25 research outputs found

    Study of doubly strange systems using stored antiprotons

    Get PDF
    Bound nuclear systems with two units of strangeness are still poorly known despite their importance for many strong interaction phenomena. Stored antiprotons beams in the GeV range represent an unparalleled factory for various hyperon-antihyperon pairs. Their outstanding large production probability in antiproton collisions will open the floodgates for a series of new studies of systems which contain two or even more units of strangeness at the P‾ANDA experiment at FAIR. For the first time, high resolution γ-spectroscopy of doubly strange ΛΛ-hypernuclei will be performed, thus complementing measurements of ground state decays of ΛΛ-hypernuclei at J-PARC or possible decays of particle unstable hypernuclei in heavy ion reactions. High resolution spectroscopy of multistrange Ξ−-atoms will be feasible and even the production of Ω−-atoms will be within reach. The latter might open the door to the |S|=3 world in strangeness nuclear physics, by the study of the hadronic Ω−-nucleus interaction. For the first time it will be possible to study the behavior of Ξ‾+ in nuclear systems under well controlled conditions

    Produtividade da batata em função da irrigação e do controle químico da requeima Potato productivity as a function of irrigation and chemical control of Late Blight

    No full text
    Objetivou-se com esse trabalho determinar o efeito de diferentes níveis de irrigação e controle químico na produtividade e ocorr��ncia de requeima na cultura da batata, cultivar "Asterix", em Santa Maria, RS. Os experimentos foram realizados no Departamento de Fitotecnia da Universidade Federal de Santa Maria, o primeiro no verão de 2005/2006 e o segundo no outono de 2006. O delineamento experimental utilizado foi o de blocos ao acaso, com quatro repetições. Utilizou-se o sistema Blitecast para determinar o momento da aplicação de fungicidas, através do acúmulo de valores de severidade (VS). A irrigação foi realizada por aspersão, utilizando-se a dotação de 1,0 ETm, 0,75 ETm, 0,50 ETm e sem irrigação (Test). Os resultados mostraram que em períodos relativamente secos, com temperatura alta, a produtividade foi aumentada pela irrigação, sobretudo quando a necessidade hídrica da cultura foi atendida plenamente com a reposição de 100% da ETm. Em períodos úmidos a produtividade foi influenciada pela eficiência no controle da requeima. O sistema Blitecast com acúmulo de 18 valores de severidade (Bli18) foi o mais eficiente para o controle da requeima da batata. A irrigação realizada em intervalos de pelo menos três dias, não exerceu influência significativa sobre a incidência e o desenvolvimento da requeima.The objective of this study was to determine the effect of different levels of irrigation and chemical control on yield and occurrence of Late Blight in potato cv. Asterix, at Santa Maria - RS. Two experiments were conducted at the Crop Science Department, Federal University of Santa Maria. One experiment was carried out during spring-summer, 2005/2006 and the second, during fall 2006. The experimental design was a complete randomized, with four replications. The Blitecast model was used to indicate the timing of spraying, by accumulating severity values (VS). Sprinkler irrigation was used corresponding to 1.0, 0.75, 0.50 ETm and no irrigation. Results showed that in dry and high temperature periods, yield was affected by irrigation, mainly when crop water demand was supplied with 100% ETm. During wet periods, yield was affected by the efficient control of Late Blight. The Blitecast model with a severity value of 18 (Bli18) was the most efficient for controlling the disease. Irrigations applied at least every three days did not affect Late Blight incidence and development

    Necessidade de irrigação para o feijoeiro na região central do Rio Grande do Sul Irrigation necessity for common bean in central region of Rio Grande do Sul

    No full text
    A falta de conhecimento da probabilidade de ocorrência de adversidades climáticas representa um problema para o planejamento da produção do feijoeiro. Este estudo objetivou determinar os valores de lâmina de irrigação e do número de irrigações necessários para o feijão semeado em diferentes épocas, considerandose a capacidade de armazenamento de água disponível (CAD) dos principais solos da região Central do Rio Grande do Sul. A simulação do ciclo foi realizada utilizando-se a soma térmica, em dez épocas de semeadura (ES) e em cada ano da série histórica de dados meteorológicos, para o período entre 1968 e 2006. A irrigação foi simulada para 13 solos da região de abrangência da estação meteorológica de Santa Maria, que foram reunidos em seis grupos. Para simular a irrigação utilizaram-se quatro manejos: 0,8; 0,7; 0,6 e 0,5 os quais correspondem ao esgotamento máximo de 20, 30, 40 e 50% da CAD, respectivamente. A variação do conteúdo de água no solo foi determinada pelo balanço hídrico diário do solo, considerandose a irrigação. A maior exigência de irrigação ocorreu nas últimas ES do período da safra e a menor no início da safra e na safrinha. Para a probabilidade de 90% de ocorrência a lâmina de irrigação variou entre 32 e 143 mm e o número de irrigações entre 3 e 20, durante o ciclo de cultivo.The lack of knowledge about the likelihood of occurence of bad weather is a problem for production planning of the bean. This study aimed to determine the values of water depth and number of irrigations required for common bean at different sowing times, considering the storage capacity of available water (CAD) of the main soils of central region of Rio Grande do Sul . The cycle simulation was performed using the thermal time in ten sowing times (ES) and in each year of the historical series of meteorological data for the period between 1968 and 2006. Irrigation was simulated for 13 soils of the region covered by meteorological station of Santa Maria, which were grouped in six groups. To simulate the irrigation, four handlings were used: 0.8, 0.7, 0.6 and 0.5 corresponding to the maximum depletion of 20, 30, 40 and 50% of CAD, respectively. The variation of soil water content was determined by soil water balance, considering the irrigation. The greater demand for irrigation occurred in last sowing times of the main crop season and lowest at the begining of the main and second crop season. For the 90% probability of occurrence of the water depth ranged between 32 and 143 mm and the number of irrigations between 3 and 20 during cycle

