Concentration dependent structural, thermal, and optical features of Pr 3+-doped multicomponent tellurite glasses

Tuning the structural, thermal, and optical properties of low phonon energy glasses such as tellurite glasses (phonon energy ∼750 cm−1) with suitable rare earth dopants is a key issue in the fabrication of solid state lasers and optical amplifiers. In this work, (70-x) TeO2-10 WO3-10 ZnO-5 TiO2-5 Na2O-(x) Pr2O3 (x = 1.0–5.0 mol %) glasses were synthesized with high optical quality and characterized using X-ray diffraction (XRD), Scanning electron microscopy and Energy dispersive X-ray analysis (SEM-EDAX), Attenuated total reflectance-Fourier transform infrared (ATR-FTIR), Raman spectroscopy, Thermo-gravimetric analysis (TGA), Differential scanning calorimetry (DSC), optical absorption and luminescence techniques. The XRD and SEM measurements reveal the amorphous nature of all the prepared glasses and EDAX confirms all the elements present in the respective glasses. The presence of various functional groups such as stretching vibrations of Te[single bond]–O bonds in the [TeO4] trigonal bi-pyramid units, symmetrical stretching or bending vibrations of Te[single bond]–O[single bond]–Te or O[single bond]–Te[single bond]–O linkages at corner sharing sites along the chains of TeO4, TeO3 and TeO3+1, stretching vibrations of W[single bond]–O– and W[double bond; length as m-dash]═O bonds in WO4 tetragonal or WO6 octagonal units, vibrations of Zn[single bond]–O bonds from ZnO4 groups, including non-hygroscopic nature of the glasses are confirmed by ATR-FTIR and Raman spectra, respectively. For Pr3+-doped glasses, from the DSC profiles the glass transition temperature (Tg), onset crystallization temperature (Tx), crystallization temperature (Tc), and melting temperature (Tm) are identified and the evaluated thermal stability values varied in the temperature range of 169–220 °C with increasing Pr3+ doping concentration. Further, the Pr3+ -doped tellurite glasses demonstrate excellent glass stability with higher criterion of Hruby's value (HR) between 1.9 and 3.9. From the measured optical absorption spectrum, experimental oscillator strengths are calculated and used to evaluate three phenomenological Judd-Ofelt (J-O) intensity parameters Ω_λ_ (_λ_ = 2, 4 and 6) and respective radiative properties such as radiative transition probabilities (AR), the branching ratios (βR), and the radiative lifetime (τR) of metastable states for 1.0 mol % Pr3+-doped glass. Five main emission transitions at 3P0 → 3H5 (530 nm; green) with a shoulder at 543 nm, a weak band at 1D2 → 3H4 (592 nm; orange), 3P0 → 3H6 (615 nm; orange), 3P0 → 3F2 (649 nm; red), and 3P0 → 3F3 (686 nm; red) upon exciting at 486 nm (3H4 → 3P0) wavelength are observed from the luminescence spectra of Pr3+-doped tellurite glasses. Following the energy level diagram, Pr3+ ion concentration quenching on the luminescence intensity has been explained by a non-radiative energy transfer between the ions through cross-relaxation and energy migration processes. The concentration dependent structural, thermal, and optical behaviors of Pr 3+-doped tellurite glasses are understood and our systematic analysis could contribute towards the development of suitable optical devices fabrication. Raman spectra of all the synthesized glasses

Dynamics and Chemistry of Marine Stratocumulus (DYCOMS) Experiment

A combined atmospheric chemistry-meteorology experiment, the Dynamics and Chemistry of the Marine Stratocumulus (DYCOMS), was carried out during the summer of 1985 over the eastern Pacific Ocean using the NCAR Electra aircraft. The objectives were to 1) study the budgets of several trace reactive species in a relatively pristine, steady-state, horizontally homogeneous, well-mixed boundary layer capped by a strong inversion and 2) study the formation, maintenance and dissipation of marine stratocumulus that persists off the California coast (as well as similar regions elsewhere) in summer. We obtained both mean and turbulence measurements of meteorological variables within and above the cloud-capped boundary layer that is typical of this region. Ozone was used successfully as a tracer for estimating entrainment rate. We found, however, that horizontal variability was large enough for ozone that a correction needs to be included in the ozone budget for the horizontal displacement due to turns even though the airplane was allowed to drift with the wind. The time rate-of-change term was significant in both the ozone and radon budgets; as a result, a considerably longer time interval than the two hours used between sets of flight legs would be desirable to improve the measurement accuracy of this term

Transport and superconducting properties of Fe-based superconductors: SmFeAs(O1-x Fx) versus Fe1+y (Te1-x, Sex)

