Use of wastes to create new building materials

This paper is a teaching activity carried out on the subject of Building Materials from Building Engineering studies. This subject is developed in the second year and lasts for a four month period. The student teacher ratio is around 60:1. The goal of this work was the development of a new building material obtained from waste materials. Students were divided in teams of three students chosen by themselves. This activity helped students to develop knowledge about different materials and make them aware of the importance and possibilities to profit waste materials. Students should work with materials studied in the subject, mainly clay, glass, steel, wood and plastics. Before beginning they must do an important bibliographic research about the topic they wanted to develop. The university provided the use of lab facilities and the guidance of the teacher. Besides following up the work, the teacher encouraged the students to perform some tests on the new material obtained. Finally they should come out with a poster and a sample of the material. Results got from different works differed substantially according to the interest and time dedicated to them. Most of the students abused of the use of polymeric resins to elaborate the new materials, and therefore, even using wastes the new materials were not so sustainable. The use of natural materials such as cane fibres leaded to materials with interesting insulation and structural properties. It was a very good experience to attract students to materials research. Finally we discovered in order to get profitable results, this kind of activity should cover a longer period and should count with the continuous guidance of the teachers.Postprint (published version

Estudio del proceso de cambio conceptual y la construcción del modelo científico precursor de ser vivo en niños de pre-escolar

La presente investigación estudia el cambio conceptual y la construcción de modelos científicos precursores en un contexto socioconstructivista con niños pequeños, utilizando una metodología cualitativa. Se analizan los cambios epistemológicos y ontológicos en las concepciones de los niños acerca de los seres vivos y cómo una estrategia didáctica basada en la construcción de un modelo científico precursor basado en propiedades biológicas los promueven. Los cambios en la comprensión de los niños fueron significativos en las dimensiones ontológicas y epistemológicas, presentando diferentes patones. Los segundos proporcionaron una mejor coherencia explicativa en su sistema conceptual contribuyendo, de esta forma, a los cambios ontológicos y promoviendo, a su vez, la construcción del modelo científico precursor de ser vivo

¿Qué opinan los futuros maestros sobre el aprendizaje de las ciencias a través de la indagación y sobre sus necesidades formativas?

The application of an open-ended questionnaire allows us to detect some ideas about inquiry in preservice Primary teachers. A first analysis allows us to categorize the type of answers. In general, the majority of students ask for more theoretical contents about science, since they are not confidence in being involved in science teaching without this background. A great scattering of answers appears when students are asked for inquiry in the Primary classrooms. Finally, no coherent answers are detected when students declare that they want to learn “more scientific contents” (90%), whereas less than 50% of them would like to be taught about this issue

Impact of growth conditions on the domain nucleation and domain wall propagation in Pt/Co/Pt stacks

Understanding the effect of fabrication conditions on domain wall (DW) motion in thin films with perpendicular magnetization is a mandatory issue in order to tune their properties aiming to design spintronics devices based on such phenomenon. In this context, the present work intends to show how different growth conditions may affect DW motion in the prototypical system Pt/Co/Pt. The trilayers were deposited by dc sputtering, and the parameters varied in this study were the Co thickness, the substrate roughness and the base pressure in the deposition chamber. Magneto-optical Kerr effect-based magnetometry and microscopy combined with x-ray reflectometry, atomic force microscopy and transmission electron microscopy were adopted as experimental techniques. This permitted us to elucidate the impact on the hysteresis loops and on the DW dynamics, produced by different growth conditions. As other authors, we found that Co thickness is strongly determinant for both the coercive field and the DW velocity. On the contrary, the topographic roughness of the substrate and the base pressure of the deposition chamber evidence a selective impact on the nucleation of magnetic domains and on DW propagation, respectively, providing a tool to tune these properties. </p

Reproductive biology of Macleania rupestris (Ericaceae), a pollen-limited Neotropical cloud-forest species in Costa Rica

Sin abstractVicerrectoría de Investigación, Universidad de Costa Rica, MICIT-CONICYTUCR::Vicerrectoría de Docencia::Ciencias Básicas::Facultad de Ciencias::Escuela de Biologí

Controlled transdermal release of antioxidant ferulate by a porous Sc(III) MOF

The Sc(III) MOF-type MFM-300(Sc) is demonstrated in this study to be stable under physiological conditions (PBS), biocompatible (to human skin cells), and an efficient drug carrier for the long-term controlled release (through human skin) of antioxidant ferulate. MFM-300(Sc) also preserves the antioxidant pharmacological effects of ferulate while enhancing the bio-preservation of dermal skin fibroblasts, during the delivery process. These discoveries pave the way toward the extended use of Sc(III)-based MOFs as drug delivery systems (DDSs)

In-situ and Ex-situ characterization of III-V semiconductor materials and solar cells upon 10 MEV proton irradiation

