26 research outputs found
Caracterización botánica de mieles argentinas
XV lnternational A.P.L.E. Symposium of Palynolog
Defect concentration in nitrogen-doped graphene grown on Cu substrate: A thickness effect
Tuning the band-gap of graphene is a current need for real device applications. Copper (Cu) as a substrate plays a crucial role in graphene deposition. Here we report the fabrication of in-situ nitrogen (N) doped graphene via chemical vapor deposition (CVD) technique and the effect of Cu substrate thickness on the growth mechanism. The ratio of intensities of G and D peaks was used to evaluate the defect concentration based on local activation model associated with the distortion of the crystal lattice due to incorporation of nitrogen atoms into graphene lattice. The results suggest that Cu substrate of 20 µm in thickness exhibits higher defect density (1.86×1012 cm−2) as compared to both 10 and 25 µm thick substrates (1.23×1012 cm−2 and 3.09×1011 cm−2, respectively). Furthermore, High Resolution -X-ray Photoelectron Spectroscopy (HR-XPS) precisely affirms ~0.4 at% of nitrogen intercalations in graphene. Our results show that the substitutional type of nitrogen doping dominates over the pyridinic configuration. In addition, X-ray diffraction (XRD) shows all the XRD peaks associated with carbon. However, the peak at ~24° is suppressed by the substrate peaks (Cu). These results suggest that nitrogen atoms can be efficiently incorporated into the graphene using thinner copper substrates, rather than the standard 25 µm ones. This is important for tailoring the properties by graphene required for microelectronic applications. © 2017 Elsevier B.V
On-Surface Driven Formal Michael Addition Produces m-Polyaniline Oligomers on Pt(111)
On-surface synthesis is emerging as a highly rational bottom-up methodology for the synthesis of molecular structures that are unattainable or complex to obtain by wet chemistry. Here, oligomers of meta-polyaniline, a known ferromagnetic polymer, were synthesized from para-aminophenol building-blocks via an unexpected and highly specific on-surface formal 1, 4 Michael-type addition at the meta position, driven by the reduction of the aminophenol molecule. We rationalize this dehydrogenation and coupling reaction mechanism with a combination of in situ scanning tunneling and non-contact atomic force microscopies, high-resolution synchrotron-based X-ray photoemission spectroscopy and first-principles calculations. This study demonstrates the capability of surfaces to selectively modify local molecular conditions to redirect well-established synthetic routes, such as Michael coupling, towards the rational synthesis of new covalent nanostructures
Nitrogen-modified nano-titania: True phase composition, microstructure and visible-light induced photocatalytic NOx abatement
Titanium dioxide (TiO2) is a popular photocatalyst used for many environmental and anti-pollution applications, but it normally operates under UV light, exploiting ∼5% of the solar spectrum. Nitrification of titania to form N-doped TiO2 has been explored as a way to increase its photocatalytic activity under visible light, and anionic doping is a promising method to enable TiO2 to harvest visible-light by changing its photo-absorption properties. In this paper, we explore the insertion of nitrogen into the TiO2 lattice using our green sol-gel nanosynthesis method, used to create 10 nm TiO2 NPs. Two parallel routes were studied to produce nitrogen-modified TiO2 nanoparticles (NPs), using HNO3+NH3 (acid-precipitated base-peptised) and NH4OH (totally base catalysed) as nitrogen sources. These NPs were thermally treated between 450 and 800°C. Their true phase composition (crystalline and amorphous phases), as well as their micro-/nanostructure (crystalline domain shape, size and size distribution, edge and screw dislocation density) was fully characterised through advanced X-ray methods (Rietveld-reference intensity ratio, RIR, and whole powder pattern modelling, WPPM). As pollutants, nitrogen oxides (NOx) are of particular concern for human health, so the photocatalytic activity of the NPs was assessed by monitoring NOx abatement, using both solar and white-light (indoor artificial lighting), simulating outdoor and indoor environments, respectively. Results showed that the onset of the anatase-to-rutile phase transformation (ART) occurred at temperatures above 450°C, and NPs heated to 450°C possessed excellent photocatalytic activity (PCA) under visible white-light (indoor artificial lighting), with a PCA double than that of the standard P25 TiO2 NPs. However, higher thermal treatment temperatures were found to be detrimental for visible-light photocatalytic activity, due to the effects of four simultaneous occurrences: (i) loss of OH groups and water adsorbed on the photocatalyst surface; (ii) growth of crystalline domain sizes with decrease in specific surface area; (iii) onset and progress of the ART; (iv) the increasing instability of the nitrogen in the titania lattice
Purely Visible-Light-Induced Photochromism in Ag-TiO2 Nanoheterostructures