    Evapotranspiração máxima e coeficiente de cultura da berinjela cultivada em estufa plástica

    No full text
    Apesar do cultivo da berinjela em estufa plástica ter aumentado no sul do Brasil, ainda é escasso o conhecimento sobre a evapotranspiração da cultura na condição de ambiente protegido para o manejo correto da irrigação. Objetivou-se determinar a evapotranspiração máxima e o coeficiente de cultura da berinjela cultivada em estufa plástica. Realizaram-se três experimentos em estufa plástica, dos quais dois na primavera dos anos de 2006 e 2007 e o outro no outono de 2007, na condição de clima subtropical úmido de Santa Maria, RS. As plantas foram cultivadas em camalhões de solo coberto por mulching plástico e irrigado por gotejamento. A evapotranspiração máxima da cultura foi medida em seis repetições de evapotranspirômetros de drenagem, contendo 20 L de substrato e uma planta. A evapotranspiração de referência foi estimada pelo método de Penman-Monteith. Verificou-se que a evapotranspiração máxima da cultura foi maior na primavera do que no outono enquanto o coeficiente de cultura foi maior no outono. Conclui-se que o coeficiente de cultura da berinjela cultivada em estufa plástica pode ser estimado com boa precisão em função dos dias após o transplante ou do índice de área foliar

    Evapotranspiração do pimentão em estufa plástica estimada com dados meteorológicos externos, na primavera Evapotranspiration cultivated in greenhouse of sweet pepper estimated with outside meteorology data in spring season

    No full text
    Neste trabalho o objetivo foi gerar e testar modelos matemáticos para a estimativa da evapotranspiração máxima para a cultura do pimentão, com variáveis meteorológicas medidas no exterior de estufa, na primavera, em Santa Maria, RS. Dois experimentos foram conduzidos, um no ano de 2005 e outro em 2006, visando à geração e aos testes dos modelos, respectivamente. A evapotranspiração foi medida em três lisímetros de drenagem e um lisímetro de balança. Foram feitas medições semanais da altura de plantas, do número de folhas e da área foliar. Os valores diários das variáveis meteorológicas externas foram obtidos na Estação Meteorológica Principal de Santa Maria, concluindo-se ser possível estimar, com precisão aceitável e em nível diário, a evapotranspiração máxima da cultura do pimentão em estufa, na primavera, com modelos matemáticos que utilizam variáveis medidas no exterior da estufa. O déficit de saturação do ar médio diário, a radiação solar global, o saldo de radiação e a evapotranspiração de referência medidos no exterior da estufa, foram as variáveis que apresentaram os melhores resultados na estimativa da evapotranspiração máxima da cultura do pimentão na primavera em estufa plástica.The objective of this work was to develop, test and validate mathematical models for maximum evapotranspiration estimations of a sweet pepper crop using meteorological variables measured outside the greenhouse, in Santa Maria, RS. Two experiments were conducted during spring of 2005 and 2006, for data collection, respectively for development and testing of models. The maximum evapotranspiration was measured using three drainage and one weighting lysimeter. Plant height, number of leaves and leaf area were weekly determined. The daily values of meteorological variables were obtained at the main Meteorological Station of Santa Maria. It is possible to estimate the maximum evapotranspiration of sweet pepper crop grown inside greenhouses during the spring with mathematical models that use various external measurements. Better estimations of maximum evapotranspiration of sweet pepper crop grown inside plastic greenhouse during the spring were obtained using meteorological variables, mean vapor pressure deficit, solar radiation, net radiation and reference evapotranspiration, measured outside the greenhouse. It was concluded that it is possible to estimate, with acceptable accuracy at daily level, the maximum crop evapotranspiration of sweet pepper grown in greenhouse in spring, using complex mathematical models that use meteorological variables measured outside the greenhouse

    Non-destructive models for leaf area determination in canola

    No full text
    ABSTRACT The leaf is a very important structure of the plants, since it allows gas exchanges and the transformation of light energy into chemical energy. This study aimed to generate and test mathematical models for leaf area estimation in canola based on leaf dimensions. Two experiments were conducted with canola in 2014, in which leaves were collected in different phenological stages with different sizes and shapes. Subsequently, leaf length, width and area were measured (with automatic meter) in 606 leaves, which included 371 ovate and 235 lanceolate leaves. The models were generated using length, width and length versus width as independent variables and leaf area as dependent variable. The models were validated using a group of leaves different from those used to generate the models. A total of 27 models were obtained and those with best statistics and higher simplicity were selected. The polynomial model LA = 0.88735 W2 + 0.93503 W and the power model LA = 1.1282 W1.9396 can be used for both types of leaves and have high accuracy in the estimation of canola leaf area
    corecore