Advanced high-temperature electromagnetic pump

Three phase helical, electromagnetic induction pump for use as boiler feed pump in potassium Rankine-cycle power system is described. Techniques for fabricating components of pump are discussed. Specifications of pump are analyzed

Fabrication and test of a space power boiler feed electromagnetic pump. Part 2: Test facility and performance test

A three-phase helical induction electromagnetic pump, designed for the boiler-feed pump of a potassium Rankine-cycle space power system, was built and tested. The pump was tested over a range of potassium temperatures from 900 to 1400 F, flow rates from 0.75 to 4.85 lb/sec, developed pressures up to 340 psi, net positive suction heads (NPSH) from 1 to 22 psi, and NaK coolant temperatures from 800 to 950 F. The maximum efficiency at the pump design point of 3.25 lb/sec flow rate, 240 psi developed pressure, 1000 F potassium inlet temperature, and 800 F NaK coolant temperature was 16.3 percent. The tests also showed successful operation of the pump at an NPSH as low as 1.5 psi without cavitating

Polynucleotide encoding a gene conferring resistance to Bacillus thuringiensis toxins

Nucleic acid (DNA) probes are provided which will specifically identify a gene for resistance of Bt in insect populations. Sequences are identified associated with the onset of resistance to Bacillus thuringiensis toxins. The sequences are used as probes to monitor the presence of acquired insect resistance associated with transgenic crops

Fabrication and test of a space power boiler feed electromagnetic pump. Part 1: Design and manufacture of pump

A three-phase helical induction electromagnetic (EM) pump has been designed and built. This pump was designed for use as the boiler-feed pump of a potassium Rankine-cycle space electric power system. The pump is constructed of high temperature materials including a T-111 duct, Hiperco 27 magnetic material, nickel clad silver conductor wire, and a completely inorganic insulation system. The pump is designed to deliver 3.25 lb/sec potassium at 1000 F with a developed head of 240 psi while being cooled by 800 F NaK. At these conditions, the overall pump efficiency is expected to be 18%

The effect of cereal type and enzyme supplementation on carcass characteristics, volatile fatty acids and intestinal microflora and boar taint in entire male pigs

A 2 × 2 factorial experiment was conducted to investigate the effects of cereal type (barley v. oat) and exogenous enzyme supplementation (with or without) on intestinal fermentation, and on indole and skatole levels in the intestinal content and the adipose tissue in finisher boars. The experimental treatments were as follows: (i) barley-based diet, (ii) barley-based diet with enzyme supplement, (iii) oat-based diet and (iv) oat-based diet with enzyme supplement. The enzyme supplement contained endo-1,3(4)-β-glucanase (EC 3.2.1.6) and endo-1,4-β-xylanase (EC 3.2.1.8). The animals were fed ad libitum for 45 days from 76.0 to 113.6 kg live weight. Feeding barley-based diets led to higher (P 0.05) between the experimental treatments. Pigs offered the barley-based diets had lower (P < 0.001) indole concentrations in the adipose tissue compared with those fed the oat-based diet. In conclusion, barley-based diets were more efficient than oat-based diets in limiting concentrations of indole in the adipose tissu

Spectroscopic and mechanistic studies of dinuclear metallohydrolases and their biomimetic complexes

An enhanced understanding of the metal ion binding and active site structural features of phosphoesterases such as the glycerophosphodiesterase from Enterobacter aerogenes (GpdQ), and the organophosphate degrading agent from Agrobacterium radiobacter (OpdA) have important consequences for potential applications. Coupled with investigations of the metalloenzymes, programs of study to synthesise and characterise model complexes based on these metalloenzymes can add to our understanding of structure and function of the enzymes themselves. This review summarises some of our work and illustrates the significance and contributions of model studies to knowledge in the area

Automatic detection of pitching and throwing events in baseball with inertial measurement sensors

Purpose: Throwing loads are known to be closely related to injury risk. However, for logistic reasons, typically only pitchers have their throws counted, and then only during innings. Accordingly, all other throws made are not counted, so estimates of throws made by players may be inaccurately recorded and underreported. A potential solution to this is the use of wearable microtechnology to automatically detect, quantify, and report pitch counts in baseball. This study investigated the accuracy of detection of baseball pitching and throwing in both practice and competition using a commercially available wearable microtechnology unit. Methods: Seventeen elite youth baseball players (mean ± SD age 16.5 ± 0.8 y, height 184.1 ± 5.5 cm, mass 78.3 ± 7.7 kg) participated in this study. Participants performed pitching, fielding, and throwing during practice and competition while wearing a microtechnology unit. Sensitivity and specificity of a pitching and throwing algorithm were determined by comparing automatic measures (ie, microtechnology unit) with direct measures (ie, manually recorded pitching counts). Results: The pitching and throwing algorithm was sensitive during both practice (100%) and competition (100%). Specificity was poorer during both practice (79.8%) and competition (74.4%). Conclusions: These findings demonstrate that the microtechnology unit is sensitive to detect pitching and throwing events, but further development of the pitching algorithm is required to accurately and consistently quantify throwing loads using microtechnology

Recessionary changes at work and employee well-being: the protective roles of national- and workplace institutions

The recession following the 2008 financial crisis brought major changes to employees’ experiences at work. We investigate the adverse effects of two of such changes: perceived organizational distress and job deterioration. We also examine the extent to which institutions at national level (employment protection legislation and collective bargaining coverage) and at workplace level (employment contract and union membership) may act as buffers against these effects. Using data from 21 European countries, we show that recessionary changes were associated with reduced psychological well-being and greater levels of work–nonwork interference

Retarding field energy analyser ion current calibration and transmission

International audienceAccurate measurement of ion current density and ion energy distributions (IED) is often critical for plasma processes in both industrial and research settings. Retarding field energy analyzers (RFEA) have been used to measure IEDs because they are considered accurate, relatively simple and cost effective. However, their usage for critical measurement of ion current density is less common due to difficulties in estimating the proportion of incident ion current reaching the current collector through the RFEA retarding grids. In this paper an RFEA has been calibrated to measure ion current density from an ion beam at pressures ranging from 0.5 to 50.0 mTorr. A unique method is presented where the currents generated at each of the retarding grids and the RFEA upper face are measured separately, allowing the reduction in ion current to be monitored and accounted for at each stage of ion transit to the collector. From these I-V measurements a physical model is described. Subsequently, a mathematical description is extracted which includes parameters to account for grid transmissions, upper face secondary electron emission and collisionality. Pressure-dependant calibration factors can be calculated from least mean square best fits of the collector current to the model allowing quantitative measurement of ion current density