequisites of a future ton scale germanium double beta decay experiment.Comment: 2 figures, 7 page

The background in the neutrinoless double beta decay experiment GERDA

The GERmanium Detector Array (GERDA) experiment at the Gran Sasso underground laboratory (LNGS) of INFN is searching for neutrinoless double beta decay of 76Ge. The signature of the signal is a monoenergetic peak at 2039 keV, the Q-value of the decay, Q_bb. To avoid bias in the signal search, the present analysis does not consider all those events, that fall in a 40 keV wide region centered around Q_bb. The main parameters needed for the neutrinoless double beta decay analysis are described. A background model was developed to describe the observed energy spectrum. The model contains several contributions, that are expected on the basis of material screening or that are established by the observation of characteristic structures in the energy spectrum. The model predicts a flat energy spectrum for the blinding window around Q_bb with a background index ranging from 17.6 to 23.8*10^{-3} counts/(keV kg yr). A part of the data not considered before has been used to test if the predictions of the background model are consistent. The observed number of events in this energy region is consistent with the background model. The background at Q-bb is dominated by close sources, mainly due to 42K, 214Bi, 228Th, 60Co and alpha emitting isotopes from the 226Ra decay chain. The individual fractions depend on the assumed locations of the contaminants. It is shown, that after removal of the known gamma peaks, the energy spectrum can be fitted in an energy range of 200 kev around Q_bb with a constant background. This gives a background index consistent with the full model and uncertainties of the same size