We report titania nanoheterostructures decorated with silver, exhibiting tuneable photochromic properties for the first time when stimulated only by visible white light (domestic indoor lamp), with no UV wavelengths. Photochromic materials show reversible color changes under light exposure. However, all inorganic photochromic nanoparticles (NPs) require UV light to operate. Conventionally, multicolor photochromism in Ag-TiO2 films involves a change in color to brownish-gray during UV-light irradiation (i.e., reduction of Ag+ to Ag0) and a (re)bleaching (i.e., (re)oxidation of Ag0 to colorless Ag+) upon visible-light exposure. In this work, on the contrary, we demonstrate visible-light-induced photochromism (ranging from yellow to violet) of 1-10 mol % Ag-modified titania NPs using both spectroscopic and colorimetric CIEL ab∗ analyses. This is not a bleaching of the UV-induced color but a change in color itself under exposure to visible light, and it is shown to be a completely different mechanism - driven by the interfacial charge transfer of an electron from the valence band of TiO2 to that of the AgxO clusters that surround the titania - to the usual UV-triggered photochromism reported in titania-based materials. The quantity of Ag or irradiation time dictated the magnitude and degree of tuneability of the color change, from pale yellow to dark blue, with a rapid change visible only after a few seconds, and the intensity and red shift of surface plasmon resonance induced under visible light also increased. This effect was reversible after annealing in the dark at 100 °C/15 min. Photocatalytic activity under visible light was also assessed against the abatement of nitrogen oxide pollutants, for interior use, therefore showing the coexistence of photochromism and photocatalysis - both triggered by the same wavelength - in the same material, making it a multifunctional material. Moreover, we also demonstrate and explain why X-ray photoelectron spectroscopy is an unreliable technique with such materials
Sustainable iron-carbon magnetic composites for the removal of pharmaceuticals from wastewater
On-Surface Bottom-Up Synthesis of Azine Derivatives Displaying Strong Acceptor Behavior
On-surface synthesis is an emerging approach to obtain, in a single step, precisely defined chemical species that cannot be obtained by other synthetic routes. The control of the electronic structure of organic/metal interfaces is crucial for defining the performance of many optoelectronic devices. A facile on-surface chemistry route has now been used to synthesize the strong electron-acceptor organic molecule quinoneazine directly on a Cu(110) surface, via thermally activated covalent coupling of para-aminophenol precursors. The mechanism is described using a combination of in situ surface characterization techniques and theoretical methods. Owing to a strong surface-molecule interaction, the quinoneazine molecule accommodates 1.2 electrons at its carbonyl ends, inducing an intramolecular charge redistribution and leading to partial conjugation of the rings, conferring azo-character at the nitrogen sites
Investigation of temperature and frequency dependence of the dielectric properties of multiferroic (La0.8Ca0.2)0.4Bi0.6FeO3 nanoparticles for energy storage application
In this work we synthesized the multifunctional (La0.8Ca0.2)0.4Bi0.6FeO3 material using a sol-gel process. Structural and morphologic investigations reveal a Pnma perovskite structure at room temperature with spherical and polygonal nanoparticles. A detailed study of the temperature dependence of the dielectric and electrical properties of the studied material proves a typical FE-PE transition with a colossal value of real permittivity at 350 K that allows the use of this material in energy storage devices. Thus, the investigation of the frequency dependence of the ac conductivity proves a correlated barrier hopping (CBH) conduction mechanism to be dominant in the temperature ranges of 150-170 K; the two observed Jonscher's power law exponents, s 1 and s 2 between 180 K and 270 K correspond to the observed dispersions in the ac conductivity spectra in this temperature region, unlike in the temperature range of 250-320 K, the small polaron tunnel (NSPT) was considered the appropriate conduction model
Quantitative XRD characterisation and gas-phase photocatalytic activity testing for visible-light (indoor applications) of KRONOClean 7000®
Carbon-modified commercial anatase (KRONOClean 7000®) was quantitatively characterised with XRD for the first time-full phase composition (both crystalline and amorphous content) and microstructure. The material was found to be bimodal anatase, mostly ∼4 nm diameter, but with a small amount of a larger fraction between ∼12 and 15 nm. Absorption in the visible range was confirmed by UV-Vis analysis, whilst XPS showed that an aromatic carbon compound is at the origin of that absorption. Also, the photocatalytic activity of this commercial nano-TiO2 was assessed, monitoring the abatement of NOx using a white LED lamp, irradiating exclusively in the visible region. Experiments simulated an indoor environment, highlighting the potential of this nano-TiO2 for adoption as a standard for visible-light photocatalytic activity, i.e. applications for innovative interior eco-building materials