In this work we present the results and analysis of a 10 MeV proton irradiation experiment performed on III-V semiconductor materials and solar cells. A set of representative devices including lattice-matched InGaP/GaInAs/Ge triple junction solar cells and single junction GaAs and InGaP component solar cells and a Ge diode were irradiated for different doses. The devices were studied in-situ before and after each exposure at dark and 1 sun AM0 illumination conditions, using a solar simulator connected to the irradiation chamber through a borosilicate glass window. Ex-situ characterization techniques included dark and 1 sun AM0 illumination I-V measurements. Furthermore, numerical simulation of the devices using D-AMPS-1D code together with calculations based on the TRIM software were performed in order to gain physical insight on the experimental results. The experiment also included the proton irradiation of an unprocessed Ge solar cell structure as well as the irradiation of a bare Ge(100) substrate. Ex-situ material characterization, after radioactive deactivation of the samples, includes Raman spectroscopy and spectral reflectivity

Distribution and infection of triatomines (Hemiptera: Reduviidae) by Trypanosoma cruzi in the state of Michoacán, Mexico

An entomological study of triatomine species was carried out to assess their prevalence in 10 localities of the state of Michoacán, Mexico. Entomological indices were calculated to estimate the risk for vector-borne transmission of Trypanosoma cruzi to the human population in this area. Four triatomine species (Triatoma barberi, Triatoma dimidiata, Meccus pallidipennis and Meccus longipennis) were collected from the study area. This is the first report of M. longipennis and T. dimidiata in Michoacán. M. pallidipennis was significantly (p < 0.05) more abundant than any of the other species collected in the study area. Infection indices were greater than 50% for each of the four collected triatomine species. Significantly more triatomines were collected from intradomiciliary areas than from peridomiciliary or sylvatic areas. Infestation, crowding and density indices were low, whereas colonisation indices were high in five localities. The current vectorial conditions in the study area require continuous entomological and serological surveillance to diminish the risk of T. cruzi transmission to human populations

Truncated and Helix-Constrained Peptides with High Affinity and Specificity for the cFos Coiled-Coil of AP-1

Protein-based therapeutics feature large interacting surfaces. Protein folding endows structural stability to localised surface epitopes, imparting high affinity and target specificity upon interactions with binding partners. However, short synthetic peptides with sequences corresponding to such protein epitopes are unstructured in water and promiscuously bind to proteins with low affinity and specificity. Here we combine structural stability and target specificity of proteins, with low cost and rapid synthesis of small molecules, towards meeting the significant challenge of binding coiled coil proteins in transcriptional regulation. By iteratively truncating a Jun-based peptide from 37 to 22 residues, strategically incorporating i-->i+4 helix-inducing constraints, and positioning unnatural amino acids, we have produced short, water-stable, alpha-helical peptides that bind cFos. A three-dimensional NMR-derived structure for one peptide (24) confirmed a highly stable alpha-helix which was resistant to proteolytic degradation in serum. These short structured peptides are entropically pre-organized for binding with high affinity and specificity to cFos, a key component of the oncogenic transcriptional regulator Activator Protein-1 (AP-1). They competitively antagonized the cJun–cFos coiled-coil interaction. Truncating a Jun-based peptide from 37 to 22 residues decreased the binding enthalpy for cJun by ~9 kcal/mol, but this was compensated by increased conformational entropy (TDS ≤ 7.5 kcal/mol). This study demonstrates that rational design of short peptides constrained by alpha-helical cyclic pentapeptide modules is able to retain parental high helicity, as well as high affinity and specificity for cFos. These are important steps towards small antagonists of the cJun-cFos interaction that mediates gene transcription in cancer and inflammatory diseases

Hydrography of the Pontevedra Ria: Intra-annual spatial and temporal variability in a Galician coastal system (NW Spain)

In order to ameliorate the dearth of existing scientific knowledge concerning the hydrography of the Pontevedra Ria, a systematic investigation was carried out between October 1997-98. Salinity variations were closely related to river discharge whereas bottom waters presented oceanic characteristics over the whole year. Current was controlled by tide, river discharge, and wind in the internal ria where the highest velocities were directed along the ria channel with a low transverse component. Favorable atmospheric conditions in spring induced coastal upwelling up the continental shelf. In May the upwelling was sufficiently strong to be detected in the inner ria and intensified in July and August, cooling the ria water to 12 degrees -14 degreesC. Upwelling ceased in September, and from November to March seawater transported by the poleward current (35.9; 15 degreesC) was detected on the shelf. From January until March, unanticipated favorable upwelling conditions provoked an influx of poleward inside the ria. Ria intrusion of poleward water and association with occasional winter upwelling conditions has not been observed previously. Isopycnic three-dimensional (3-D) surface and 2-D isopycnal maps show that with high river runoff or intense upwelling, lower-salinity water leaves the ria near the northern margin in the surface layer. Under negative upwelling conditions, the water is partially dammed inside the ria and exits the ria when the wind speed falls. During upwelling events, ENACW penetrated the ria, especially near the southern shore. Arrival of ENACW at the northern entrance impedes the outward water flow through this mouth