We present transport and superconducting properties - namely resistivity, magnetoresistivity, Hall effect, Seebeck effect, thermal conductivity, upper critical field - of two different families of Fe-based superconductors, which can be viewed in many respects as end members: SmFeAs(O1-xFx) with the largest Tc and the largest anisotropy and Fe1+y(Te1-x,Sex), with the largest Hc2, the lowest Tc and the lowest anisotropy. In the case of the SmFeAs(O1-xFx) series, we find that a single band description allows to extract an approximated estimation of band parameters such as carrier density and mobility from experimental data, although the behaviour of Seebeck effect as a function of doping demonstrates that a multiband description would be more appropriate. On the contrary, experimental data of the Fe1+y(Te1-x,Sex) series exhibit a strongly compensated behaviour, which can be described only within a multiband model. In the Fe1+y(Te1-x,Sex) series, the role of the excess Fe, tuned by Se stoichiometry, is found to be twofold: it dopes electrons in the system and it introduces localized magnetic moments, responsible for Kondo like scattering and likely pair-breaking of Cooper pairs. Hence, excess Fe plays a crucial role also in determining superconducting properties such as the Tc and the upper critical field Bc2. The huge Bc2 values of the Fe1+y(Te1-x,Sex) samples are described by a dirty limit law, opposed to the clean limit behaviour of the SmFeAs(O1-xFx) samples. Hence, magnetic scattering by excess Fe seems to drive the system in the dirty regime, but its detrimental pairbreaking role seems not to be as severe as predicted by theory. This issue has yet to be clarified, addressing the more fundamental issue of the interplay between magnetism and superconductivity

Structural, thermal, and optical analysis of zinc boro-aluminosilicate glasses containing different alkali and alkaline modifier ions

In this article, structural, thermal, and optical properties of zinc boro-aluminosilicate glasses with addition of different alkali (Li, Na, and K) and alkaline oxides (Mg, Ca, Sr, and Ba) have been reported. 10 mol% of alkali and alkaline oxides were incorporated into Zinc boro-aluminosilicate glasses and all these glasses possess high optical quality. Samples were characterized using X-ray diffraction (XRD), scanning electron microscopy and energy dispersive X-ray analysis (SEM-EDAX), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, Raman spectroscopy, thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC), and optical absorption spectroscopy. The XRD and SEM measurements demonstrated the amorphous origin for all the prepared glasses and EDAX confirms that all the elements are presented in the prepared glasses. The presence of various functional groups such as triangular and tetrahedral-borate (BO3 and BO4) was confirmed by ATR-FTIR and Raman spectra, and both of the ATR-FTIR and Raman spectra show lower phonon energy for H3 (K2O) in alkali series, and H7 (BaO) for alkaline. From TGA analysis we found a lower weight loss < 0.1% in K2O, MgO, and BaO; and from the DSC profiles the glass transition temperature (Tg), onset crystallization temperature (Tx), crystallization temperature (Tc), and melting temperature (Tm) were identified and related different thermal parameters are evaluated. Alkali and alkaline influenced Zinc boro-aluminosilicate glasses demonstrate excellent glass stability. From the optical absorption spectra, we calculated cut-off wavelength and it shows spectral shifting to longer wavelength with alkali (Li → Na → K), and alkaline (Mg → Ca → Sr → Ba) modifiers. We investigated optical band gap energy also for allowed transitions in UV–visible region using three methods; direct, indirect, and absorption spectrum fitting (ASF)

Germanate oxide impacts on the optical and gamma radiation shielding properties of TeO2-ZnO-Li2O glass system

In this work, a series of tellurite glass combined with various concentrations of germanium oxide was fabricated according to the formula of (70-x)TeO2-xGeO2–20ZnO-10Li2O where x = 5, 10, 15 and 20 mol% via utilizing the melt-quench method for possible use in a radiation shielding applications. X-ray diffraction and Attenuated Total Reflectance Fourier Transform Infrared was employed to investigate the structure of the synthesized glasses. The density and Poisson's ratio for current samples reduced gradually from 5.221–5.008 g.cm−3 and 0.134–0.131, respectively, while the enhancement in bandgap values from 3.700–3.872 eV with addition of GeO2 is observed. The linear attenuation coefficient values at 0.015 MeV are 230.123 and 236.832 cm−1 for samples TG1 and TG4, respectively. Moreover, the lowest half-value layer attained via TG1 and raises from 0.0030 to 3.6684 cm while the highest HVL attained by TG4 and raises from 0.0029 to 3.9696 cm

Investigation of structural, thermal properties and shielding parameters for multicomponent borate glasses for gamma and neutron radiation shielding applications

Multicomponent borate glasses with the chemical composition (60 − x) B2O3–10 Bi2O3–10 Al2O3–10 ZnO–10 Li2O–(x) Dy2O3 or Tb4O7 (x = 0.5 mol%), and (60 − x − y) B2O3–10 Bi2O3–10 Al2O3–10 ZnO–10 Li2O–(x) Dy2O3–(y) Tb4O7 (x = 0.25, 0.5, 0.75, 1.0, 1.5, and 2.0 mol%, y = 0.5 mol%) have been fabricated by a conventional melt-quenching technique and were characterized by X-ray diffraction (XRD), Attenuated Total reflectance-Fourier transform Infrared (ATR-FTIR) spectroscopy, Raman spectroscopy, thermo-gravimetric analysis (TGA), and differential scanning calorimetry (DSC). Also, the radiation shielding parameters such as mass attenuation coefficient (μ/ρ), half value layer (HVL), mean free path (MFP) and exposure buildup factor (EBF) values were explored within the energy range 0.015 MeV–15 MeV using both XCOM and MCNPX code to determine the penetration of gamma and neutron radiations in the prepared glasses. The main BO3, BO4, BiO6, and ZnO4 structural units and AlOAl bonds were confirmed by ATR-FTIR and Raman spectroscopy. Weight loss, and the glass transition (Tg), onset crystallization (Tx), and crystallization (Tc) temperatures were determined from TGA and DSC measurements, respectively. The stability of the glass against crystallization (ΔT) is varied within the temperature range 114–135 °C for the studied glasses. In addition, the shielding parameters like the (μ/ρ) values investigated using both MCNPX Monte Carlo and XCOM software are in good agreement with each other. The (μ/ρ) values calculated using XCOM software were used to evaluate the HVL and MFP in the photon energy range 0.015 MeV–15 MeV. It is found that all the synthesized glasses possess better shielding properties than ordinary concrete, zinc oxide soda lime silica glass and lead zinc phosphate glass indicating the high potentiality of the prepared glasses to be utilized as radiation shielding materials

Sodium Iodate Selectively Injuries the Posterior Pole of the Retina in a Dose-Dependent Manner: Morphological and Electrophysiological Study

Sequential morphological and functional features of retinal damage in mice exposed to different doses (40 vs. 20 mg/kg) of sodium iodate (NaIO3) were analyzed. Retinal morphology, apoptosis (TUNEL assay), and function (electroretinography; ERG) were examined at several time points after NaIO3 administration. The higher dose of NaIO3 caused progressive degeneration of the whole retinal area and total suppression of scotopic and photopic ERG. In contrast, the lower dose induced much less severe degeneration in peripheral part of retina along with a moderate decline of b- and a-wave amplitudes in ERG, corroborating the presence of regions within retina that retain their function. The peak of photoreceptor apoptosis was found on the 3rd day, but the lower dose induced more intense reaction within the central retina than in its peripheral region. In conclusion, these results indicate that peripheral area of the retina reveals better resistance to NaIO3 injury than its central part

GlyT2+ Neurons in the Lateral Cerebellar Nucleus

The deep cerebellar nuclei (DCN) are a major hub in the cerebellar circuitry but the functional classification of their neurons is incomplete. We have previously characterized three cell groups in the lateral cerebellar nucleus: large non-GABAergic neurons and two groups of smaller neurons, one of which express green fluorescence protein (GFP) in a GAD67/GFP mouse line and is therefore GABAergic. However, as a substantial number of glycinergic and glycine/GABA co-expressing neurons have been described in the DCN, this classification needed to be refined by considering glycinergic neurons. To this end we took advantage of a glycine transporter isoform 2 (GlyT2)-eGFP mouse line that allows identification of GlyT2-expressing, presumably glycinergic neurons in living cerebellar slices and compared their electrophysiological properties with previously described DCN neuron populations. We found two electrophysiologically and morphologically distinct sets of GlyT2-expressing neurons in the lateral cerebellar nucleus. One of them showed electrophysiological similarity to the previously characterized GABAergic cell group. The second GlyT2+ cell population, however, differed from all other so far described neuron types in DCN in that the cells (1) are intrinsically silent in slices and only fire action potentials upon depolarizing current injection and (2) have a projecting axon that was often seen to leave the DCN and project in the direction of the cerebellar cortex. Presence of this so far undescribed DCN neuron population in the lateral nucleus suggests a direct inhibitory pathway from the DCN to the cerebellar cortex

Epstein–Barr virus renders the infected natural killer cell line, NKL resistant to doxorubicin-induced apoptosis

We established two Epstein–Barr virus (EBV)-infected NKL sublines, which acquired stress resistant phenotype against DNA damage and starvation compared with EBV-negative NKL. EBV-rendered doxorubicin resistance at least partially through NF-κB activation and the resultant sustenance of antiapoptotic proteins including Bcl-XL and FLIPL/S

Intervention Services for Autistic Adults: An ASDEU Study of Autistic Adults, Carers, and Professionals' Experiences

The Autism Spectrum Disorders in the European Union (ASDEU) survey investigated local services' use experiences of autistic adults, carers and professionals with interventions for autistic adults. The majority of the 697 participants experienced recommended considerations prior to deciding on intervention and during the intervention plan and implementation. Psychosocial interventions were the most commonly experienced interventions, while pharmacological interventions NOT recommended for core autistic symptoms were reported by fairly large proportions of participants. Family interventions were experienced slightly more commonly by carers than adults or professionals. Less than the 26% of autistic adult responders who had experienced challenging behaviors reported receiving an intervention to change them. These results provide insights for improving gaps in service provision of interventions among autistic adults.Peer reviewe